netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Clément Léger" <clement.leger@bootlin.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: "Clément Léger" <clement.leger@bootlin.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Herve Codina" <herve.codina@bootlin.com>,
	"Miquèl Raynal" <miquel.raynal@bootlin.com>,
	"Milan Stevanovic" <milan.stevanovic@se.com>,
	"Jimmy Lalande" <jimmy.lalande@se.com>,
	"Pascal Eberhard" <pascal.eberhard@se.com>,
	"Arun Ramadoss" <Arun.Ramadoss@microchip.com>,
	linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 3/3] net: dsa: rzn1-a5psw: add vlan support
Date: Wed,  8 Feb 2023 17:17:49 +0100	[thread overview]
Message-ID: <20230208161749.331965-4-clement.leger@bootlin.com> (raw)
In-Reply-To: <20230208161749.331965-1-clement.leger@bootlin.com>

Add support for vlan operation (add, del, filtering) on the RZN1
driver. The a5psw switch supports up to 32 VLAN IDs with filtering,
tagged/untagged VLANs and PVID for each ports.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 drivers/net/dsa/rzn1_a5psw.c | 167 +++++++++++++++++++++++++++++++++++
 drivers/net/dsa/rzn1_a5psw.h |   8 +-
 2 files changed, 172 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index 0ce3948952db..de6b18ec647d 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -583,6 +583,147 @@ static int a5psw_port_fdb_dump(struct dsa_switch *ds, int port,
 	return ret;
 }
 
+static int a5psw_port_vlan_filtering(struct dsa_switch *ds, int port,
+				     bool vlan_filtering,
+				     struct netlink_ext_ack *extack)
+{
+	u32 mask = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
+		   BIT(port + A5PSW_VLAN_DISC_SHIFT);
+	struct a5psw *a5psw = ds->priv;
+	u32 val = 0;
+
+	if (vlan_filtering)
+		val = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
+		      BIT(port + A5PSW_VLAN_DISC_SHIFT);
+
+	a5psw_reg_rmw(a5psw, A5PSW_VLAN_VERIFY, mask, val);
+
+	return 0;
+}
+
+static int a5psw_find_vlan_entry(struct a5psw *a5psw, u16 vid)
+{
+	u32 vlan_res;
+	int i;
+
+	/* Find vlan for this port */
+	for (i = 0; i < A5PSW_VLAN_COUNT; i++) {
+		vlan_res = a5psw_reg_readl(a5psw, A5PSW_VLAN_RES(i));
+		if (FIELD_GET(A5PSW_VLAN_RES_VLANID, vlan_res) == vid)
+			return i;
+	}
+
+	return -1;
+}
+
+static int a5psw_get_vlan_res_entry(struct a5psw *a5psw, u16 newvid)
+{
+	u32 vlan_res;
+	int i;
+
+	/* Find a free VLAN entry */
+	for (i = 0; i < A5PSW_VLAN_COUNT; i++) {
+		vlan_res = a5psw_reg_readl(a5psw, A5PSW_VLAN_RES(i));
+		if (!(FIELD_GET(A5PSW_VLAN_RES_PORTMASK, vlan_res))) {
+			vlan_res = FIELD_PREP(A5PSW_VLAN_RES_VLANID, newvid);
+			a5psw_reg_writel(a5psw, A5PSW_VLAN_RES(i), vlan_res);
+			return i;
+		}
+	}
+
+	return -1;
+}
+
+static void a5psw_port_vlan_tagged_cfg(struct a5psw *a5psw, int vlan_res_id,
+				       int port, bool set)
+{
+	u32 mask = A5PSW_VLAN_RES_WR_PORTMASK | A5PSW_VLAN_RES_RD_TAGMASK |
+		   BIT(port);
+	u32 vlan_res_off = A5PSW_VLAN_RES(vlan_res_id);
+	u32 val = A5PSW_VLAN_RES_WR_TAGMASK, reg;
+
+	if (set)
+		val |= BIT(port);
+
+	/* Toggle tag mask read */
+	a5psw_reg_writel(a5psw, vlan_res_off, A5PSW_VLAN_RES_RD_TAGMASK);
+	reg = a5psw_reg_readl(a5psw, vlan_res_off);
+	a5psw_reg_writel(a5psw, vlan_res_off, A5PSW_VLAN_RES_RD_TAGMASK);
+
+	reg &= ~mask;
+	reg |= val;
+	a5psw_reg_writel(a5psw, vlan_res_off, reg);
+}
+
+static void a5psw_port_vlan_cfg(struct a5psw *a5psw, int vlan_res_id, int port,
+				bool set)
+{
+	u32 mask = A5PSW_VLAN_RES_WR_TAGMASK | BIT(port);
+	u32 reg = A5PSW_VLAN_RES_WR_PORTMASK;
+
+	if (set)
+		reg |= BIT(port);
+
+	a5psw_reg_rmw(a5psw, A5PSW_VLAN_RES(vlan_res_id), mask, reg);
+}
+
+static int a5psw_port_vlan_add(struct dsa_switch *ds, int port,
+			       const struct switchdev_obj_port_vlan *vlan,
+			       struct netlink_ext_ack *extack)
+{
+	bool tagged = !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
+	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+	struct a5psw *a5psw = ds->priv;
+	u16 vid = vlan->vid;
+	int vlan_res_id;
+
+	dev_dbg(a5psw->dev, "Add VLAN %d on port %d, %s, %s\n",
+		vid, port, tagged ? "tagged" : "untagged",
+		pvid ? "PVID" : "no PVID");
+
+	vlan_res_id = a5psw_find_vlan_entry(a5psw, vid);
+	if (vlan_res_id < 0) {
+		vlan_res_id = a5psw_get_vlan_res_entry(a5psw, vid);
+		if (vlan_res_id < 0)
+			return -EINVAL;
+	}
+
+	a5psw_port_vlan_cfg(a5psw, vlan_res_id, port, true);
+	if (tagged)
+		a5psw_port_vlan_tagged_cfg(a5psw, vlan_res_id, port, true);
+
+	if (pvid) {
+		a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE_ENA, BIT(port),
+			      BIT(port));
+		a5psw_reg_writel(a5psw, A5PSW_SYSTEM_TAGINFO(port), vid);
+	}
+
+	return 0;
+}
+
+static int a5psw_port_vlan_del(struct dsa_switch *ds, int port,
+			       const struct switchdev_obj_port_vlan *vlan)
+{
+	struct a5psw *a5psw = ds->priv;
+	u16 vid = vlan->vid;
+	int vlan_res_id;
+
+	dev_dbg(a5psw->dev, "Removing VLAN %d on port %d\n", vid, port);
+
+	vlan_res_id = a5psw_find_vlan_entry(a5psw, vid);
+	if (vlan_res_id < 0)
+		return -EINVAL;
+
+	a5psw_port_vlan_cfg(a5psw, vlan_res_id, port, false);
+	a5psw_port_vlan_tagged_cfg(a5psw, vlan_res_id, port, false);
+
+	/* Disable PVID if the vid is matching the port one */
+	if (vid == a5psw_reg_readl(a5psw, A5PSW_SYSTEM_TAGINFO(port)))
+		a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE_ENA, BIT(port), 0);
+
+	return 0;
+}
+
 static u64 a5psw_read_stat(struct a5psw *a5psw, u32 offset, int port)
 {
 	u32 reg_lo, reg_hi;
@@ -700,6 +841,27 @@ static void a5psw_get_eth_ctrl_stats(struct dsa_switch *ds, int port,
 	ctrl_stats->MACControlFramesReceived = stat;
 }
 
