Re: [PATCH RFC] linux: net: phy: realtek: changing LED behaviour for RTL8211F

[Oliver Graute <oliver.graute@kococonnector.com>]

On 09/02/23, Simon Horman wrote:
> On Thu, Feb 09, 2023 at 10:44:05AM +0100, Oliver Graute wrote:
> > This enable the LEDs for network activity and 100/1000Link for the RTL8211F
> > 
> > Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
> > ---
> >  drivers/net/phy/realtek.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> > index 3d99fd6664d7..5c796883cad3 100644
> > --- a/drivers/net/phy/realtek.c
> > +++ b/drivers/net/phy/realtek.c
> > @@ -416,6 +416,11 @@ static int rtl8211f_config_init(struct phy_device *phydev)
> >  		}
> >  	}
> >  
> > +        phy_write(phydev, RTL821x_PAGE_SELECT, 0xd04);
> > +        phy_write(phydev, 0x10, 0x15B);
> > +
> > +        phy_write(phydev, RTL821x_PAGE_SELECT, 0x0);
> > +
> 
> nit: it looks like the indentation in the new lines above should
>      be using a single tab rather than 8 spaces.

thx, I will fix the indentation. 

is this the right place to turn on the realtek phy LEDs for RTL8211F?

Best regards,

Oliver