From: Eric Dumazet <edumazet@google.com>
To: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: David Ahern <dsahern@kernel.org>,
netdev@vger.kernel.org, eric.dumazet@gmail.com,
Eric Dumazet <edumazet@google.com>
Subject: [PATCH net-next 1/8] ipv6: icmp6: add drop reason support to ndisc_recv_ns()
Date: Thu, 16 Feb 2023 16:28:35 +0000 [thread overview]
Message-ID: <20230216162842.1633734-2-edumazet@google.com> (raw)
In-Reply-To: <20230216162842.1633734-1-edumazet@google.com>
Change ndisc_recv_ns() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
---
net/ipv6/ndisc.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 9548b5a44714f98975a8b7194bc81cbb0f72697f..039722f83c668ad59eb63ffde98e18ad8947bdcc 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -783,7 +783,7 @@ void ndisc_update(const struct net_device *dev, struct neighbour *neigh,
ndisc_ops_update(dev, neigh, flags, icmp6_type, ndopts);
}
-static void ndisc_recv_ns(struct sk_buff *skb)
+static enum skb_drop_reason ndisc_recv_ns(struct sk_buff *skb)
{
struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
const struct in6_addr *saddr = &ipv6_hdr(skb)->saddr;
@@ -797,18 +797,17 @@ static void ndisc_recv_ns(struct sk_buff *skb)
struct inet6_dev *idev = NULL;
struct neighbour *neigh;
int dad = ipv6_addr_any(saddr);
- bool inc;
int is_router = -1;
+ SKB_DR(reason);
u64 nonce = 0;
+ bool inc;
- if (skb->len < sizeof(struct nd_msg)) {
- ND_PRINTK(2, warn, "NS: packet too short\n");
- return;
- }
+ if (skb->len < sizeof(struct nd_msg))
+ return SKB_DROP_REASON_PKT_TOO_SMALL;
if (ipv6_addr_is_multicast(&msg->target)) {
ND_PRINTK(2, warn, "NS: multicast target address\n");
- return;
+ return reason;
}
/*
@@ -817,12 +816,12 @@ static void ndisc_recv_ns(struct sk_buff *skb)
*/
if (dad && !ipv6_addr_is_solict_mult(daddr)) {
ND_PRINTK(2, warn, "NS: bad DAD packet (wrong destination)\n");
- return;
+ return reason;
}
if (!ndisc_parse_options(dev, msg->opt, ndoptlen, &ndopts)) {
ND_PRINTK(2, warn, "NS: invalid ND options\n");
- return;
+ return reason;
}
if (ndopts.nd_opts_src_lladdr) {
@@ -830,7 +829,7 @@ static void ndisc_recv_ns(struct sk_buff *skb)
if (!lladdr) {
ND_PRINTK(2, warn,
"NS: invalid link-layer address length\n");
- return;
+ return reason;
}
/* RFC2461 7.1.1:
@@ -841,7 +840,7 @@ static void ndisc_recv_ns(struct sk_buff *skb)
if (dad) {
ND_PRINTK(2, warn,
"NS: bad DAD packet (link-layer address option)\n");
- return;
+ return reason;
}
}
if (ndopts.nd_opts_nonce && ndopts.nd_opts_nonce->nd_opt_len == 1)
@@ -869,7 +868,7 @@ static void ndisc_recv_ns(struct sk_buff *skb)
* so fail our DAD process
*/
addrconf_dad_failure(skb, ifp);
- return;
+ return reason;
} else {
/*
* This is not a dad solicitation.
@@ -901,7 +900,7 @@ static void ndisc_recv_ns(struct sk_buff *skb)
idev = in6_dev_get(dev);
if (!idev) {
/* XXX: count this drop? */
- return;
+ return reason;
}
if (ipv6_chk_acast_addr(net, dev, &msg->target) ||
@@ -958,6 +957,7 @@ static void ndisc_recv_ns(struct sk_buff *skb)
true, (ifp != NULL && inc), inc);
if (neigh)
neigh_release(neigh);
+ reason = SKB_CONSUMED;
}
out:
@@ -965,6 +965,7 @@ static void ndisc_recv_ns(struct sk_buff *skb)
in6_ifa_put(ifp);
else
in6_dev_put(idev);
+ return reason;
}
static int accept_untracked_na(struct net_device *dev, struct in6_addr *saddr)
@@ -1781,8 +1782,9 @@ void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target)
static void pndisc_redo(struct sk_buff *skb)
{
- ndisc_recv_ns(skb);
- kfree_skb(skb);
+ enum skb_drop_reason reason = ndisc_recv_ns(skb);
+
+ kfree_skb_reason(skb, reason);
}
static int ndisc_is_multicast(const void *pkey)
@@ -1834,7 +1836,7 @@ enum skb_drop_reason ndisc_rcv(struct sk_buff *skb)
switch (msg->icmph.icmp6_type) {
case NDISC_NEIGHBOUR_SOLICITATION:
memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
- ndisc_recv_ns(skb);
+ reason = ndisc_recv_ns(skb);
break;
case NDISC_NEIGHBOUR_ADVERTISEMENT:
--
2.39.1.581.gbfd45094c4-goog
next prev parent reply other threads:[~2023-02-16 16:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-16 16:28 [PATCH net-next 0/8] ipv6: icmp6: better drop reason support Eric Dumazet
2023-02-16 16:28 ` Eric Dumazet [this message]
2023-02-16 16:28 ` [PATCH net-next 2/8] ipv6: icmp6: add drop reason support to ndisc_recv_na() Eric Dumazet
2023-02-16 16:28 ` [PATCH net-next 3/8] ipv6: icmp6: add drop reason support to ndisc_recv_rs() Eric Dumazet
2023-02-16 16:28 ` [PATCH net-next 4/8] ipv6: icmp6: add drop reason support to ndisc_router_discovery() Eric Dumazet
2023-02-16 16:28 ` [PATCH net-next 5/8] ipv6: icmp6: add drop reason support to ndisc_redirect_rcv() Eric Dumazet
2023-02-16 16:28 ` [PATCH net-next 6/8] ipv6: icmp6: add SKB_DROP_REASON_IPV6_NDISC_BAD_OPTIONS Eric Dumazet
2023-02-16 16:28 ` [PATCH net-next 7/8] ipv6: icmp6: add SKB_DROP_REASON_IPV6_NDISC_NS_OTHERHOST Eric Dumazet
2023-02-16 16:28 ` [PATCH net-next 8/8] ipv6: icmp6: add drop reason support to icmpv6_echo_reply() Eric Dumazet
2023-02-20 9:00 ` [PATCH net-next 0/8] ipv6: icmp6: better drop reason support patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230216162842.1633734-2-edumazet@google.com \
--to=edumazet@google.com \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=eric.dumazet@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).