+static void a5psw_vlan_setup(struct a5psw *a5psw, int port)
+{
+	u32 reg;
+
+	/* Enable TAG always mode for the port, this is actually controlled
+	 * by VLAN_IN_MODE_ENA field which will be used for PVID insertion
+	 */
+	reg = A5PSW_VLAN_IN_MODE_TAG_ALWAYS;
+	reg <<= A5PSW_VLAN_IN_MODE_PORT_SHIFT(port);
+	a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE, A5PSW_VLAN_IN_MODE_PORT(port),
+		      reg);
+
+	/* Set transparent mode for output frame manipulation, this will depend
+	 * on the VLAN_RES configuration mode
+	 */
+	reg = A5PSW_VLAN_OUT_MODE_TRANSPARENT;
+	reg <<= A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port);
+	a5psw_reg_rmw(a5psw, A5PSW_VLAN_OUT_MODE,
+		      A5PSW_VLAN_OUT_MODE_PORT(port), reg);
+}
+
 static int a5psw_setup(struct dsa_switch *ds)
 {
 	struct a5psw *a5psw = ds->priv;
@@ -772,6 +934,8 @@ static int a5psw_setup(struct dsa_switch *ds)
 		/* Enable management forward only for user ports */
 		if (dsa_port_is_user(dp))
 			a5psw_port_mgmtfwd_set(a5psw, port, true);
+
+		a5psw_vlan_setup(a5psw, port);
 	}
 
