netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yanhong Wang <yanhong.wang@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <netdev@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: "David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Richard Cochran <richardcochran@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Peter Geis <pgwipeout@gmail.com>,
	Yanhong Wang <yanhong.wang@starfivetech.com>
Subject: [PATCH v4 6/7] riscv: dts: starfive: jh7110: Add ethernet device node
Date: Wed, 18 Jan 2023 14:17:00 +0800	[thread overview]
Message-ID: <20230118061701.30047-7-yanhong.wang@starfivetech.com> (raw)
In-Reply-To: <20230118061701.30047-1-yanhong.wang@starfivetech.com>

Add JH7110 ethernet device node to support gmac driver for the JH7110
RISC-V SoC.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 93 ++++++++++++++++++++++++
 1 file changed, 93 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index c22e8f1d2640..c6de6e3b1a25 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -433,5 +433,98 @@
 			reg-shift = <2>;
 			status = "disabled";
 		};
+
+		stmmac_axi_setup: stmmac-axi-config {
+			snps,lpi_en;
+			snps,wr_osr_lmt = <4>;
+			snps,rd_osr_lmt = <4>;
+			snps,blen = <256 128 64 32 0 0 0>;
+		};
+
+		gmac0: ethernet@16030000 {
+			compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+			reg = <0x0 0x16030000 0x0 0x10000>;
+			clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>,
+				 <&aoncrg JH7110_AONCLK_GMAC0_AHB>,
+				 <&syscrg JH7110_SYSCLK_GMAC0_PTP>,
+				 <&aoncrg JH7110_AONCLK_GMAC0_TX>,
+				 <&syscrg JH7110_SYSCLK_GMAC0_GTXC>,
+				 <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+						"tx", "gtxc", "gtx";
+			resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>,
+				 <&aoncrg JH7110_AONRST_GMAC0_AHB>;
+			reset-names = "stmmaceth", "ahb";
+			interrupts = <7>, <6>, <5>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			phy-mode = "rgmii-id";
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <8>;
+			rx-fifo-depth = <2048>;
+			tx-fifo-depth = <2048>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,tso;
+			snps,en-tx-lpi-clockgating;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			status = "disabled";
+			phy-handle = <&phy0>;
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+		};
+
+		gmac1: ethernet@16040000 {
+			compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+			reg = <0x0 0x16040000 0x0 0x10000>;
+			clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_AHB>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_PTP>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_TX>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_GTXC>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_GTXCLK>;
+			clock-names = "stmmaceth", "pclk", "ptp_ref",
+					"tx", "gtxc", "gtx";
+			resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>,
+				 <&syscrg JH7110_SYSRST_GMAC1_AHB>;
+			reset-names = "stmmaceth", "ahb";
+			interrupts = <78>, <77>, <76>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			phy-mode = "rgmii-id";
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <8>;
+			rx-fifo-depth = <2048>;
+			tx-fifo-depth = <2048>;
+			snps,fixed-burst;
+			snps,no-pbl-x8;
+			snps,force_thresh_dma_mode;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,tso;
+			snps,en-tx-lpi-clockgating;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			status = "disabled";
+			phy-handle = <&phy1>;
+
+			mdio1: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
 	};
 };
-- 
2.17.1


  parent reply	other threads:[~2023-01-18  6:29 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-18  6:16 [PATCH v4 0/7] Add Ethernet driver for StarFive JH7110 SoC Yanhong Wang
2023-01-18  6:16 ` [PATCH v4 1/7] dt-bindings: net: snps,dwmac: Add dwmac-5.20 version Yanhong Wang
2023-01-18  6:16 ` [PATCH v4 2/7] dt-bindings: net: snps,dwmac: Update the maxitems number of resets and reset-names Yanhong Wang
2023-01-18 13:10   ` Rob Herring
2023-01-18 15:46   ` Krzysztof Kozlowski
2023-01-18 15:47   ` Krzysztof Kozlowski
2023-02-07  2:43     ` yanhong wang
2023-02-07  7:59       ` Krzysztof Kozlowski
2023-02-15  7:46         ` yanhong wang
2023-02-16  8:13           ` Krzysztof Kozlowski
2023-01-18  6:16 ` [PATCH v4 3/7] net: stmmac: platform: Add snps,dwmac-5.20 IP compatible string Yanhong Wang
2023-01-18  6:16 ` [PATCH v4 4/7] dt-bindings: net: Add support StarFive dwmac Yanhong Wang
2023-01-18 15:49   ` Krzysztof Kozlowski
2023-02-03  5:58     ` yanhong wang
2023-01-18  6:16 ` [PATCH v4 5/7] net: stmmac: Add glue layer for StarFive JH7110 SoCs Yanhong Wang
2023-02-16 10:53   ` Emil Renner Berthing
2023-02-21  2:27     ` yanhong wang
2023-02-26 15:15       ` Emil Renner Berthing
2023-01-18  6:17 ` Yanhong Wang [this message]
2023-01-18 15:51   ` [PATCH v4 6/7] riscv: dts: starfive: jh7110: Add ethernet device node Krzysztof Kozlowski
2023-02-03  3:14     ` yanhong wang
2023-02-03  7:09       ` Krzysztof Kozlowski
2023-02-03  7:40         ` yanhong wang
2023-02-03  7:56           ` Krzysztof Kozlowski
2023-02-03  9:01             ` yanhong wang
2023-02-20 14:22   ` Emil Renner Berthing
2023-02-20 15:00     ` Emil Renner Berthing
2023-01-18  6:17 ` [PATCH v4 7/7] riscv: dts: starfive: visionfive-v2: Enable gmac device tree node Yanhong Wang
2023-02-20 14:05   ` Emil Renner Berthing
2023-01-18 23:21 ` [PATCH v4 0/7] Add Ethernet driver for StarFive JH7110 SoC Conor Dooley
2023-02-03  3:02   ` yanhong wang
2023-02-04 14:22     ` Conor Dooley
2023-02-04 17:16       ` Andrew Lunn
2023-02-05 10:11         ` Conor Dooley
2023-02-06  1:15         ` yanhong wang
2023-02-06  1:05       ` yanhong wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230118061701.30047-7-yanhong.wang@starfivetech.com \
    --to=yanhong.wang@starfivetech.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kernel@esmil.dk \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pgwipeout@gmail.com \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).