From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>,
netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>,
Maxim Mikityanskiy <maximmi@nvidia.com>
Subject: [V2 net 06/11] net/mlx5e: Add missing sanity checks for max TX WQE size
Date: Sat, 5 Nov 2022 00:10:23 -0700 [thread overview]
Message-ID: <20221105071028.578594-7-saeed@kernel.org> (raw)
In-Reply-To: <20221105071028.578594-1-saeed@kernel.org>
From: Maxim Mikityanskiy <maximmi@nvidia.com>
The commit cited below started using the firmware capability for the
maximum TX WQE size. This commit adds an important check to verify that
the driver doesn't attempt to exceed this capability, and also restores
another check mistakenly removed in the cited commit (a WQE must not
exceed the page size).
Fixes: c27bd1718c06 ("net/mlx5e: Read max WQEBBs on the SQ from firmware")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../net/ethernet/mellanox/mlx5/core/en/txrx.h | 24 ++++++++++++++++++-
.../net/ethernet/mellanox/mlx5/core/en_main.c | 7 ++++++
.../net/ethernet/mellanox/mlx5/core/en_tx.c | 5 ++++
3 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
index cb164b62f543..853f312cd757 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/txrx.h
@@ -11,6 +11,27 @@
#define INL_HDR_START_SZ (sizeof(((struct mlx5_wqe_eth_seg *)NULL)->inline_hdr.start))
+/* IPSEC inline data includes:
+ * 1. ESP trailer: up to 255 bytes of padding, 1 byte for pad length, 1 byte for
+ * next header.
+ * 2. ESP authentication data: 16 bytes for ICV.
+ */
+#define MLX5E_MAX_TX_IPSEC_DS DIV_ROUND_UP(sizeof(struct mlx5_wqe_inline_seg) + \
+ 255 + 1 + 1 + 16, MLX5_SEND_WQE_DS)
+
+/* 366 should be big enough to cover all L2, L3 and L4 headers with possible
+ * encapsulations.
+ */
+#define MLX5E_MAX_TX_INLINE_DS DIV_ROUND_UP(366 - INL_HDR_START_SZ + VLAN_HLEN, \
+ MLX5_SEND_WQE_DS)
+
+/* Sync the calculation with mlx5e_sq_calc_wqe_attr. */
+#define MLX5E_MAX_TX_WQEBBS DIV_ROUND_UP(MLX5E_TX_WQE_EMPTY_DS_COUNT + \
+ MLX5E_MAX_TX_INLINE_DS + \
+ MLX5E_MAX_TX_IPSEC_DS + \
+ MAX_SKB_FRAGS + 1, \
+ MLX5_SEND_WQEBB_NUM_DS)
+
#define MLX5E_RX_ERR_CQE(cqe) (get_cqe_opcode(cqe) != MLX5_CQE_RESP_SEND)
static inline
@@ -424,6 +445,8 @@ mlx5e_set_eseg_swp(struct sk_buff *skb, struct mlx5_wqe_eth_seg *eseg,
static inline u16 mlx5e_stop_room_for_wqe(struct mlx5_core_dev *mdev, u16 wqe_size)
{
+ WARN_ON_ONCE(PAGE_SIZE / MLX5_SEND_WQE_BB < mlx5e_get_max_sq_wqebbs(mdev));
+
/* A WQE must not cross the page boundary, hence two conditions:
* 1. Its size must not exceed the page size.
