[pull request][V4 net 00/15] mlx5 fixes 2022-10-14

[pull request][V4 net 00/15] mlx5 fixes 2022-10-14

[Saeed Mahameed]

From: Saeed Mahameed <saeedm@nvidia.com>

v3->v4:
  Drop the SF commit to comply with 15 patch limit and avoid build break

v2->v3:
  Initialize sf_dev->sf_table mutex at correct location

v1->v2:
  add missing sign-off.

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.

Thanks,
Saeed.


The following changes since commit c5f0a17288740573f4de72965c5294a60244c5fc:

  rhashtable: make test actually random (2022-10-26 13:39:09 +0100)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git tags/mlx5-fixes-2022-10-26

for you to fetch changes up to efe8b237ea42d8e57f030136cd5c9b99318b9885:

  net/mlx5e: Fix macsec sci endianness at rx sa update (2022-10-26 14:44:29 +0100)

----------------------------------------------------------------
mlx5-fixes-2022-10-26

----------------------------------------------------------------
Ariel Levkovich (1):
      net/mlx5e: TC, Reject forwarding from internal port to internal port

Aya Levin (1):
      net/mlx5e: Extend SKB room check to include PTP-SQ

Hyong Youb Kim (1):
      net/mlx5e: Do not increment ESN when updating IPsec ESN state

Moshe Shemesh (1):
      net/mlx5: Wait for firmware to enable CRS before pci_restore_state

Paul Blakey (1):
      net/mlx5e: Update restore chain id for slow path packets

Raed Salem (4):
      net/mlx5e: Fix macsec coverity issue at rx sa update
      net/mlx5e: Fix macsec rx security association (SA) update/delete
      net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
      net/mlx5e: Fix macsec sci endianness at rx sa update

Roi Dayan (1):
      net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed

Rongwei Liu (1):
      net/mlx5: DR, Fix matcher disconnect error flow

Roy Novich (1):
      net/mlx5: Update fw fatal reporter state on PCI handlers successful recover

Saeed Mahameed (1):
      net/mlx5: ASO, Create the ASO SQ with the correct timestamp format

Suresh Devarakonda (1):
      net/mlx5: Fix crash during sync firmware reset

Tariq Toukan (1):
      net/mlx5: Fix possible use-after-free in async command interface

 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      | 10 +--
 drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h   |  9 +++
 .../net/ethernet/mellanox/mlx5/core/en/tc_priv.h   |  2 +
 drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h  |  6 ++
 .../ethernet/mellanox/mlx5/core/en_accel/ipsec.c   |  3 -
 .../ethernet/mellanox/mlx5/core/en_accel/macsec.c  | 16 ++---
 .../mellanox/mlx5/core/en_accel/macsec_fs.c        |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    | 78 +++++++++++++++++++++-
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c    |  6 ++
 drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c | 17 +++++
 drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c  |  7 ++
 drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c |  6 +-
 drivers/net/ethernet/mellanox/mlx5/core/main.c     |  4 ++
 .../ethernet/mellanox/mlx5/core/steering/dr_rule.c |  3 +-
 include/linux/mlx5/driver.h                        |  2 +-
 15 files changed, 146 insertions(+), 25 deletions(-)

[V4 net 01/15] net/mlx5e: Do not increment ESN when updating IPsec ESN state

[Saeed Mahameed]

From: Hyong Youb Kim <hyonkim@cisco.com>

An offloaded SA stops receiving after about 2^32 + replay_window
packets. For example, when SA reaches <seq-hi 0x1, seq 0x2c>, all
subsequent packets get dropped with SA-icv-failure (integrity_failed).

To reproduce the bug:
- ConnectX-6 Dx with crypto enabled (FW 22.30.1004)
- ipsec.conf:
  nic-offload = yes
  replay-window = 32
  esn = yes
  salifetime=24h
- Run netperf for a long time to send more than 2^32 packets
  netperf -H <device-under-test> -t TCP_STREAM -l 20000

When 2^32 + replay_window packets are received, the replay window
moves from the 2nd half of subspace (overlap=1) to the 1st half
(overlap=0). The driver then updates the 'esn' value in NIC
(i.e. seq_hi) as follows.

 seq_hi = xfrm_replay_seqhi(seq_bottom)
 new esn in NIC = seq_hi + 1

The +1 increment is wrong, as seq_hi already contains the correct
seq_hi. For example, when seq_hi=1, the driver actually tells NIC to
use seq_hi=2 (esn). This incorrect esn value causes all subsequent
packets to fail integrity checks (SA-icv-failure). So, do not
increment.

Fixes: cb01008390bb ("net/mlx5: IPSec, Add support for ESN")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
index 2a8fd7020622..a715601865d3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
@@ -101,7 +101,6 @@ static bool mlx5e_ipsec_update_esn_state(struct mlx5e_ipsec_sa_entry *sa_entry)
 	struct xfrm_replay_state_esn *replay_esn;
 	u32 seq_bottom = 0;
 	u8 overlap;
-	u32 *esn;
 
 	if (!(sa_entry->x->props.flags & XFRM_STATE_ESN)) {
 		sa_entry->esn_state.trigger = 0;
@@ -116,11 +115,9 @@ static bool mlx5e_ipsec_update_esn_state(struct mlx5e_ipsec_sa_entry *sa_entry)
 
 	sa_entry->esn_state.esn = xfrm_replay_seqhi(sa_entry->x,
 						    htonl(seq_bottom));
-	esn = &sa_entry->esn_state.esn;
 
 	sa_entry->esn_state.trigger = 1;
 	if (unlikely(overlap && seq_bottom < MLX5E_IPSEC_ESN_SCOPE_MID)) {
-		++(*esn);
 		sa_entry->esn_state.overlap = 0;
 		return true;
 	} else if (unlikely(!overlap &&
-- 
2.37.3

Re: [V4 net 01/15] net/mlx5e: Do not increment ESN when updating IPsec ESN state

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net.git (master)
by Jakub Kicinski <kuba@kernel.org>:

On Wed, 26 Oct 2022 14:51:39 +0100 you wrote:
> From: Hyong Youb Kim <hyonkim@cisco.com>
> 
> An offloaded SA stops receiving after about 2^32 + replay_window
> packets. For example, when SA reaches <seq-hi 0x1, seq 0x2c>, all
> subsequent packets get dropped with SA-icv-failure (integrity_failed).
> 
> To reproduce the bug:
> - ConnectX-6 Dx with crypto enabled (FW 22.30.1004)
> - ipsec.conf:
>   nic-offload = yes
>   replay-window = 32
>   esn = yes
>   salifetime=24h
> - Run netperf for a long time to send more than 2^32 packets
>   netperf -H <device-under-test> -t TCP_STREAM -l 20000
> 
> [...]

Here is the summary with links:
  - [V4,net,01/15] net/mlx5e: Do not increment ESN when updating IPsec ESN state
    https://git.kernel.org/netdev/net/c/888be6b279b7
  - [V4,net,02/15] net/mlx5: Wait for firmware to enable CRS before pci_restore_state
    https://git.kernel.org/netdev/net/c/212b4d7251c1
  - [V4,net,03/15] net/mlx5: DR, Fix matcher disconnect error flow
    https://git.kernel.org/netdev/net/c/4ea9891d6641
  - [V4,net,04/15] net/mlx5e: Extend SKB room check to include PTP-SQ
    https://git.kernel.org/netdev/net/c/19b43a432e3e
  - [V4,net,05/15] net/mlx5e: Update restore chain id for slow path packets
    https://git.kernel.org/netdev/net/c/8dc47c0527c1
  - [V4,net,06/15] net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
    https://git.kernel.org/netdev/net/c/0f3caaa2c6fb
  - [V4,net,07/15] net/mlx5: Fix possible use-after-free in async command interface
    https://git.kernel.org/netdev/net/c/bacd22df9514
  - [V4,net,08/15] net/mlx5e: TC, Reject forwarding from internal port to internal port
    https://git.kernel.org/netdev/net/c/f382a2413dae
  - [V4,net,09/15] net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
    https://git.kernel.org/netdev/net/c/94d651739e17
  - [V4,net,10/15] net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
    https://git.kernel.org/netdev/net/c/416ef7136319
  - [V4,net,11/15] net/mlx5: Fix crash during sync firmware reset
    https://git.kernel.org/netdev/net/c/aefb62a99887
  - [V4,net,12/15] net/mlx5e: Fix macsec coverity issue at rx sa update
    https://git.kernel.org/netdev/net/c/d3ecf037569c
  - [V4,net,13/15] net/mlx5e: Fix macsec rx security association (SA) update/delete
    https://git.kernel.org/netdev/net/c/74573e38e933
  - [V4,net,14/15] net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
    https://git.kernel.org/netdev/net/c/d550956458a8
  - [V4,net,15/15] net/mlx5e: Fix macsec sci endianness at rx sa update
    https://git.kernel.org/netdev/net/c/12ba40ba3dc3

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

[V4 net 02/15] net/mlx5: Wait for firmware to enable CRS before pci_restore_state

[Saeed Mahameed]

From: Moshe Shemesh <moshe@nvidia.com>

After firmware reset driver should verify firmware already enabled CRS
and became responsive to pci config cycles before restoring pci state.
Fix that by waiting till device_id is readable through PCI again.

Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../net/ethernet/mellanox/mlx5/core/fw_reset.c  | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
index e8896f368362..07c583996c29 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -358,6 +358,23 @@ static int mlx5_pci_link_toggle(struct mlx5_core_dev *dev)
 		err = -ETIMEDOUT;
 	}
 
+	do {
+		err = pci_read_config_word(dev->pdev, PCI_DEVICE_ID, &reg16);
+		if (err)
+			return err;
+		if (reg16 == dev_id)
+			break;
+		msleep(20);
+	} while (!time_after(jiffies, timeout));
+
+	if (reg16 == dev_id) {
+		mlx5_core_info(dev, "Firmware responds to PCI config cycles again\n");
+	} else {
+		mlx5_core_err(dev, "Firmware is not responsive (0x%04x) after %llu ms\n",
+			      reg16, mlx5_tout_ms(dev, PCI_TOGGLE));
+		err = -ETIMEDOUT;
+	}
+
 restore:
 	list_for_each_entry(sdev, &bridge_bus->devices, bus_list) {
 		pci_cfg_access_unlock(sdev);
-- 
2.37.3

[V4 net 03/15] net/mlx5: DR, Fix matcher disconnect error flow

[Saeed Mahameed]

From: Rongwei Liu <rongweil@nvidia.com>

When 2nd flow rules arrives, it will merge together with the
1st one if matcher criteria is the same.

If merge fails, driver will rollback the merge contents, and
reject the 2nd rule. At rollback stage, matcher can't be
disconnected unconditionally, otherise the 1st rule can't be
hit anymore.

