[PATCH net-next 33/47] can: bittiming: can_fixup_bittiming(): set effective tq

[Marc Kleine-Budde <mkl@pengutronix.de>]

The can_fixup_bittiming() function is used to validate the
user-supplied low-level bit timing parameters and calculate the
bitrate prescaler (brp) from the requested time quanta (tq) and the
CAN clock of the controller.

can_fixup_bittiming() selects the best matching integer bit rate
prescaler, which may result in a different time quantum than the value
specified by the user.

Calculate the resulting time quantum and assign it so that the user
sees the effective time quantum.

Link: https://lore.kernel.org/all/20230202110854.2318594-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev/bittiming.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/can/dev/bittiming.c b/drivers/net/can/dev/bittiming.c
index 5e111dbbe090..e4917c2f34d3 100644
--- a/drivers/net/can/dev/bittiming.c
+++ b/drivers/net/can/dev/bittiming.c
@@ -40,6 +40,8 @@ static int can_fixup_bittiming(const struct net_device *dev, struct can_bittimin
 
 	bt->bitrate = priv->clock.freq / (bt->brp * can_bit_time(bt));
 	bt->sample_point = ((CAN_SYNC_SEG + tseg1) * 1000) / can_bit_time(bt);
+	bt->tq = DIV_U64_ROUND_CLOSEST(mul_u32_u32(bt->brp, NSEC_PER_SEC),
+				       priv->clock.freq);
 
 	return 0;
 }
-- 
2.39.1