* 2. If the WQE size is X, and the space remaining in a page is less
@@ -436,7 +459,6 @@ static inline u16 mlx5e_stop_room_for_wqe(struct mlx5_core_dev *mdev, u16 wqe_si
"wqe_size %u is greater than max SQ WQEBBs %u",
wqe_size, mlx5e_get_max_sq_wqebbs(mdev));
-
return MLX5E_STOP_ROOM(wqe_size);
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 09296f1ae448..76861279fbda 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -5696,6 +5696,13 @@ int mlx5e_attach_netdev(struct mlx5e_priv *priv)
mlx5e_fs_set_state_destroy(priv->fs,
!test_bit(MLX5E_STATE_DESTROYING, &priv->state));
+ /* Validate the max_wqe_size_sq capability. */
+ if (WARN_ON_ONCE(mlx5e_get_max_sq_wqebbs(priv->mdev) < MLX5E_MAX_TX_WQEBBS)) {
+ mlx5_core_warn(priv->mdev, "MLX5E: Max SQ WQEBBs firmware capability: %u, needed %lu\n",
+ mlx5e_get_max_sq_wqebbs(priv->mdev), MLX5E_MAX_TX_WQEBBS);
+ return -EIO;
+ }
+
/* max number of channels may have changed */
max_nch = mlx5e_calc_max_nch(priv->mdev, priv->netdev, profile);
if (priv->channels.params.num_channels > max_nch) {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index 6adca01fbdc9..f7897ddb29c5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -305,6 +305,8 @@ static void mlx5e_sq_calc_wqe_attr(struct sk_buff *skb, const struct mlx5e_tx_at
u16 ds_cnt_inl = 0;
u16 ds_cnt_ids = 0;
+ /* Sync the calculation with MLX5E_MAX_TX_WQEBBS. */
+
if (attr->insz)
ds_cnt_ids = DIV_ROUND_UP(sizeof(struct mlx5_wqe_inline_seg) + attr->insz,
MLX5_SEND_WQE_DS);
@@ -317,6 +319,9 @@ static void mlx5e_sq_calc_wqe_attr(struct sk_buff *skb, const struct mlx5e_tx_at
inl += VLAN_HLEN;
ds_cnt_inl = DIV_ROUND_UP(inl, MLX5_SEND_WQE_DS);
+ if (WARN_ON_ONCE(ds_cnt_inl > MLX5E_MAX_TX_INLINE_DS))
+ netdev_warn(skb->dev, "ds_cnt_inl = %u > max %u\n", ds_cnt_inl,
+ (u16)MLX5E_MAX_TX_INLINE_DS);
ds_cnt += ds_cnt_inl;
}
--
2.38.1
next prev parent reply other threads:[~2022-11-05 7:10 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-05 7:10 [pull request][V2 net 00/11] mlx5 fixes 2022-11-02 Saeed Mahameed
2022-11-05 7:10 ` [V2 net 01/11] net/mlx5: Bridge, verify LAG state when adding bond to bridge Saeed Mahameed
2022-11-05 7:10 ` [V2 net 02/11] net/mlx5: Allow async trigger completion execution on single CPU systems Saeed Mahameed
2022-11-05 7:10 ` [V2 net 03/11] net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode Saeed Mahameed
2022-11-05 7:10 ` [V2 net 04/11] net/mlx5: fw_reset: Don't try to load device in case PCI isn't working Saeed Mahameed
2022-11-05 7:10 ` [V2 net 05/11] net/mlx5: Fix possible deadlock on mlx5e_tx_timeout_work Saeed Mahameed
2022-11-08 4:24 ` Jakub Kicinski
2022-11-08 10:19 ` Paolo Abeni
2022-11-08 18:02 ` Saeed Mahameed
2022-11-05 7:10 ` Saeed Mahameed [this message]
2022-11-05 7:10 ` [V2 net 07/11] net/mlx5e: Fix usage of DMA sync API Saeed Mahameed
2022-11-05 7:10 ` [V2 net 08/11] net/mlx5e: Fix tc acts array not to be dependent on enum order Saeed Mahameed
2022-11-05 7:10 ` [V2 net 09/11] net/mlx5e: TC, Fix wrong rejection of packet-per-second policing Saeed Mahameed
2022-11-05 7:10 ` [V2 net 10/11] net/mlx5e: E-Switch, Fix comparing termination table instance Saeed Mahameed
2022-11-05 7:10 ` [V2 net 11/11] net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221105071028.578594-7-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=maximmi@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).