 	return 0;
@@ -801,6 +965,9 @@ static const struct dsa_switch_ops a5psw_switch_ops = {
 	.port_bridge_flags = a5psw_port_bridge_flags,
 	.port_stp_state_set = a5psw_port_stp_state_set,
 	.port_fast_age = a5psw_port_fast_age,
+	.port_vlan_filtering = a5psw_port_vlan_filtering,
+	.port_vlan_add = a5psw_port_vlan_add,
+	.port_vlan_del = a5psw_port_vlan_del,
 	.port_fdb_add = a5psw_port_fdb_add,
 	.port_fdb_del = a5psw_port_fdb_del,
 	.port_fdb_dump = a5psw_port_fdb_dump,
diff --git a/drivers/net/dsa/rzn1_a5psw.h b/drivers/net/dsa/rzn1_a5psw.h
index c67abd49c013..2bad2e3edc2a 100644
--- a/drivers/net/dsa/rzn1_a5psw.h
+++ b/drivers/net/dsa/rzn1_a5psw.h
@@ -50,7 +50,9 @@
 #define A5PSW_VLAN_IN_MODE_TAG_ALWAYS		0x2
 
 #define A5PSW_VLAN_OUT_MODE		0x2C
-#define A5PSW_VLAN_OUT_MODE_PORT(port)	(GENMASK(1, 0) << ((port) * 2))
+#define A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port)	((port) * 2)
+#define A5PSW_VLAN_OUT_MODE_PORT(port)	(GENMASK(1, 0) << \
+					A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port))
 #define A5PSW_VLAN_OUT_MODE_DIS		0x0
 #define A5PSW_VLAN_OUT_MODE_STRIP	0x1
 #define A5PSW_VLAN_OUT_MODE_TAG_THROUGH	0x2
@@ -59,7 +61,7 @@
 #define A5PSW_VLAN_IN_MODE_ENA		0x30
 #define A5PSW_VLAN_TAG_ID		0x34
 
-#define A5PSW_SYSTEM_TAGINFO(port)	(0x200 + A5PSW_PORT_OFFSET(port))
+#define A5PSW_SYSTEM_TAGINFO(port)	(0x200 + 4 * (port))
 
 #define A5PSW_AUTH_PORT(port)		(0x240 + 4 * (port))
 #define A5PSW_AUTH_PORT_AUTHORIZED	BIT(0)
@@ -68,7 +70,7 @@
 #define A5PSW_VLAN_RES_WR_PORTMASK	BIT(30)
 #define A5PSW_VLAN_RES_WR_TAGMASK	BIT(29)
 #define A5PSW_VLAN_RES_RD_TAGMASK	BIT(28)
-#define A5PSW_VLAN_RES_ID		GENMASK(16, 5)
+#define A5PSW_VLAN_RES_VLANID		GENMASK(16, 5)
 #define A5PSW_VLAN_RES_PORTMASK		GENMASK(4, 0)
 
 #define A5PSW_RXMATCH_CONFIG(port)	(0x3e80 + 4 * (port))
-- 
2.39.0


  parent reply	other threads:[~2023-02-08 16:16 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-08 16:17 [PATCH net-next v3 0/3] net: dsa: rzn1-a5psw: add support for vlan and .port_bridge_flags Clément Léger
2023-02-08 16:17 ` [PATCH net-next v3 1/3] net: dsa: rzn1-a5psw: use a5psw_reg_rmw() to modify flooding resolution Clément Léger
2023-02-08 17:26   ` Florian Fainelli
2023-02-08 21:37   ` Vladimir Oltean
2023-02-09  8:40     ` Clément Léger
2023-02-08 16:17 ` [PATCH net-next v3 2/3] net: dsa: rzn1-a5psw: add support for .port_bridge_flags Clément Léger
2023-02-08 17:27   ` Florian Fainelli
2023-02-08 16:17 ` Clément Léger [this message]
2023-02-08 17:38   ` [PATCH net-next v3 3/3] net: dsa: rzn1-a5psw: add vlan support Florian Fainelli
2023-02-08 22:02     ` Vladimir Oltean
2023-02-09  8:44       ` Clément Léger
2023-02-09 13:50     ` Clément Léger
2023-02-08 22:03   ` Vladimir Oltean
2023-02-09  8:47     ` Clément Léger
2023-02-09  8:15   ` Arun.Ramadoss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230208161749.331965-4-clement.leger@bootlin.com \
    --to=clement.leger@bootlin.com \
    --cc=Arun.Ramadoss@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=herve.codina@bootlin.com \
    --cc=jimmy.lalande@se.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=milan.stevanovic@se.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=pascal.eberhard@se.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).