From: Vladimir Oltean <olteanv@gmail.com>
To: Felix Fietkau <nbd@nbd.name>, Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org, "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v2 08/12] net: dsa: add support for DSA rx offloading via metadata dst
Date: Fri, 11 Nov 2022 14:06:13 +0200 [thread overview]
Message-ID: <20221111120613.ll5sywfeo25ub6ja@skbuf> (raw)
In-Reply-To: <20221109163426.76164-9-nbd@nbd.name>
On Wed, Nov 09, 2022 at 05:34:22PM +0100, Felix Fietkau wrote:
> If a metadata dst is present with the type METADATA_HW_PORT_MUX on a dsa cpu
> port netdev, assume that it carries the port number and that there is no DSA
> tag present in the skb data.
>
> Signed-off-by: Felix Fietkau <nbd@nbd.name>
> ---
> net/core/flow_dissector.c | 4 +++-
> net/dsa/dsa.c | 18 +++++++++++++++++-
> 2 files changed, 20 insertions(+), 2 deletions(-)
>
> diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
> index 25cd35f5922e..1f476abc25e1 100644
> --- a/net/core/flow_dissector.c
> +++ b/net/core/flow_dissector.c
> @@ -972,11 +972,13 @@ bool __skb_flow_dissect(const struct net *net,
> if (unlikely(skb->dev && netdev_uses_dsa(skb->dev) &&
> proto == htons(ETH_P_XDSA))) {
> const struct dsa_device_ops *ops;
> + struct metadata_dst *md_dst = skb_metadata_dst(skb);
> int offset = 0;
>
> ops = skb->dev->dsa_ptr->tag_ops;
> /* Only DSA header taggers break flow dissection */
> - if (ops->needed_headroom) {
> + if (ops->needed_headroom &&
> + (!md_dst || md_dst->type != METADATA_HW_PORT_MUX)) {
> if (ops->flow_dissect)
> ops->flow_dissect(skb, &proto, &offset);
> else
> diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
> index 64b14f655b23..a20440e82dec 100644
> --- a/net/dsa/dsa.c
> +++ b/net/dsa/dsa.c
> @@ -11,6 +11,7 @@
> #include <linux/netdevice.h>
> #include <linux/sysfs.h>
> #include <linux/ptp_classify.h>
> +#include <net/dst_metadata.h>
>
> #include "dsa_priv.h"
>
> @@ -216,6 +217,7 @@ static bool dsa_skb_defer_rx_timestamp(struct dsa_slave_priv *p,
> static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
> struct packet_type *pt, struct net_device *unused)
> {
> + struct metadata_dst *md_dst = skb_metadata_dst(skb);
> struct dsa_port *cpu_dp = dev->dsa_ptr;
> struct sk_buff *nskb = NULL;
> struct dsa_slave_priv *p;
> @@ -229,7 +231,21 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
> if (!skb)
> return 0;
>
> - nskb = cpu_dp->rcv(skb, dev);
> + if (md_dst && md_dst->type == METADATA_HW_PORT_MUX) {
> + unsigned int port = md_dst->u.port_info.port_id;
> +
> + dsa_default_offload_fwd_mark(skb);
> + skb_dst_set(skb, NULL);
> + if (!skb_has_extensions(skb))
> + skb->slow_gro = 0;
Paolo, does this look okay to you, hand rolled in DSA like that?
Do you see a way in which this would be done automatically once the
metadata dst pointer is unset?
> +
> + skb->dev = dsa_master_find_slave(dev, 0, port);
> + if (skb->dev)
> + nskb = skb;
> + } else {
> + nskb = cpu_dp->rcv(skb, dev);
> + }
> +
> if (!nskb) {
> kfree_skb(skb);
> return 0;
> --
> 2.38.1
>
next prev parent reply other threads:[~2022-11-11 12:07 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-09 16:34 [PATCH net-next v2 00/12] Multiqueue + DSA untag support + fixes for mtk_eth_soc Felix Fietkau
2022-11-09 16:34 ` [PATCH net-next v2 01/12] net: ethernet: mtk_eth_soc: account for vlan in rx header length Felix Fietkau
2022-11-10 14:31 ` Vladimir Oltean
2022-11-09 16:34 ` [PATCH net-next v2 02/12] net: ethernet: mtk_eth_soc: increase tx ring side for QDMA devices Felix Fietkau
2022-11-09 16:34 ` [PATCH net-next v2 03/12] net: ethernet: mtk_eth_soc: avoid port_mg assignment on MT7622 and newer Felix Fietkau
2022-11-09 16:34 ` [PATCH net-next v2 04/12] net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues Felix Fietkau
2022-11-09 16:34 ` [PATCH net-next v2 05/12] net: dsa: tag_mtk: assign " Felix Fietkau
2022-11-09 16:34 ` [PATCH net-next v2 06/12] net: ethernet: mediatek: ppe: assign per-port queues for offloaded traffic Felix Fietkau
2022-11-09 16:34 ` [PATCH net-next v2 07/12] net: ethernet: mtk_eth_soc: compile out netsys v2 code on mt7621 Felix Fietkau
2022-11-09 16:34 ` [PATCH net-next v2 08/12] net: dsa: add support for DSA rx offloading via metadata dst Felix Fietkau
2022-11-11 12:06 ` Vladimir Oltean [this message]
2022-11-09 16:34 ` [PATCH net-next v2 09/12] net: ethernet: mtk_eth_soc: fix VLAN rx hardware acceleration Felix Fietkau
2022-11-10 15:22 ` Vladimir Oltean
2022-11-10 18:42 ` Felix Fietkau
2022-11-09 16:34 ` [PATCH net-next v2 10/12] net: ethernet: mtk_eth_soc: work around issue with sending small fragments Felix Fietkau
2022-11-09 16:34 ` [PATCH net-next v2 11/12] net: ethernet: mtk_eth_soc: set NETIF_F_ALL_TSO Felix Fietkau
2022-11-11 2:09 ` Jakub Kicinski
2022-11-09 16:34 ` [PATCH net-next v2 12/12] net: ethernet: mtk_eth_soc: drop packets to WDMA if the ring is full Felix Fietkau
2022-11-10 14:28 ` [PATCH net-next v2 00/12] Multiqueue + DSA untag support + fixes for mtk_eth_soc Vladimir Oltean
2022-11-10 18:44 ` Felix Fietkau
2022-11-10 18:50 ` Russell King (Oracle)
2022-11-10 19:03 ` Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221111120613.ll5sywfeo25ub6ja@skbuf \
--to=olteanv@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nbd@nbd.name \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox