From: Ioana Ciornei <ioana.ciornei@nxp.com>
To: Sean Anderson <sean.anderson@seco.com>
Cc: "David S . Miller" <davem@davemloft.net>,
Russell King <linux@armlinux.org.uk>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>
Subject: Re: [PATCH net] net: dpaa2-mac: Get serdes only for backplane links
Date: Fri, 30 Dec 2022 15:32:24 +0200 [thread overview]
Message-ID: <20221230101710.btdw227v62nnj3le@skbuf> (raw)
In-Reply-To: <20221227230918.2440351-1-sean.anderson@seco.com>
Hi Sean,
On Tue, Dec 27, 2022 at 06:09:18PM -0500, Sean Anderson wrote:
> When commenting on what would become commit 085f1776fa03 ("net: dpaa2-mac:
> add backplane link mode support"), Ioana Ciornei said [1]:
>
> > ...DPMACs in TYPE_BACKPLANE can have both their PCS and SerDes managed
> > by Linux (since the firmware is not touching these). That being said,
> > DPMACs in TYPE_PHY (the type that is already supported in dpaa2-mac) can
> > also have their PCS managed by Linux (no interraction from the
> > firmware's part with the PCS, just the SerDes).
>
> This implies that Linux only manages the SerDes when the link type is
> backplane. From my testing, the link fails to come up when the link type is
> phy, but does come up when it is backplane. Modify the condition in
> dpaa2_mac_connect to reflect this, moving the existing conditions to more
> appropriate places.
>
What interface mode, firmware version etc are you testing on LS1088A?
Are you using the SerDes phy driver?
> [1] https://lore.kernel.org/netdev/20210120221900.i6esmk6uadgqpdtu@skbuf/
>
> Fixes: f978fe85b8d1 ("dpaa2-mac: configure the SerDes phy on a protocol change")
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
> I tested this on an LS1088ARDB. I would appreciate if someone could
> verify that this doesn't break anything for the LX2160A.
I will test on a LX2160A but no sooner than next Tuesday. Sorry.
>
> drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 16 ++++++++++------
> 1 file changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> index c886f33f8c6f..0693d3623a76 100644
> --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
> @@ -179,9 +179,13 @@ static void dpaa2_mac_config(struct phylink_config *config, unsigned int mode,
> if (err)
> netdev_err(mac->net_dev, "dpmac_set_protocol() = %d\n", err);
>
> - err = phy_set_mode_ext(mac->serdes_phy, PHY_MODE_ETHERNET, state->interface);
> - if (err)
> - netdev_err(mac->net_dev, "phy_set_mode_ext() = %d\n", err);
> + if (!phy_interface_mode_is_rgmii(mode)) {
> + err = phy_set_mode_ext(mac->serdes_phy, PHY_MODE_ETHERNET,
> + state->interface);
> + if (err)
> + netdev_err(mac->net_dev, "phy_set_mode_ext() = %d\n",
> + err);
> + }
> }
This check is not necessary. Just above the snippet shown here is:
if (!mac->serdes_phy)
return;
And the 'serdes_phy' is only setup if the interface mode is not a rgmii.
if (mac->features & DPAA2_MAC_FEATURE_PROTOCOL_CHANGE &&
!phy_interface_mode_is_rgmii(mac->if_mode) &&
is_of_node(dpmac_node)) {
serdes_phy = of_phy_get(to_of_node(dpmac_node), NULL);
if (serdes_phy == ERR_PTR(-ENODEV))
serdes_phy = NULL;
else if (IS_ERR(serdes_phy))
return PTR_ERR(serdes_phy);
else
phy_init(serdes_phy);
}
mac->serdes_phy = serdes_phy;
>
> static void dpaa2_mac_link_up(struct phylink_config *config,
> @@ -317,7 +321,8 @@ static void dpaa2_mac_set_supported_interfaces(struct dpaa2_mac *mac)
> }
> }
>
> - if (!mac->serdes_phy)
> + if (!(mac->features & !DPAA2_MAC_FEATURE_PROTOCOL_CHANGE) ||
> + !mac->serdes_phy)
> return;
>
> /* In case we have access to the SerDes phy/lane, then ask the SerDes
> @@ -377,8 +382,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
> return -EINVAL;
> mac->if_mode = err;
>
> - if (mac->features & DPAA2_MAC_FEATURE_PROTOCOL_CHANGE &&
> - !phy_interface_mode_is_rgmii(mac->if_mode) &&
> + if (mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE &&
> is_of_node(dpmac_node)) {
> serdes_phy = of_phy_get(to_of_node(dpmac_node), NULL);
>
If the goal is to restrict the serdes_phy setup only if in _BACKPLANE
mode, then why not just add another restriction here directly?
What I mean is not to remove any checks from this if statement but
rather add another one. And this would be the only change needed.
Ioana
next prev parent reply other threads:[~2022-12-30 13:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-27 23:09 [PATCH net] net: dpaa2-mac: Get serdes only for backplane links Sean Anderson
2022-12-30 4:09 ` Jakub Kicinski
2022-12-30 15:23 ` Sean Anderson
2022-12-30 13:32 ` Ioana Ciornei [this message]
2022-12-30 15:29 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221230101710.btdw227v62nnj3le@skbuf \
--to=ioana.ciornei@nxp.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sean.anderson@seco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox