[PATCH 0/3] net: dsa: rzn1-a5psw: add supoport for vlan and .port_bridge_flags

[PATCH 0/3] net: dsa: rzn1-a5psw: add supoport for vlan and .port_bridge_flags

[Clément Léger]

While adding support for VLAN, bridge_vlan_unaware.sh and
bridge_vlan_aware.sh were executed and requires .port_bridge_flags
to disable flooding on some specific port. Thus, this series adds
both vlan support and .port_bridge_flags.

----
V2:
 - Fixed a few formatting errors
 - Add .port_bridge_flags implementation

Clément Léger (3):
  net: dsa: rzn1-a5psw: use a5psw_reg_rmw() to modify flooding
    resolution
  net: dsa: rzn1-a5psw: add support for .port_bridge_flags
  net: dsa: rzn1-a5psw: add vlan support

 drivers/net/dsa/rzn1_a5psw.c | 224 ++++++++++++++++++++++++++++++++++-
 drivers/net/dsa/rzn1_a5psw.h |   8 +-
 2 files changed, 223 insertions(+), 9 deletions(-)

-- 
2.39.0

[PATCH 1/3] net: dsa: rzn1-a5psw: use a5psw_reg_rmw() to modify flooding resolution

[Clément Léger]

.port_bridge_flags will be added and allows to modify the flood mask
independently for each port. Keeping the existing bridged_ports write
in a5psw_flooding_set_resolution() would potentially messed up this.
Use a read-modify-write to set that value and move bridged_ports
handling in bridge_port_join/leave.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 drivers/net/dsa/rzn1_a5psw.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index 919027cf2012..8b7d4a371f8b 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -299,13 +299,9 @@ static void a5psw_flooding_set_resolution(struct a5psw *a5psw, int port,
 			A5PSW_MCAST_DEF_MASK};
 	int i;
 
-	if (set)
-		a5psw->bridged_ports |= BIT(port);
-	else
-		a5psw->bridged_ports &= ~BIT(port);
-
 	for (i = 0; i < ARRAY_SIZE(offsets); i++)
-		a5psw_reg_writel(a5psw, offsets[i], a5psw->bridged_ports);
+		a5psw_reg_rmw(a5psw, offsets[i], BIT(port),
+			      set ? BIT(port) : 0);
 }
 
 static int a5psw_port_bridge_join(struct dsa_switch *ds, int port,
@@ -326,6 +322,8 @@ static int a5psw_port_bridge_join(struct dsa_switch *ds, int port,
 	a5psw_flooding_set_resolution(a5psw, port, true);
 	a5psw_port_mgmtfwd_set(a5psw, port, false);
 
+	a5psw->bridged_ports |= BIT(port);
+
 	return 0;
 }
 
@@ -334,6 +332,8 @@ static void a5psw_port_bridge_leave(struct dsa_switch *ds, int port,
 {
 	struct a5psw *a5psw = ds->priv;
 
+	a5psw->bridged_ports &= ~BIT(port);
+
 	a5psw_flooding_set_resolution(a5psw, port, false);
 	a5psw_port_mgmtfwd_set(a5psw, port, true);
 
-- 
2.39.0

[PATCH 2/3] net: dsa: rzn1-a5psw: add support for .port_bridge_flags

[Clément Léger]

When running vlan test (bridge_vlan_aware/unaware.sh), there were some
failure due to the lack .port_bridge_flag function to disable port
flooding. Implement this operation for BR_LEARNING, BR_FLOOD,
BR_MCAST_FLOOD and BR_BCAST_FLOOD.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 drivers/net/dsa/rzn1_a5psw.c | 45 ++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index 8b7d4a371f8b..0ce3948952db 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -342,6 +342,49 @@ static void a5psw_port_bridge_leave(struct dsa_switch *ds, int port,
 		a5psw->br_dev = NULL;
 }
 
+static int a5psw_port_pre_bridge_flags(struct dsa_switch *ds, int port,
+				       struct switchdev_brport_flags flags,
+				       struct netlink_ext_ack *extack)
+{
+	if (flags.mask & ~(BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD |
+			   BR_BCAST_FLOOD))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int
+a5psw_port_bridge_flags(struct dsa_switch *ds, int port,
+			struct switchdev_brport_flags flags,
+			struct netlink_ext_ack *extack)
+{
+	struct a5psw *a5psw = ds->priv;
+	u32 val;
+
+	if (flags.mask & BR_LEARNING) {
+		val = flags.val & BR_LEARNING ? 0 : A5PSW_INPUT_LEARN_DIS(port);
+		a5psw_reg_rmw(a5psw, A5PSW_INPUT_LEARN,
+			      A5PSW_INPUT_LEARN_DIS(port), val);
+	}
+
+	if (flags.mask & BR_FLOOD) {
+		val = flags.val & BR_FLOOD ? BIT(port) : 0;
+		a5psw_reg_rmw(a5psw, A5PSW_UCAST_DEF_MASK, BIT(port), val);
+	}
+
+	if (flags.mask & BR_MCAST_FLOOD) {
+		val = flags.val & BR_MCAST_FLOOD ? BIT(port) : 0;
+		a5psw_reg_rmw(a5psw, A5PSW_MCAST_DEF_MASK, BIT(port), val);
+	}
+
+	if (flags.mask & BR_BCAST_FLOOD) {
+		val = flags.val & BR_BCAST_FLOOD ? BIT(port) : 0;
+		a5psw_reg_rmw(a5psw, A5PSW_BCAST_DEF_MASK, BIT(port), val);
+	}
+
+	return 0;
+}
+
 static void a5psw_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
 {
 	u32 mask = A5PSW_INPUT_LEARN_DIS(port) | A5PSW_INPUT_LEARN_BLOCK(port);
@@ -754,6 +797,8 @@ static const struct dsa_switch_ops a5psw_switch_ops = {
 	.set_ageing_time = a5psw_set_ageing_time,
 	.port_bridge_join = a5psw_port_bridge_join,
 	.port_bridge_leave = a5psw_port_bridge_leave,
+	.port_pre_bridge_flags = a5psw_port_pre_bridge_flags,
+	.port_bridge_flags = a5psw_port_bridge_flags,
 	.port_stp_state_set = a5psw_port_stp_state_set,
 	.port_fast_age = a5psw_port_fast_age,
 	.port_fdb_add = a5psw_port_fdb_add,
-- 
2.39.0

[PATCH 3/3] net: dsa: rzn1-a5psw: add vlan support

[Clément Léger]

Add support for vlan operation (add, del, filtering) on the RZN1
driver. The a5psw switch supports up to 32 VLAN IDs with filtering,
tagged/untagged VLANs and PVID for each ports.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 drivers/net/dsa/rzn1_a5psw.c | 167 +++++++++++++++++++++++++++++++++++
 drivers/net/dsa/rzn1_a5psw.h |   8 +-
 2 files changed, 172 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index 0ce3948952db..de6b18ec647d 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -583,6 +583,147 @@ static int a5psw_port_fdb_dump(struct dsa_switch *ds, int port,
 	return ret;
 }
 
