From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>,
netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>,
Dragos Tatulea <dtatulea@nvidia.com>,
Gal Pressman <gal@nvidia.com>
Subject: [net 05/10] net/mlx5e: IPoIB, Show unknown speed instead of error
Date: Tue, 7 Feb 2023 19:02:57 -0800 [thread overview]
Message-ID: <20230208030302.95378-6-saeed@kernel.org> (raw)
In-Reply-To: <20230208030302.95378-1-saeed@kernel.org>
From: Dragos Tatulea <dtatulea@nvidia.com>
ethtool is returning an error for unknown speeds for the IPoIB interface:
$ ethtool ib0
netlink error: failed to retrieve link settings
netlink error: Invalid argument
netlink error: failed to retrieve link settings
netlink error: Invalid argument
Settings for ib0:
Link detected: no
After this change, ethtool will return success and show "unknown speed":
$ ethtool ib0
Settings for ib0:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: no
Fixes: eb234ee9d541 ("net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
index eff92dc0927c..e09518f887a0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
@@ -189,16 +189,16 @@ static inline int mlx5_ptys_rate_enum_to_int(enum mlx5_ptys_rate rate)
}
}
-static int mlx5i_get_speed_settings(u16 ib_link_width_oper, u16 ib_proto_oper)
+static u32 mlx5i_get_speed_settings(u16 ib_link_width_oper, u16 ib_proto_oper)
{
int rate, width;
rate = mlx5_ptys_rate_enum_to_int(ib_proto_oper);
if (rate < 0)
- return -EINVAL;
+ return SPEED_UNKNOWN;
width = mlx5_ptys_width_enum_to_int(ib_link_width_oper);
if (width < 0)
- return -EINVAL;
+ return SPEED_UNKNOWN;
return rate * width;
}
@@ -221,16 +221,13 @@ static int mlx5i_get_link_ksettings(struct net_device *netdev,
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
speed = mlx5i_get_speed_settings(ib_link_width_oper, ib_proto_oper);
- if (speed < 0)
- return -EINVAL;
+ link_ksettings->base.speed = speed;
+ link_ksettings->base.duplex = speed == SPEED_UNKNOWN ? DUPLEX_UNKNOWN : DUPLEX_FULL;
- link_ksettings->base.duplex = DUPLEX_FULL;
link_ksettings->base.port = PORT_OTHER;
link_ksettings->base.autoneg = AUTONEG_DISABLE;
- link_ksettings->base.speed = speed;
-
return 0;
}
--
2.39.1
next prev parent reply other threads:[~2023-02-08 3:03 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-08 3:02 [pull request][net 00/10] mlx5 fixes 2023-02-07 Saeed Mahameed
2023-02-08 3:02 ` [net 01/10] net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change Saeed Mahameed
2023-02-09 5:00 ` patchwork-bot+netdevbpf
2023-02-08 3:02 ` [net 02/10] net/mlx5: DR, Fix potential race in dr_rule_create_rule_nic Saeed Mahameed
2023-02-08 3:02 ` [net 03/10] net/mlx5: Bridge, fix ageing of peer FDB entries Saeed Mahameed
2023-02-08 3:02 ` [net 04/10] net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev mode Saeed Mahameed
2023-02-08 3:02 ` Saeed Mahameed [this message]
2023-02-08 3:02 ` [net 06/10] net/mlx5: Store page counters in a single array Saeed Mahameed
2023-02-08 3:02 ` [net 07/10] net/mlx5: Expose SF firmware pages counter Saeed Mahameed
2023-02-08 3:03 ` [net 08/10] net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers Saeed Mahameed
2023-02-08 3:03 ` [net 09/10] net/mlx5: fw_tracer, Zero consumer index when reloading the tracer Saeed Mahameed
2023-02-08 3:03 ` [net 10/10] net/mlx5: Serialize module cleanup with reload and remove Saeed Mahameed
2023-02-08 12:40 ` [pull request][net 00/10] mlx5 fixes 2023-02-07 Vadim Fedorenko
[not found] ` <DM5PR12MB134054EC92BC13E36B6C5711B3D89@DM5PR12MB1340.namprd12.prod.outlook.com>
2023-02-08 21:16 ` Rahul Rameshbabu
2023-02-08 21:36 ` Vadim Fedorenko
2023-02-08 23:52 ` Rahul Rameshbabu
2023-02-09 1:10 ` Vadim Fedorenko
2023-02-15 3:19 ` Rahul Rameshbabu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230208030302.95378-6-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=dtatulea@nvidia.com \
--cc=edumazet@google.com \
--cc=gal@nvidia.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).