From: Yanhong Wang <yanhong.wang@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <netdev@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Emil Renner Berthing <kernel@esmil.dk>,
Richard Cochran <richardcochran@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Peter Geis <pgwipeout@gmail.com>,
Yanhong Wang <yanhong.wang@starfivetech.com>
Subject: [PATCH v1 6/7] riscv: dts: starfive: jh7110: Add ethernet device node
Date: Thu, 1 Dec 2022 17:02:41 +0800 [thread overview]
Message-ID: <20221201090242.2381-7-yanhong.wang@starfivetech.com> (raw)
In-Reply-To: <20221201090242.2381-1-yanhong.wang@starfivetech.com>
Add JH7110 ethernet device node to support gmac driver for the JH7110
RISC-V SoC.
Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 80 ++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index c22e8f1d2640..97ed5418d91f 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -433,5 +433,85 @@
reg-shift = <2>;
status = "disabled";
};
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <4>;
+ snps,rd_osr_lmt = <4>;
+ snps,blen = <256 128 64 32 0 0 0>;
+ };
+
+ gmac0: ethernet@16030000 {
+ compatible = "starfive,dwmac", "snps,dwmac-5.20";
+ reg = <0x0 0x16030000 0x0 0x10000>;
+ clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>,
+ <&aoncrg JH7110_AONCLK_GMAC0_AHB>,
+ <&syscrg JH7110_SYSCLK_GMAC0_PTP>,
+ <&aoncrg JH7110_AONCLK_GMAC0_TX>,
+ <&syscrg JH7110_SYSCLK_GMAC0_GTXC>,
+ <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>;
+ clock-names = "stmmaceth",
+ "pclk",
+ "ptp_ref",
+ "tx",
+ "gtxc",
+ "gtx";
+ resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>,
+ <&aoncrg JH7110_AONRST_GMAC0_AHB>;
+ reset-names = "stmmaceth", "ahb";
+ interrupts = <7>, <6>, <5> ;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ phy-mode = "rgmii-id";
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <8>;
+ rx-fifo-depth = <2048>;
+ tx-fifo-depth = <2048>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,tso;
+ snps,en-tx-lpi-clockgating;
+ snps,lpi_en;
+ snps,txpbl = <16>;
+ snps,rxpbl = <16>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@16040000 {
+ compatible = "starfive,dwmac", "snps,dwmac-5.20";
+ reg = <0x0 0x16040000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>,
+ <&syscrg JH7110_SYSCLK_GMAC1_AHB>,
+ <&syscrg JH7110_SYSCLK_GMAC1_PTP>,
+ <&syscrg JH7110_SYSCLK_GMAC1_TX>,
+ <&syscrg JH7110_SYSCLK_GMAC1_GTXC>,
+ <&syscrg JH7110_SYSCLK_GMAC1_GTXCLK>;
+ clock-names = "stmmaceth",
+ "pclk",
+ "ptp_ref",
+ "tx",
+ "gtxc",
+ "gtx";
+ resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>,
+ <&syscrg JH7110_SYSRST_GMAC1_AHB>;
+ reset-names = "stmmaceth", "ahb";
+ interrupts = <78>, <77>, <76> ;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ phy-mode = "rgmii-id";
+ snps,multicast-filter-bins = <64>;
+ snps,perfect-filter-entries = <8>;
+ rx-fifo-depth = <2048>;
+ tx-fifo-depth = <2048>;
+ snps,fixed-burst;
+ snps,no-pbl-x8;
+ snps,force_thresh_dma_mode;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,tso;
+ snps,en-tx-lpi-clockgating;
+ snps,lpi_en;
+ snps,txpbl = <16>;
+ snps,rxpbl = <16>;
+ status = "disabled";
+ };
};
};
--
2.17.1
next prev parent reply other threads:[~2022-12-01 9:02 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-01 9:02 [PATCH v1 0/7] Add Ethernet driver for StarFive JH7110 SoC Yanhong Wang
2022-12-01 9:02 ` [PATCH v1 1/7] dt-bindings: net: snps,dwmac: Add compatible string for dwmac-5.20 version Yanhong Wang
2022-12-01 16:18 ` Krzysztof Kozlowski
2022-12-02 2:53 ` yanhong wang
2022-12-02 8:01 ` Krzysztof Kozlowski
2022-12-07 13:56 ` Emil Renner Berthing
2022-12-08 1:34 ` yanhong wang
2022-12-01 9:02 ` [PATCH v1 2/7] net: stmmac: platform: Add snps,dwmac-5.20 IP compatible string Yanhong Wang
2022-12-07 13:58 ` Emil Renner Berthing
2022-12-08 1:42 ` yanhong wang
2022-12-09 1:59 ` Ben Dooks
2022-12-09 2:26 ` yanhong wang
2022-12-01 9:02 ` [PATCH v1 3/7] dt-bindings: net: Add bindings for StarFive dwmac Yanhong Wang
2022-12-01 13:36 ` Rob Herring
2022-12-01 16:45 ` Conor Dooley
2022-12-02 10:52 ` Krzysztof Kozlowski
2022-12-01 16:21 ` Krzysztof Kozlowski
2022-12-01 17:35 ` Conor Dooley
2022-12-01 19:32 ` Rob Herring
2022-12-02 7:16 ` yanhong wang
2022-12-02 8:02 ` Krzysztof Kozlowski
2022-12-02 7:07 ` yanhong wang
2022-12-01 9:02 ` [PATCH v1 4/7] net: phy: motorcomm: Add YT8531 phy support Yanhong Wang
2022-12-01 15:40 ` Andrew Lunn
2022-12-06 7:39 ` yanhong wang
2022-12-01 9:02 ` [PATCH v1 5/7] net: stmmac: Add StarFive dwmac supoort Yanhong Wang
2022-12-07 14:16 ` Emil Renner Berthing
2022-12-08 2:22 ` yanhong wang
2022-12-09 2:03 ` yanhong wang
2022-12-01 9:02 ` Yanhong Wang [this message]
2022-12-01 17:45 ` [PATCH v1 6/7] riscv: dts: starfive: jh7110: Add ethernet device node Conor Dooley
2022-12-02 5:53 ` yanhong wang
2022-12-01 9:02 ` [PATCH v1 7/7] riscv: dts: starfive: visionfive-v2: Add phy delay_chain configuration Yanhong Wang
2022-12-01 17:49 ` Conor Dooley
2022-12-01 19:30 ` Conor Dooley
2022-12-01 19:42 ` Andrew Lunn
2022-12-09 1:28 ` yanhong wang
2022-12-09 1:19 ` yanhong wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221201090242.2381-7-yanhong.wang@starfivetech.com \
--to=yanhong.wang@starfivetech.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pgwipeout@gmail.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).