+static int a5psw_port_vlan_filtering(struct dsa_switch *ds, int port,
+				     bool vlan_filtering,
+				     struct netlink_ext_ack *extack)
+{
+	u32 mask = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
+		   BIT(port + A5PSW_VLAN_DISC_SHIFT);
+	struct a5psw *a5psw = ds->priv;
+	u32 val = 0;
+
+	if (vlan_filtering)
+		val = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
+		      BIT(port + A5PSW_VLAN_DISC_SHIFT);
+
+	a5psw_reg_rmw(a5psw, A5PSW_VLAN_VERIFY, mask, val);
+
+	return 0;
+}
+
+static int a5psw_find_vlan_entry(struct a5psw *a5psw, u16 vid)
+{
+	u32 vlan_res;
+	int i;
+
+	/* Find vlan for this port */
+	for (i = 0; i < A5PSW_VLAN_COUNT; i++) {
+		vlan_res = a5psw_reg_readl(a5psw, A5PSW_VLAN_RES(i));
+		if (FIELD_GET(A5PSW_VLAN_RES_VLANID, vlan_res) == vid)
+			return i;
+	}
+
+	return -1;
+}
+
+static int a5psw_get_vlan_res_entry(struct a5psw *a5psw, u16 newvid)
+{
+	u32 vlan_res;
+	int i;
+
+	/* Find a free VLAN entry */
+	for (i = 0; i < A5PSW_VLAN_COUNT; i++) {
+		vlan_res = a5psw_reg_readl(a5psw, A5PSW_VLAN_RES(i));
+		if (!(FIELD_GET(A5PSW_VLAN_RES_PORTMASK, vlan_res))) {
+			vlan_res = FIELD_PREP(A5PSW_VLAN_RES_VLANID, newvid);
+			a5psw_reg_writel(a5psw, A5PSW_VLAN_RES(i), vlan_res);
+			return i;
+		}
+	}
+
+	return -1;
+}
+
+static void a5psw_port_vlan_tagged_cfg(struct a5psw *a5psw, int vlan_res_id,
+				       int port, bool set)
+{
+	u32 mask = A5PSW_VLAN_RES_WR_PORTMASK | A5PSW_VLAN_RES_RD_TAGMASK |
+		   BIT(port);
+	u32 vlan_res_off = A5PSW_VLAN_RES(vlan_res_id);
+	u32 val = A5PSW_VLAN_RES_WR_TAGMASK, reg;
+
+	if (set)
+		val |= BIT(port);
+
+	/* Toggle tag mask read */
+	a5psw_reg_writel(a5psw, vlan_res_off, A5PSW_VLAN_RES_RD_TAGMASK);
+	reg = a5psw_reg_readl(a5psw, vlan_res_off);
+	a5psw_reg_writel(a5psw, vlan_res_off, A5PSW_VLAN_RES_RD_TAGMASK);
+
+	reg &= ~mask;
+	reg |= val;
+	a5psw_reg_writel(a5psw, vlan_res_off, reg);
+}
+
+static void a5psw_port_vlan_cfg(struct a5psw *a5psw, int vlan_res_id, int port,
+				bool set)
+{
+	u32 mask = A5PSW_VLAN_RES_WR_TAGMASK | BIT(port);
+	u32 reg = A5PSW_VLAN_RES_WR_PORTMASK;
+
+	if (set)
+		reg |= BIT(port);
+
+	a5psw_reg_rmw(a5psw, A5PSW_VLAN_RES(vlan_res_id), mask, reg);
+}
+
+static int a5psw_port_vlan_add(struct dsa_switch *ds, int port,
+			       const struct switchdev_obj_port_vlan *vlan,
+			       struct netlink_ext_ack *extack)
+{
+	bool tagged = !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
+	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+	struct a5psw *a5psw = ds->priv;
+	u16 vid = vlan->vid;
+	int vlan_res_id;
+
+	dev_dbg(a5psw->dev, "Add VLAN %d on port %d, %s, %s\n",
+		vid, port, tagged ? "tagged" : "untagged",
+		pvid ? "PVID" : "no PVID");
+
+	vlan_res_id = a5psw_find_vlan_entry(a5psw, vid);
+	if (vlan_res_id < 0) {
+		vlan_res_id = a5psw_get_vlan_res_entry(a5psw, vid);
+		if (vlan_res_id < 0)
+			return -EINVAL;
+	}
+
+	a5psw_port_vlan_cfg(a5psw, vlan_res_id, port, true);
+	if (tagged)
+		a5psw_port_vlan_tagged_cfg(a5psw, vlan_res_id, port, true);
+
+	if (pvid) {
+		a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE_ENA, BIT(port),
+			      BIT(port));
+		a5psw_reg_writel(a5psw, A5PSW_SYSTEM_TAGINFO(port), vid);
+	}
+
+	return 0;
+}
+
+static int a5psw_port_vlan_del(struct dsa_switch *ds, int port,
+			       const struct switchdev_obj_port_vlan *vlan)
+{
+	struct a5psw *a5psw = ds->priv;
+	u16 vid = vlan->vid;
+	int vlan_res_id;
+
+	dev_dbg(a5psw->dev, "Removing VLAN %d on port %d\n", vid, port);
+
+	vlan_res_id = a5psw_find_vlan_entry(a5psw, vid);
+	if (vlan_res_id < 0)
+		return -EINVAL;
+
+	a5psw_port_vlan_cfg(a5psw, vlan_res_id, port, false);
+	a5psw_port_vlan_tagged_cfg(a5psw, vlan_res_id, port, false);
+
+	/* Disable PVID if the vid is matching the port one */
+	if (vid == a5psw_reg_readl(a5psw, A5PSW_SYSTEM_TAGINFO(port)))
+		a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE_ENA, BIT(port), 0);
+
+	return 0;
+}
+
 static u64 a5psw_read_stat(struct a5psw *a5psw, u32 offset, int port)
 {
 	u32 reg_lo, reg_hi;
@@ -700,6 +841,27 @@ static void a5psw_get_eth_ctrl_stats(struct dsa_switch *ds, int port,
 	ctrl_stats->MACControlFramesReceived = stat;
 }
 