Add logic to check if the matcher should be disconnected or not.

Fixes: cc2295cd54e4 ("net/mlx5: DR, Improve steering for empty or RX/TX-only matchers)
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c
index ddfaf7891188..91ff19f67695 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c
@@ -1200,7 +1200,8 @@ dr_rule_create_rule_nic(struct mlx5dr_rule *rule,
 	}
 
 remove_from_nic_tbl:
-	mlx5dr_matcher_remove_from_tbl_nic(dmn, nic_matcher);
+	if (!nic_matcher->rules)
+		mlx5dr_matcher_remove_from_tbl_nic(dmn, nic_matcher);
 
 free_hw_ste:
 	mlx5dr_domain_nic_unlock(nic_dmn);
-- 
2.37.3

Re: [V4 net 03/15] net/mlx5: DR, Fix matcher disconnect error flow

[Jakub Kicinski]

On Wed, 26 Oct 2022 14:51:41 +0100 Saeed Mahameed wrote:
> Fixes: cc2295cd54e4 ("net/mlx5: DR, Improve steering for empty or RX/TX-only matchers)

This is missing the terminating quotation marks.

Let me apply the series from the list and fix this for you. Sigh.

[V4 net 04/15] net/mlx5e: Extend SKB room check to include PTP-SQ

[Saeed Mahameed]

From: Aya Levin <ayal@nvidia.com>

When tx_port_ts is set, the driver diverts all UPD traffic over PTP port
to a dedicated PTP-SQ. The SKBs are cached until the wire-CQE arrives.
When the packet size is greater then MTU, the firmware might drop it and
the packet won't be transmitted to the wire, hence the wire-CQE won't
reach the driver. In this case the SKBs are accumulated in the SKB fifo.
Add room check to consider the PTP-SQ SKB fifo, when the SKB fifo is
full, driver stops the queue resulting in a TX timeout. Devlink
TX-reporter can recover from it.

Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h  | 9 +++++++++
 drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h | 6 ++++++
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c   | 6 ++++++
 3 files changed, 21 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h
index 5bce554e131a..cc7efde88ac3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h
@@ -6,6 +6,7 @@
 
 #include "en.h"
 #include "en_stats.h"
+#include "en/txrx.h"
 #include <linux/ptp_classify.h>
 
 #define MLX5E_PTP_CHANNEL_IX 0
@@ -68,6 +69,14 @@ static inline bool mlx5e_use_ptpsq(struct sk_buff *skb)
 		fk.ports.dst == htons(PTP_EV_PORT));
 }
 
+static inline bool mlx5e_ptpsq_fifo_has_room(struct mlx5e_txqsq *sq)
+{
+	if (!sq->ptpsq)
+		return true;
+
+	return mlx5e_skb_fifo_has_room(&sq->ptpsq->skb_fifo);
+}
+
 int mlx5e_ptp_open(struct mlx5e_priv *priv, struct mlx5e_params *params,
 		   u8 lag_port, struct mlx5e_ptp **cp);
 void mlx5e_ptp_close(struct mlx5e_ptp *c);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
index 4456ad5cedf1..cb164b62f543 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
@@ -57,6 +57,12 @@ netdev_tx_t mlx5e_xmit(struct sk_buff *skb, struct net_device *dev);
 bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget);
 void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq);
 
+static inline bool
+mlx5e_skb_fifo_has_room(struct mlx5e_skb_fifo *fifo)
+{
+	return (*fifo->pc - *fifo->cc) < fifo->mask;
+}
+
 static inline bool
 mlx5e_wqc_has_room_for(struct mlx5_wq_cyc *wq, u16 cc, u16 pc, u16 n)
 {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index bf2232a2a836..6adca01fbdc9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -392,6 +392,11 @@ mlx5e_txwqe_complete(struct mlx5e_txqsq *sq, struct sk_buff *skb,
 	if (unlikely(sq->ptpsq)) {
 		mlx5e_skb_cb_hwtstamp_init(skb);
 		mlx5e_skb_fifo_push(&sq->ptpsq->skb_fifo, skb);
+		if (!netif_tx_queue_stopped(sq->txq) &&
+		    !mlx5e_skb_fifo_has_room(&sq->ptpsq->skb_fifo)) {
+			netif_tx_stop_queue(sq->txq);
+			sq->stats->stopped++;
+		}
 		skb_get(skb);
 	}
 
@@ -868,6 +873,7 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget)
 
 	if (netif_tx_queue_stopped(sq->txq) &&
 	    mlx5e_wqc_has_room_for(&sq->wq, sq->cc, sq->pc, sq->stop_room) &&
+	    mlx5e_ptpsq_fifo_has_room(sq) &&
 	    !test_bit(MLX5E_SQ_STATE_RECOVERING, &sq->state)) {
 		netif_tx_wake_queue(sq->txq);
 		stats->wake++;
-- 
2.37.3

[V4 net 05/15] net/mlx5e: Update restore chain id for slow path packets

[Saeed Mahameed]

From: Paul Blakey <paulb@nvidia.com>

Currently encap slow path rules just forward to software without
setting the chain id miss register, so driver doesn't restore
the chain, and packets hitting this rule will restart from tc chain
0 instead of continuing to the chain the encap rule was on.

Fix this by setting the chain id miss register to the chain id mapping.

Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../ethernet/mellanox/mlx5/core/en/tc_priv.h  |  2 +
 .../net/ethernet/mellanox/mlx5/core/en_tc.c   | 62 ++++++++++++++++++-
 2 files changed, 62 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h
index 10c9a8a79d00..2e42d7c5451e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h
@@ -96,6 +96,7 @@ struct mlx5e_tc_flow {
 	struct encap_flow_item encaps[MLX5_MAX_FLOW_FWD_VPORTS];
 	struct mlx5e_tc_flow *peer_flow;
 	struct mlx5e_mod_hdr_handle *mh; /* attached mod header instance */
+	struct mlx5e_mod_hdr_handle *slow_mh; /* attached mod header instance for slow path */
 	struct mlx5e_hairpin_entry *hpe; /* attached hairpin instance */
 	struct list_head hairpin; /* flows sharing the same hairpin */
 	struct list_head peer;    /* flows with peer flow */
@@ -111,6 +112,7 @@ struct mlx5e_tc_flow {
 	struct completion del_hw_done;
 	struct mlx5_flow_attr *attr;
 	struct list_head attrs;
+	u32 chain_mapping;
 };
 
 struct mlx5_flow_handle *
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 70a7a61f9708..2cceace36c77 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -1405,8 +1405,13 @@ mlx5e_tc_offload_to_slow_path(struct mlx5_eswitch *esw,
 			      struct mlx5e_tc_flow *flow,
 			      struct mlx5_flow_spec *spec)
 {
+	struct mlx5e_tc_mod_hdr_acts mod_acts = {};
+	struct mlx5e_mod_hdr_handle *mh = NULL;
 	struct mlx5_flow_attr *slow_attr;
 	struct mlx5_flow_handle *rule;
+	bool fwd_and_modify_cap;
+	u32 chain_mapping = 0;
+	int err;
 
 	slow_attr = mlx5_alloc_flow_attr(MLX5_FLOW_NAMESPACE_FDB);
 	if (!slow_attr)
@@ -1417,13 +1422,56 @@ mlx5e_tc_offload_to_slow_path(struct mlx5_eswitch *esw,
 	slow_attr->esw_attr->split_count = 0;
 	slow_attr->flags |= MLX5_ATTR_FLAG_SLOW_PATH;
 
+	fwd_and_modify_cap = MLX5_CAP_ESW_FLOWTABLE((esw)->dev, fdb_modify_header_fwd_to_table);
+	if (!fwd_and_modify_cap)
+		goto skip_restore;
+
+	err = mlx5_chains_get_chain_mapping(esw_chains(esw), flow->attr->chain, &chain_mapping);
+	if (err)
+		goto err_get_chain;
+
+	err = mlx5e_tc_match_to_reg_set(esw->dev, &mod_acts, MLX5_FLOW_NAMESPACE_FDB,
+					CHAIN_TO_REG, chain_mapping);
+	if (err)
+		goto err_reg_set;
+
+	mh = mlx5e_mod_hdr_attach(esw->dev, get_mod_hdr_table(flow->priv, flow),
+				  MLX5_FLOW_NAMESPACE_FDB, &mod_acts);
+	if (IS_ERR(mh)) {
+		err = PTR_ERR(mh);
+		goto err_attach;
+	}
+
+	slow_attr->action |= MLX5_FLOW_CONTEXT_ACTION_MOD_HDR;
+	slow_attr->modify_hdr = mlx5e_mod_hdr_get(mh);
+
+skip_restore:
 	rule = mlx5e_tc_offload_fdb_rules(esw, flow, spec, slow_attr);
-	if (!IS_ERR(rule))
-		flow_flag_set(flow, SLOW);
+	if (IS_ERR(rule)) {
+		err = PTR_ERR(rule);
+		goto err_offload;
+	}
 
+	flow->slow_mh = mh;
+	flow->chain_mapping = chain_mapping;
+	flow_flag_set(flow, SLOW);
+
+	mlx5e_mod_hdr_dealloc(&mod_acts);
 	kfree(slow_attr);
 
 	return rule;
+
+err_offload:
+	if (fwd_and_modify_cap)
+		mlx5e_mod_hdr_detach(esw->dev, get_mod_hdr_table(flow->priv, flow), mh);
+err_attach:
+err_reg_set:
+	if (fwd_and_modify_cap)
+		mlx5_chains_put_chain_mapping(esw_chains(esw), chain_mapping);
+err_get_chain:
+	mlx5e_mod_hdr_dealloc(&mod_acts);
+	kfree(slow_attr);
+	return ERR_PTR(err);
 }
 
 void mlx5e_tc_unoffload_from_slow_path(struct mlx5_eswitch *esw,
@@ -1441,7 +1489,17 @@ void mlx5e_tc_unoffload_from_slow_path(struct mlx5_eswitch *esw,
 	slow_attr->action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
 	slow_attr->esw_attr->split_count = 0;
 	slow_attr->flags |= MLX5_ATTR_FLAG_SLOW_PATH;
+	if (flow->slow_mh) {
+		slow_attr->action |= MLX5_FLOW_CONTEXT_ACTION_MOD_HDR;
+		slow_attr->modify_hdr = mlx5e_mod_hdr_get(flow->slow_mh);
+	}
 	mlx5e_tc_unoffload_fdb_rules(esw, flow, slow_attr);
+	if (flow->slow_mh) {
+		mlx5e_mod_hdr_detach(esw->dev, get_mod_hdr_table(flow->priv, flow), flow->slow_mh);
+		mlx5_chains_put_chain_mapping(esw_chains(esw), flow->chain_mapping);
+		flow->chain_mapping = 0;
+		flow->slow_mh = NULL;
+	}
 	flow_flag_clear(flow, SLOW);
 	kfree(slow_attr);
 }
-- 
2.37.3

[V4 net 06/15] net/mlx5: ASO, Create the ASO SQ with the correct timestamp format

[Saeed Mahameed]

From: Saeed Mahameed <saeedm@nvidia.com>

mlx5 SQs must select the timestamp format explicitly according to the
active clock mode, select the current active timestamp mode so ASO SQ create
will succeed.

