[PATCH AUTOSEL 5.4 08/16] 9p/fd: Use P9_HDRSZ for header size

[PATCH AUTOSEL 5.4 08/16] 9p/fd: Use P9_HDRSZ for header size

[Sasha Levin]

From: GUO Zihua <guozihua@huawei.com>

[ Upstream commit 6854fadbeee10891ed74246bdc05031906b6c8cf ]

Cleanup hardcoded header sizes to use P9_HDRSZ instead of '7'

Link: https://lkml.kernel.org/r/20221117091159.31533-4-guozihua@huawei.com
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
[Dominique: commit message adjusted to make sense after offset size
adjustment got removed]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_fd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index b691871d9a02..05faded536cb 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -118,7 +118,7 @@ struct p9_conn {
 	struct list_head unsent_req_list;
 	struct p9_req_t *rreq;
 	struct p9_req_t *wreq;
-	char tmp_buf[7];
+	char tmp_buf[P9_HDRSZ];
 	struct p9_fcall rc;
 	int wpos;
 	int wsize;
@@ -289,7 +289,7 @@ static void p9_read_work(struct work_struct *work)
 	if (!m->rc.sdata) {
 		m->rc.sdata = m->tmp_buf;
 		m->rc.offset = 0;
-		m->rc.capacity = 7; /* start by reading header */
+		m->rc.capacity = P9_HDRSZ; /* start by reading header */
 	}
 
 	clear_bit(Rpending, &m->wsched);
@@ -312,7 +312,7 @@ static void p9_read_work(struct work_struct *work)
 		p9_debug(P9_DEBUG_TRANS, "got new header\n");
 
 		/* Header size */
-		m->rc.size = 7;
+		m->rc.size = P9_HDRSZ;
 		err = p9_parse_header(&m->rc, &m->rc.size, NULL, NULL, 0);
 		if (err) {
 			p9_debug(P9_DEBUG_ERROR,
-- 
2.35.1

[PATCH AUTOSEL 5.4 15/16] 9p/xen: check logical size for buffer size

[Sasha Levin]

From: Dominique Martinet <asmadeus@codewreck.org>

[ Upstream commit 391c18cf776eb4569ecda1f7794f360fe0a45a26 ]

trans_xen did not check the data fits into the buffer before copying
from the xen ring, but we probably should.
Add a check that just skips the request and return an error to
userspace if it did not fit

Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Link: https://lkml.kernel.org/r/20221118135542.63400-1-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_xen.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c
index 2779ec1053a0..f043938ae782 100644
--- a/net/9p/trans_xen.c
+++ b/net/9p/trans_xen.c
@@ -230,6 +230,14 @@ static void p9_xen_response(struct work_struct *work)
 			continue;
 		}
 
+		if (h.size > req->rc.capacity) {
+			dev_warn(&priv->dev->dev,
+				 "requested packet size too big: %d for tag %d with capacity %zd\n",
+				 h.size, h.tag, req->rc.capacity);
+			req->status = REQ_STATUS_ERROR;
+			goto recv_error;
+		}
+
 		memcpy(&req->rc, &h, sizeof(h));
 		req->rc.offset = 0;
 
@@ -239,6 +247,7 @@ static void p9_xen_response(struct work_struct *work)
 				     masked_prod, &masked_cons,
 				     XEN_9PFS_RING_SIZE);
 
+recv_error:
 		virt_mb();
 		cons += h.size;
 		ring->intf->in_cons = cons;
-- 
2.35.1

[PATCH AUTOSEL 5.4 16/16] net: usb: qmi_wwan: add u-blox 0x1342 composition

[Sasha Levin]

From: Davide Tronchin <davide.tronchin.94@gmail.com>

[ Upstream commit a487069e11b6527373f7c6f435d8998051d0b5d9 ]

Add RmNet support for LARA-L6.

LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface

In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface

Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 6f82436ff72f..e07282e6af90 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1373,6 +1373,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)},	/* Foxconn T77W968 LTE */
 	{QMI_FIXED_INTF(0x0489, 0xe0b5, 0)},	/* Foxconn T77W968 LTE with eSIM support*/
 	{QMI_FIXED_INTF(0x2692, 0x9025, 4)},    /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */
+	{QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)},	/* u-blox LARA-L6 */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-- 
2.35.1