+static void a5psw_vlan_setup(struct a5psw *a5psw, int port)
+{
+	u32 reg;
+
+	/* Enable TAG always mode for the port, this is actually controlled
+	 * by VLAN_IN_MODE_ENA field which will be used for PVID insertion
+	 */
+	reg = A5PSW_VLAN_IN_MODE_TAG_ALWAYS;
+	reg <<= A5PSW_VLAN_IN_MODE_PORT_SHIFT(port);
+	a5psw_reg_rmw(a5psw, A5PSW_VLAN_IN_MODE, A5PSW_VLAN_IN_MODE_PORT(port),
+		      reg);
+
+	/* Set transparent mode for output frame manipulation, this will depend
+	 * on the VLAN_RES configuration mode
+	 */
+	reg = A5PSW_VLAN_OUT_MODE_TRANSPARENT;
+	reg <<= A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port);
+	a5psw_reg_rmw(a5psw, A5PSW_VLAN_OUT_MODE,
+		      A5PSW_VLAN_OUT_MODE_PORT(port), reg);
+}
+
 static int a5psw_setup(struct dsa_switch *ds)
 {
 	struct a5psw *a5psw = ds->priv;
@@ -772,6 +934,8 @@ static int a5psw_setup(struct dsa_switch *ds)
 		/* Enable management forward only for user ports */
 		if (dsa_port_is_user(dp))
 			a5psw_port_mgmtfwd_set(a5psw, port, true);
+
+		a5psw_vlan_setup(a5psw, port);
 	}
 
 	return 0;
@@ -801,6 +965,9 @@ static const struct dsa_switch_ops a5psw_switch_ops = {
 	.port_bridge_flags = a5psw_port_bridge_flags,
 	.port_stp_state_set = a5psw_port_stp_state_set,
 	.port_fast_age = a5psw_port_fast_age,
+	.port_vlan_filtering = a5psw_port_vlan_filtering,
+	.port_vlan_add = a5psw_port_vlan_add,
+	.port_vlan_del = a5psw_port_vlan_del,
 	.port_fdb_add = a5psw_port_fdb_add,
 	.port_fdb_del = a5psw_port_fdb_del,
 	.port_fdb_dump = a5psw_port_fdb_dump,
diff --git a/drivers/net/dsa/rzn1_a5psw.h b/drivers/net/dsa/rzn1_a5psw.h
index c67abd49c013..2bad2e3edc2a 100644
--- a/drivers/net/dsa/rzn1_a5psw.h
+++ b/drivers/net/dsa/rzn1_a5psw.h
@@ -50,7 +50,9 @@
 #define A5PSW_VLAN_IN_MODE_TAG_ALWAYS		0x2
 
 #define A5PSW_VLAN_OUT_MODE		0x2C
-#define A5PSW_VLAN_OUT_MODE_PORT(port)	(GENMASK(1, 0) << ((port) * 2))
+#define A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port)	((port) * 2)
+#define A5PSW_VLAN_OUT_MODE_PORT(port)	(GENMASK(1, 0) << \
+					A5PSW_VLAN_OUT_MODE_PORT_SHIFT(port))
 #define A5PSW_VLAN_OUT_MODE_DIS		0x0
 #define A5PSW_VLAN_OUT_MODE_STRIP	0x1
 #define A5PSW_VLAN_OUT_MODE_TAG_THROUGH	0x2
@@ -59,7 +61,7 @@
 #define A5PSW_VLAN_IN_MODE_ENA		0x30
 #define A5PSW_VLAN_TAG_ID		0x34
 
-#define A5PSW_SYSTEM_TAGINFO(port)	(0x200 + A5PSW_PORT_OFFSET(port))
+#define A5PSW_SYSTEM_TAGINFO(port)	(0x200 + 4 * (port))
 
 #define A5PSW_AUTH_PORT(port)		(0x240 + 4 * (port))
 #define A5PSW_AUTH_PORT_AUTHORIZED	BIT(0)
@@ -68,7 +70,7 @@
 #define A5PSW_VLAN_RES_WR_PORTMASK	BIT(30)
 #define A5PSW_VLAN_RES_WR_TAGMASK	BIT(29)
 #define A5PSW_VLAN_RES_RD_TAGMASK	BIT(28)
-#define A5PSW_VLAN_RES_ID		GENMASK(16, 5)
+#define A5PSW_VLAN_RES_VLANID		GENMASK(16, 5)
 #define A5PSW_VLAN_RES_PORTMASK		GENMASK(4, 0)
 
 #define A5PSW_RXMATCH_CONFIG(port)	(0x3e80 + 4 * (port))
-- 
2.39.0

Re: [PATCH 3/3] net: dsa: rzn1-a5psw: add vlan support

[Simon Horman]

On Wed, Feb 08, 2023 at 05:04:53PM +0100, Clément Léger wrote:
> Add support for vlan operation (add, del, filtering) on the RZN1
> driver. The a5psw switch supports up to 32 VLAN IDs with filtering,
> tagged/untagged VLANs and PVID for each ports.
> 
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> ---
>  drivers/net/dsa/rzn1_a5psw.c | 167 +++++++++++++++++++++++++++++++++++
>  drivers/net/dsa/rzn1_a5psw.h |   8 +-
>  2 files changed, 172 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
> index 0ce3948952db..de6b18ec647d 100644
> --- a/drivers/net/dsa/rzn1_a5psw.c
> +++ b/drivers/net/dsa/rzn1_a5psw.c
> @@ -583,6 +583,147 @@ static int a5psw_port_fdb_dump(struct dsa_switch *ds, int port,
>  	return ret;
>  }
>  
> +static int a5psw_port_vlan_filtering(struct dsa_switch *ds, int port,
> +				     bool vlan_filtering,
> +				     struct netlink_ext_ack *extack)
> +{
> +	u32 mask = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
> +		   BIT(port + A5PSW_VLAN_DISC_SHIFT);
> +	struct a5psw *a5psw = ds->priv;
> +	u32 val = 0;
> +
> +	if (vlan_filtering)
> +		val = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
> +		      BIT(port + A5PSW_VLAN_DISC_SHIFT);

nit: could this be expressed as follows?

	val = vlan_filtering ? mask : 0 ?

> +
> +	a5psw_reg_rmw(a5psw, A5PSW_VLAN_VERIFY, mask, val);
> +
> +	return 0;
> +}

...

Re: [PATCH 3/3] net: dsa: rzn1-a5psw: add vlan support

[Clément Léger]

Le Thu, 9 Feb 2023 11:38:04 +0100,
Simon Horman <simon.horman@corigine.com> a écrit :

> On Wed, Feb 08, 2023 at 05:04:53PM +0100, Clément Léger wrote:
> > Add support for vlan operation (add, del, filtering) on the RZN1
> > driver. The a5psw switch supports up to 32 VLAN IDs with filtering,
> > tagged/untagged VLANs and PVID for each ports.
> > 
> > Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> > ---
> >  drivers/net/dsa/rzn1_a5psw.c | 167 +++++++++++++++++++++++++++++++++++
> >  drivers/net/dsa/rzn1_a5psw.h |   8 +-
> >  2 files changed, 172 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
> > index 0ce3948952db..de6b18ec647d 100644
> > --- a/drivers/net/dsa/rzn1_a5psw.c
> > +++ b/drivers/net/dsa/rzn1_a5psw.c
> > @@ -583,6 +583,147 @@ static int a5psw_port_fdb_dump(struct dsa_switch *ds, int port,
> >  	return ret;
> >  }
> >  
> > +static int a5psw_port_vlan_filtering(struct dsa_switch *ds, int port,
> > +				     bool vlan_filtering,
> > +				     struct netlink_ext_ack *extack)
> > +{
> > +	u32 mask = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
> > +		   BIT(port + A5PSW_VLAN_DISC_SHIFT);
> > +	struct a5psw *a5psw = ds->priv;
> > +	u32 val = 0;
> > +
> > +	if (vlan_filtering)
> > +		val = BIT(port + A5PSW_VLAN_VERI_SHIFT) |
> > +		      BIT(port + A5PSW_VLAN_DISC_SHIFT);  
> 
> nit: could this be expressed as follows?
> 
> 	val = vlan_filtering ? mask : 0 ?

Yes clearly looks more concise.

Thanks,

> 
> > +
> > +	a5psw_reg_rmw(a5psw, A5PSW_VLAN_VERIFY, mask, val);
> > +
> > +	return 0;
> > +}  
> 
> ...



-- 
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com