This fixes the following error prints when trying to create ipsec ASO SQ
while the timestamp format is real time mode.

mlx5_cmd_out_err:778:(pid 34874): CREATE_SQ(0x904) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xd61c0b), err(-22)
mlx5_aso_create_sq:285:(pid 34874): Failed to open aso wq sq, err=-22
mlx5e_ipsec_init:436:(pid 34874): IPSec initialization failed, -22

Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c
index baa8092f335e..c971ff04dd04 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/aso.c
@@ -3,6 +3,7 @@
 
 #include <linux/mlx5/device.h>
 #include <linux/mlx5/transobj.h>
+#include "clock.h"
 #include "aso.h"
 #include "wq.h"
 
@@ -179,6 +180,7 @@ static int create_aso_sq(struct mlx5_core_dev *mdev, int pdn,
 {
 	void *in, *sqc, *wq;
 	int inlen, err;
+	u8 ts_format;
 
 	inlen = MLX5_ST_SZ_BYTES(create_sq_in) +
 		sizeof(u64) * sq->wq_ctrl.buf.npages;
@@ -195,6 +197,11 @@ static int create_aso_sq(struct mlx5_core_dev *mdev, int pdn,
 	MLX5_SET(sqc,  sqc, state, MLX5_SQC_STATE_RST);
 	MLX5_SET(sqc,  sqc, flush_in_error_en, 1);
 
+	ts_format = mlx5_is_real_time_sq(mdev) ?
+			MLX5_TIMESTAMP_FORMAT_REAL_TIME :
+			MLX5_TIMESTAMP_FORMAT_FREE_RUNNING;
+	MLX5_SET(sqc, sqc, ts_format, ts_format);
+
 	MLX5_SET(wq,   wq, wq_type,       MLX5_WQ_TYPE_CYCLIC);
 	MLX5_SET(wq,   wq, uar_page,      mdev->mlx5e_res.hw_objs.bfreg.index);
 	MLX5_SET(wq,   wq, log_wq_pg_sz,  sq->wq_ctrl.buf.page_shift -
-- 
2.37.3

[V4 net 07/15] net/mlx5: Fix possible use-after-free in async command interface

[Saeed Mahameed]

From: Tariq Toukan <tariqt@nvidia.com>

mlx5_cmd_cleanup_async_ctx should return only after all its callback
handlers were completed. Before this patch, the below race between
mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and
lead to a use-after-free:

1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e.
   elevated by 1, a single inflight callback).
2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1.
3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and
   is about to call wake_up().
4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns
   immediately as the condition (num_inflight == 0) holds.
5. mlx5_cmd_cleanup_async_ctx returns.
6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx
   object.
7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed
   object.

Fix it by syncing using a completion object. Mark it completed when
num_inflight reaches 0.

Trace:

BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270
Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0

CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 dump_stack_lvl+0x57/0x7d
 print_report.cold+0x2d5/0x684
 ? do_raw_spin_lock+0x23d/0x270
 kasan_report+0xb1/0x1a0
 ? do_raw_spin_lock+0x23d/0x270
 do_raw_spin_lock+0x23d/0x270
 ? rwlock_bug.part.0+0x90/0x90
 ? __delete_object+0xb8/0x100
 ? lock_downgrade+0x6e0/0x6e0
 _raw_spin_lock_irqsave+0x43/0x60
 ? __wake_up_common_lock+0xb9/0x140
 __wake_up_common_lock+0xb9/0x140
 ? __wake_up_common+0x650/0x650
 ? destroy_tis_callback+0x53/0x70 [mlx5_core]
 ? kasan_set_track+0x21/0x30
 ? destroy_tis_callback+0x53/0x70 [mlx5_core]
 ? kfree+0x1ba/0x520
 ? do_raw_spin_unlock+0x54/0x220
 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core]
 ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core]
 ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core]
 mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core]
 ? dump_command+0xcc0/0xcc0 [mlx5_core]
 ? lockdep_hardirqs_on_prepare+0x400/0x400
 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core]
 cmd_comp_notifier+0x7e/0xb0 [mlx5_core]
 atomic_notifier_call_chain+0xd7/0x1d0
 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core]
 atomic_notifier_call_chain+0xd7/0x1d0
 ? irq_release+0x140/0x140 [mlx5_core]
 irq_int_handler+0x19/0x30 [mlx5_core]
 __handle_irq_event_percpu+0x1f2/0x620
 handle_irq_event+0xb2/0x1d0
 handle_edge_irq+0x21e/0xb00
 __common_interrupt+0x79/0x1a0
 common_interrupt+0x78/0xa0
 </IRQ>
 <TASK>
 asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0x42/0x60
Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00
RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242
RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110
RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc
RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3
R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005
R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000
 ? default_idle_call+0xcc/0x450
 default_idle_call+0xec/0x450
 do_idle+0x394/0x450
 ? arch_cpu_idle_exit+0x40/0x40
 ? do_idle+0x17/0x450
 cpu_startup_entry+0x19/0x20
 start_secondary+0x221/0x2b0
 ? set_cpu_sibling_map+0x2070/0x2070
 secondary_startup_64_no_verify+0xcd/0xdb
 </TASK>

Allocated by task 49502:
 kasan_save_stack+0x1e/0x40
 __kasan_kmalloc+0x81/0xa0
 kvmalloc_node+0x48/0xe0
 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core]
 mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core]
 mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core]
 mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core]
 mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
 mlx5e_suspend+0xdb/0x140 [mlx5_core]
 mlx5e_remove+0x89/0x190 [mlx5_core]
 auxiliary_bus_remove+0x52/0x70
 device_release_driver_internal+0x40f/0x650
 driver_detach+0xc1/0x180
 bus_remove_driver+0x125/0x2f0
 auxiliary_driver_unregister+0x16/0x50
 mlx5e_cleanup+0x26/0x30 [mlx5_core]
 cleanup+0xc/0x4e [mlx5_core]
 __x64_sys_delete_module+0x2b5/0x450
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 49502:
 kasan_save_stack+0x1e/0x40
 kasan_set_track+0x21/0x30
 kasan_set_free_info+0x20/0x30
 ____kasan_slab_free+0x11d/0x1b0
 kfree+0x1ba/0x520
 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core]
 mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core]
 mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core]
 mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
 mlx5e_suspend+0xdb/0x140 [mlx5_core]
 mlx5e_remove+0x89/0x190 [mlx5_core]
 auxiliary_bus_remove+0x52/0x70
 device_release_driver_internal+0x40f/0x650
 driver_detach+0xc1/0x180
 bus_remove_driver+0x125/0x2f0
 auxiliary_driver_unregister+0x16/0x50
 mlx5e_cleanup+0x26/0x30 [mlx5_core]
 cleanup+0xc/0x4e [mlx5_core]
 __x64_sys_delete_module+0x2b5/0x450
 do_syscall_64+0x3d/0x90
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: e355477ed9e4 ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 10 +++++-----
 include/linux/mlx5/driver.h                   |  2 +-
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index 0377392848d9..46ba4c2faad2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -2004,7 +2004,7 @@ void mlx5_cmd_init_async_ctx(struct mlx5_core_dev *dev,
 	ctx->dev = dev;
 	/* Starts at 1 to avoid doing wake_up if we are not cleaning up */
 	atomic_set(&ctx->num_inflight, 1);
-	init_waitqueue_head(&ctx->wait);
+	init_completion(&ctx->inflight_done);
 }
 EXPORT_SYMBOL(mlx5_cmd_init_async_ctx);
 
@@ -2018,8 +2018,8 @@ EXPORT_SYMBOL(mlx5_cmd_init_async_ctx);
  */
 void mlx5_cmd_cleanup_async_ctx(struct mlx5_async_ctx *ctx)
 {
-	atomic_dec(&ctx->num_inflight);
-	wait_event(ctx->wait, atomic_read(&ctx->num_inflight) == 0);
+	if (!atomic_dec_and_test(&ctx->num_inflight))
+		wait_for_completion(&ctx->inflight_done);
 }
 EXPORT_SYMBOL(mlx5_cmd_cleanup_async_ctx);
 
@@ -2032,7 +2032,7 @@ static void mlx5_cmd_exec_cb_handler(int status, void *_work)
 	status = cmd_status_err(ctx->dev, status, work->opcode, work->out);
 	work->user_callback(status, work);
 	if (atomic_dec_and_test(&ctx->num_inflight))
-		wake_up(&ctx->wait);
+		complete(&ctx->inflight_done);
 }
 
 int mlx5_cmd_exec_cb(struct mlx5_async_ctx *ctx, void *in, int in_size,
@@ -2050,7 +2050,7 @@ int mlx5_cmd_exec_cb(struct mlx5_async_ctx *ctx, void *in, int in_size,
 	ret = cmd_exec(ctx->dev, in, in_size, out, out_size,
 		       mlx5_cmd_exec_cb_handler, work, false);
 	if (ret && atomic_dec_and_test(&ctx->num_inflight))
-		wake_up(&ctx->wait);
+		complete(&ctx->inflight_done);
 
 	return ret;
 }
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index a12929bc31b2..af2ceb4160bc 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -970,7 +970,7 @@ void mlx5_cmd_allowed_opcode(struct mlx5_core_dev *dev, u16 opcode);
 struct mlx5_async_ctx {
 	struct mlx5_core_dev *dev;
 	atomic_t num_inflight;
-	struct wait_queue_head wait;
+	struct completion inflight_done;
 };
 
 struct mlx5_async_work;
-- 
2.37.3

[V4 net 08/15] net/mlx5e: TC, Reject forwarding from internal port to internal port

[Saeed Mahameed]

From: Ariel Levkovich <lariel@nvidia.com>

Reject TC rules that forward from internal port to internal port
as it is not supported.

This include rules that are explicitly have internal port as
the filter device as well as rules that apply on tunnel interfaces
as the route device for the tunnel interface can be an internal
port.

Fixes: 27484f7170ed ("net/mlx5e: Offload tc rules that redirect to ovs internal port")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 2cceace36c77..73f91e54e9d0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -4066,6 +4066,7 @@ parse_tc_fdb_actions(struct mlx5e_priv *priv,
 	struct mlx5e_tc_flow_parse_attr *parse_attr;
 	struct mlx5_flow_attr *attr = flow->attr;
 	struct mlx5_esw_flow_attr *esw_attr;
+	struct net_device *filter_dev;
 	int err;
 
 	err = flow_action_supported(flow_action, extack);
@@ -4074,6 +4075,7 @@ parse_tc_fdb_actions(struct mlx5e_priv *priv,
 
 	esw_attr = attr->esw_attr;
 	parse_attr = attr->parse_attr;
+	filter_dev = parse_attr->filter_dev;
 	parse_state = &parse_attr->parse_state;
 	mlx5e_tc_act_init_parse_state(parse_state, flow, flow_action, extack);
 	parse_state->ct_priv = get_ct_priv(priv);
@@ -4083,13 +4085,21 @@ parse_tc_fdb_actions(struct mlx5e_priv *priv,
 		return err;
 
 	/* Forward to/from internal port can only have 1 dest */
-	if ((netif_is_ovs_master(parse_attr->filter_dev) || esw_attr->dest_int_port) &&
+	if ((netif_is_ovs_master(filter_dev) || esw_attr->dest_int_port) &&
 	    esw_attr->out_count > 1) {
 		NL_SET_ERR_MSG_MOD(extack,
 				   "Rules with internal port can have only one destination");
 		return -EOPNOTSUPP;
 	}
 
+	/* Forward from tunnel/internal port to internal port is not supported */
+	if ((mlx5e_get_tc_tun(filter_dev) || netif_is_ovs_master(filter_dev)) &&
+	    esw_attr->dest_int_port) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Forwarding from tunnel/internal port to internal port is not supported");
+		return -EOPNOTSUPP;
+	}
+
 	err = actions_prepare_mod_hdr_actions(priv, flow, attr, extack);
 	if (err)
 		return err;
-- 
2.37.3

[V4 net 09/15] net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed

[Saeed Mahameed]

From: Roi Dayan <roid@nvidia.com>

On multi table split the driver creates a new attr instance with
data being copied from prev attr instance zeroing action flags.
Also need to reset dests properties to avoid incorrect dests per attr.

Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 73f91e54e9d0..dd6fea9e9a5b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -3633,6 +3633,10 @@ mlx5e_clone_flow_attr_for_post_act(struct mlx5_flow_attr *attr,
 	attr2->action = 0;
 	attr2->flags = 0;
 	attr2->parse_attr = parse_attr;
+	attr2->esw_attr->out_count = 0;
+	attr2->esw_attr->split_count = 0;
+	attr2->dest_chain = 0;
+	attr2->dest_ft = NULL;
 	return attr2;
 }
 
-- 
2.37.3

[V4 net 10/15] net/mlx5: Update fw fatal reporter state on PCI handlers successful recover

[Saeed Mahameed]

From: Roy Novich <royno@nvidia.com>

Update devlink health fw fatal reporter state to "healthy" is needed by
strictly calling devlink_health_reporter_state_update() after recovery
was done by PCI error handler. This is needed when fw_fatal reporter was
triggered due to PCI error. Poll health is called and set reporter state
to error. Health recovery failed (since EEH didn't re-enable the PCI).
PCI handlers keep on recover flow and succeed later without devlink
acknowledgment. Fix this by adding devlink state update at the end of
the PCI handler recovery process.

Fixes: 6181e5cb752e ("devlink: add support for reporter recovery completion")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 0b459d841c3a..283c4cc28944 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1872,6 +1872,10 @@ static void mlx5_pci_resume(struct pci_dev *pdev)
 
 	err = mlx5_load_one(dev, false);
 
+	if (!err)
+		devlink_health_reporter_state_update(dev->priv.health.fw_fatal_reporter,
+						     DEVLINK_HEALTH_REPORTER_STATE_HEALTHY);
+
 	mlx5_pci_trace(dev, "Done, err = %d, device %s\n", err,
 		       !err ? "recovered" : "Failed");
 }
-- 
2.37.3

[V4 net 11/15] net/mlx5: Fix crash during sync firmware reset

[Saeed Mahameed]

From: Suresh Devarakonda <ramad@nvidia.com>

When setting Bluefield to DPU NIC mode using mlxconfig tool +  sync
firmware reset flow, we run into scenario where the host was not
eswitch manager at the time of mlx5 driver load but becomes eswitch manager
after the sync firmware reset flow. This results in null pointer
access of mpfs structure during mac filter add. This change prevents null
pointer access but mpfs table entries will not be added.

Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Suresh Devarakonda <ramad@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
index 839a01da110f..8ff16318e32d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/mpfs.c
@@ -122,7 +122,7 @@ void mlx5_mpfs_cleanup(struct mlx5_core_dev *dev)
 {
 	struct mlx5_mpfs *mpfs = dev->priv.mpfs;
 
-	if (!MLX5_ESWITCH_MANAGER(dev))
+	if (!mpfs)
 		return;
 
 	WARN_ON(!hlist_empty(mpfs->hash));
@@ -137,7 +137,7 @@ int mlx5_mpfs_add_mac(struct mlx5_core_dev *dev, u8 *mac)
 	int err = 0;
 	u32 index;
 
-	if (!MLX5_ESWITCH_MANAGER(dev))
+	if (!mpfs)
 		return 0;
 
 	mutex_lock(&mpfs->lock);
@@ -185,7 +185,7 @@ int mlx5_mpfs_del_mac(struct mlx5_core_dev *dev, u8 *mac)
 	int err = 0;
 	u32 index;
 
-	if (!MLX5_ESWITCH_MANAGER(dev))
+	if (!mpfs)
 		return 0;
 
 	mutex_lock(&mpfs->lock);
-- 
2.37.3

[V4 net 12/15] net/mlx5e: Fix macsec coverity issue at rx sa update

[Saeed Mahameed]

From: Raed Salem <raeds@nvidia.com>

The cited commit at update rx sa operation passes object attributes
to MACsec object create function without initializing/setting all
attributes fields leaving some of them with garbage values, therefore
violating the implicit assumption at create object function, which
assumes that all input object attributes fields are set.

