[PATCH net 2/3] mISDN: hfcpci: don't call dev_kfree_skb() under spin_lock_irqsave()

[Yang Yingliang <yangyingliang@huawei.com>]

It is not allowed to call consume_skb() from hardware interrupt context
or with interrupts being disabled. So replace dev_kfree_skb() with
dev_consume_skb_irq() under spin_lock_irqsave().

Fixes: 1700fe1a10dc ("Add mISDN HFC PCI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/isdn/hardware/mISDN/hfcpci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index e964a8dd8512..84b8806b4a8f 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -1621,12 +1621,12 @@ hfcpci_l2l1D(struct mISDNchannel *ch, struct sk_buff *skb)
 			Write_hfc(hc, HFCPCI_STATES, 0x40);
 			skb_queue_purge(&dch->squeue);
 			if (dch->tx_skb) {
-				dev_kfree_skb(dch->tx_skb);
+				dev_consume_skb_irq(dch->tx_skb);
 				dch->tx_skb = NULL;
 			}
 			dch->tx_idx = 0;
 			if (dch->rx_skb) {
-				dev_kfree_skb(dch->rx_skb);
+				dev_consume_skb_irq(dch->rx_skb);
 				dch->rx_skb = NULL;
 			}
 			test_and_clear_bit(FLG_TX_BUSY, &dch->Flags);
-- 
2.25.1