From: Jerry Ray <jerry.ray@microchip.com>
To: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Jerry Ray <jerry.ray@microchip.com>
Subject: [net-next][PATCH v2 2/2] dsa: lan9303: Add 2 ethtool stats
Date: Tue, 15 Nov 2022 10:51:31 -0600 [thread overview]
Message-ID: <20221115165131.11467-2-jerry.ray@microchip.com> (raw)
In-Reply-To: <20221115165131.11467-1-jerry.ray@microchip.com>
Adding RxDropped and TxDropped counters to the reported statistics.
As these stats are kept by the switch rather than the port instance,
they are indexed differently.
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
---
v1->v2:
Split patch into 2 pieces.
Removed the adding of a module number to the driver.
---
drivers/net/dsa/lan9303-core.c | 38 ++++++++++++++++++++++++++++------
1 file changed, 32 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 80f07bd20593..714a21d7aa0a 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -177,10 +177,12 @@
#define LAN9303_SWE_INGRESS_PORT_TYPE 0x1847
#define LAN9303_SWE_INGRESS_PORT_TYPE_VLAN 3
#define LAN9303_BM_CFG 0x1c00
+#define LAN9303_BM_DRP_CNT_SRC_0 0x1c05
#define LAN9303_BM_EGRSS_PORT_TYPE 0x1c0c
# define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT2 (BIT(17) | BIT(16))
# define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT1 (BIT(9) | BIT(8))
# define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT0 (BIT(1) | BIT(0))
+#define LAN9303_BM_RATE_DRP_CNT_SRC_0 0x1c16
#define LAN9303_SWITCH_PORT_REG(port, reg0) (0x400 * (port) + (reg0))
@@ -978,10 +980,16 @@ static const struct lan9303_mib_desc lan9303_mib[] = {
{ .offset = LAN9303_MAC_TX_LATECOL_0, .name = "TxLateCol", },
};
+/* Buffer Management Statistics (indexed by port) */
+static const struct lan9303_mib_desc lan9303_switch_mib[] = {
+ { .offset = LAN9303_BM_RATE_DRP_CNT_SRC_0, .name = "RxDropped", },
+ { .offset = LAN9303_BM_DRP_CNT_SRC_0, .name = "TxDropped", },
+};
+
static void lan9303_get_strings(struct dsa_switch *ds, int port,
u32 stringset, uint8_t *data)
{
- unsigned int u;
+ unsigned int i, u;
if (stringset != ETH_SS_STATS)
return;
@@ -990,26 +998,44 @@ static void lan9303_get_strings(struct dsa_switch *ds, int port,
strncpy(data + u * ETH_GSTRING_LEN, lan9303_mib[u].name,
ETH_GSTRING_LEN);
}
+ for (i = 0; i < ARRAY_SIZE(lan9303_switch_mib); i++) {
+ strncpy(data + (u + i) * ETH_GSTRING_LEN,
+ lan9303_switch_mib[i].name, ETH_GSTRING_LEN);
+ }
}
static void lan9303_get_ethtool_stats(struct dsa_switch *ds, int port,
uint64_t *data)
{
struct lan9303 *chip = ds->priv;
- unsigned int u;
+ unsigned int i, u;
for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) {
u32 reg;
int ret;
- ret = lan9303_read_switch_port(
- chip, port, lan9303_mib[u].offset, ®);
-
+ /* Read Port-based MIB stats. */
+ ret = lan9303_read_switch_port(chip, port,
+ lan9303_mib[u].offset,
+ ®);
if (ret)
dev_warn(chip->dev, "Reading status port %d reg %u failed\n",
port, lan9303_mib[u].offset);
data[u] = reg;
}
+ for (i = 0; i < ARRAY_SIZE(lan9303_switch_mib); i++) {
+ u32 reg;
+ int ret;
+
+ /* Read Switch stats indexed by port. */
+ ret = lan9303_read_switch_reg(chip,
+ (lan9303_switch_mib[i].offset +
+ port), ®);
+ if (ret)
+ dev_warn(chip->dev, "Reading status port %d reg %u failed\n",
+ port, lan9303_switch_mib[i].offset);
+ data[i + u] = reg;
+ }
}
static int lan9303_get_sset_count(struct dsa_switch *ds, int port, int sset)
@@ -1017,7 +1043,7 @@ static int lan9303_get_sset_count(struct dsa_switch *ds, int port, int sset)
if (sset != ETH_SS_STATS)
return 0;
- return ARRAY_SIZE(lan9303_mib);
+ return ARRAY_SIZE(lan9303_mib) + ARRAY_SIZE(lan9303_switch_mib);
}
static int lan9303_phy_read(struct dsa_switch *ds, int phy, int regnum)
--
2.17.1
next prev parent reply other threads:[~2022-11-15 16:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-15 16:51 [net-next][PATCH v2 1/2] dsa: lan9303: Change stat name Jerry Ray
2022-11-15 16:51 ` Jerry Ray [this message]
2022-11-15 17:36 ` [net-next][PATCH v2 2/2] dsa: lan9303: Add 2 ethtool stats Andrew Lunn
2022-11-16 17:00 ` Jakub Kicinski
2022-11-15 17:30 ` [net-next][PATCH v2 1/2] dsa: lan9303: Change stat name Andrew Lunn
2022-11-16 17:08 ` Florian Fainelli
2022-11-16 17:31 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221115165131.11467-2-jerry.ray@microchip.com \
--to=jerry.ray@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).