Fix by initializing the object attributes struct to zero, thus leaving
unset fields with the legal zero value.

Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
index 4331235b21ee..250c878ba2c9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
@@ -432,7 +432,7 @@ static int mlx5e_macsec_update_rx_sa(struct mlx5e_macsec *macsec,
 				     bool active)
 {
 	struct mlx5_core_dev *mdev = macsec->mdev;
-	struct mlx5_macsec_obj_attrs attrs;
+	struct mlx5_macsec_obj_attrs attrs = {};
 	int err = 0;
 
 	if (rx_sa->active != active)
-- 
2.37.3

[V4 net 13/15] net/mlx5e: Fix macsec rx security association (SA) update/delete

[Saeed Mahameed]

From: Raed Salem <raeds@nvidia.com>

The cited commit adds the support for update/delete MACsec Rx SA,
naturally, these operations need to check if the SA in question exists
to update/delete the SA and return error code otherwise, however they
do just the opposite i.e. return with error if the SA exists

Fix by change the check to return error in case the SA in question does
not exist, adjust error message and code accordingly.

Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../ethernet/mellanox/mlx5/core/en_accel/macsec.c    | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
index 250c878ba2c9..6ae9fcdbda07 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
@@ -999,11 +999,11 @@ static int mlx5e_macsec_upd_rxsa(struct macsec_context *ctx)
 	}
 
 	rx_sa = rx_sc->rx_sa[assoc_num];
-	if (rx_sa) {
+	if (!rx_sa) {
 		netdev_err(ctx->netdev,
-			   "MACsec offload rx_sc sci %lld rx_sa %d already exist\n",
+			   "MACsec offload rx_sc sci %lld rx_sa %d doesn't exist\n",
 			   sci, assoc_num);
-		err = -EEXIST;
+		err = -EINVAL;
 		goto out;
 	}
 
@@ -1055,11 +1055,11 @@ static int mlx5e_macsec_del_rxsa(struct macsec_context *ctx)
 	}
 
 	rx_sa = rx_sc->rx_sa[assoc_num];
-	if (rx_sa) {
+	if (!rx_sa) {
 		netdev_err(ctx->netdev,
-			   "MACsec offload rx_sc sci %lld rx_sa %d already exist\n",
+			   "MACsec offload rx_sc sci %lld rx_sa %d doesn't exist\n",
 			   sci, assoc_num);
-		err = -EEXIST;
+		err = -EINVAL;
 		goto out;
 	}
 
-- 
2.37.3

[V4 net 14/15] net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function

[Saeed Mahameed]

From: Raed Salem <raeds@nvidia.com>

The cited commit produces a sparse check error of type
"sparse: error: restricted __be64 degrades to integer". The
offending line wrongly did a bitwise operation between two different
storage types one of 64 bit when the other smaller side is 16 bit
which caused the above sparse error, furthermore bitwise operation
usage here is wrong in the first place as the constant MACSEC_PORT_ES
is not a bitwise field.

Fix by using the right mask to get the lower 16 bit if the sci number,
and use comparison operator '==' instead of bitwise '&' operator.

Fixes: 3b20949cb21b ("net/mlx5e: Add MACsec RX steering rules")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c
index 13dc628b988a..1ac0cf04e811 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c
@@ -1180,7 +1180,7 @@ macsec_fs_rx_add_rule(struct mlx5e_macsec_fs *macsec_fs,
 	rx_rule->rule[0] = rule;
 
 	/* Rx crypto table without SCI rule */
-	if (cpu_to_be64((__force u64)attrs->sci) & ntohs(MACSEC_PORT_ES)) {
+	if ((cpu_to_be64((__force u64)attrs->sci) & 0xFFFF) == ntohs(MACSEC_PORT_ES)) {
 		memset(spec, 0, sizeof(struct mlx5_flow_spec));
 		memset(&dest, 0, sizeof(struct mlx5_flow_destination));
 		memset(&flow_act, 0, sizeof(flow_act));
-- 
2.37.3

[V4 net 15/15] net/mlx5e: Fix macsec sci endianness at rx sa update

[Saeed Mahameed]

From: Raed Salem <raeds@nvidia.com>

The cited commit at rx sa update operation passes the sci object
attribute, in the wrong endianness and not as expected by the HW
effectively create malformed hw sa context in case of update rx sa
consequently, HW produces unexpected MACsec packets which uses this
sa.

Fix by passing sci to create macsec object with the correct endianness,
while at it add __force u64 to prevent sparse check error of type
"sparse: error: incorrect type in assignment".

Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
index 6ae9fcdbda07..2ef36cb9555a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c
@@ -444,7 +444,7 @@ static int mlx5e_macsec_update_rx_sa(struct mlx5e_macsec *macsec,
 		return 0;
 	}
 
-	attrs.sci = rx_sa->sci;
+	attrs.sci = cpu_to_be64((__force u64)rx_sa->sci);
 	attrs.enc_key_id = rx_sa->enc_key_id;
 	err = mlx5e_macsec_create_object(mdev, &attrs, false, &rx_sa->macsec_obj_id);
 	if (err)
-- 
2.37.3