From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Jamal Hadi Salim <jhs@mojatatu.com>,
Cong Wang <xiyou.wangcong@gmail.com>,
Jiri Pirko <jiri@resnulli.us>,
Vinicius Costa Gomes <vinicius.gomes@intel.com>,
Kurt Kanzenbach <kurt@linutronix.de>,
Gerhard Engleder <gerhard@engleder-embedded.com>,
Amritha Nambiar <amritha.nambiar@intel.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Ferenc Fejes <ferenc.fejes@ericsson.com>,
Xiaoliang Yang <xiaoliang.yang_1@nxp.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next 02/12] net: mscc: ocelot: add support for mqprio offload
Date: Fri, 17 Feb 2023 01:21:16 +0200 [thread overview]
Message-ID: <20230216232126.3402975-3-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20230216232126.3402975-1-vladimir.oltean@nxp.com>
This doesn't apply anything to hardware and in general doesn't do
anything that the software variant doesn't do, except for checking that
there isn't more than 1 TXQ per TC (TXQs for a DSA switch are a dubious
concept anyway). The reason we add this is to be able to parse one more
field added to struct tc_mqprio_qopt_offload, namely preemptible_tcs.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/net/dsa/ocelot/felix_vsc9959.c | 9 +++++
drivers/net/ethernet/mscc/ocelot.c | 48 ++++++++++++++++++++++++++
include/soc/mscc/ocelot.h | 4 +++
3 files changed, 61 insertions(+)
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 354aa3dbfde7..3df71444dde1 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1612,6 +1612,13 @@ static int vsc9959_qos_port_cbs_set(struct dsa_switch *ds, int port,
static int vsc9959_qos_query_caps(struct tc_query_caps_base *base)
{
switch (base->type) {
+ case TC_SETUP_QDISC_MQPRIO: {
+ struct tc_mqprio_caps *caps = base->caps;
+
+ caps->validate_queue_counts = true;
+
+ return 0;
+ }
case TC_SETUP_QDISC_TAPRIO: {
struct tc_taprio_caps *caps = base->caps;
@@ -1635,6 +1642,8 @@ static int vsc9959_port_setup_tc(struct dsa_switch *ds, int port,
return vsc9959_qos_query_caps(type_data);
case TC_SETUP_QDISC_TAPRIO:
return vsc9959_qos_port_tas_set(ocelot, port, type_data);
+ case TC_SETUP_QDISC_MQPRIO:
+ return ocelot_port_mqprio(ocelot, port, type_data);
case TC_SETUP_QDISC_CBS:
return vsc9959_qos_port_cbs_set(ds, port, type_data);
default:
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 08acb7b89086..20557a9c46e6 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -7,6 +7,7 @@
#include <linux/dsa/ocelot.h>
#include <linux/if_bridge.h>
#include <linux/iopoll.h>
+#include <net/pkt_sched.h>
#include <soc/mscc/ocelot_vcap.h>
#include "ocelot.h"
#include "ocelot_vcap.h"
@@ -2602,6 +2603,53 @@ void ocelot_port_mirror_del(struct ocelot *ocelot, int from, bool ingress)
}
EXPORT_SYMBOL_GPL(ocelot_port_mirror_del);
+static void ocelot_port_reset_mqprio(struct ocelot *ocelot, int port)
+{
+ struct net_device *dev = ocelot->ops->port_to_netdev(ocelot, port);
+
+ netdev_reset_tc(dev);
+}
+
+int ocelot_port_mqprio(struct ocelot *ocelot, int port,
+ struct tc_mqprio_qopt_offload *mqprio)
+{
+ struct net_device *dev = ocelot->ops->port_to_netdev(ocelot, port);
+ struct tc_mqprio_qopt *qopt = &mqprio->qopt;
+ int num_tc = qopt->num_tc;
+ int tc, err;
+
+ if (!num_tc) {
+ ocelot_port_reset_mqprio(ocelot, port);
+ return 0;
+ }
+
+ err = netdev_set_num_tc(dev, num_tc);
+ if (err)
+ return err;
+
+ for (tc = 0; tc < num_tc; tc++) {
+ if (qopt->count[tc] != 1) {
+ netdev_err(dev, "Only one TXQ per TC supported\n");
+ return -EINVAL;
+ }
+
+ err = netdev_set_tc_queue(dev, tc, 1, qopt->offset[tc]);
+ if (err)
+ goto err_reset_tc;
+ }
+
+ err = netif_set_real_num_tx_queues(dev, num_tc);
+ if (err)
+ goto err_reset_tc;
+
+ return 0;
+
+err_reset_tc:
+ ocelot_port_reset_mqprio(ocelot, port);
+ return err;
+}
+EXPORT_SYMBOL_GPL(ocelot_port_mqprio);
+
void ocelot_init_port(struct ocelot *ocelot, int port)
{
struct ocelot_port *ocelot_port = ocelot->ports[port];
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 2080879e4134..27ff770a6c53 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -11,6 +11,8 @@
#include <linux/regmap.h>
#include <net/dsa.h>
+struct tc_mqprio_qopt_offload;
+
/* Port Group IDs (PGID) are masks of destination ports.
*
* For L2 forwarding, the switch performs 3 lookups in the PGID table for each
@@ -1145,6 +1147,8 @@ int ocelot_port_set_mm(struct ocelot *ocelot, int port,
struct netlink_ext_ack *extack);
int ocelot_port_get_mm(struct ocelot *ocelot, int port,
struct ethtool_mm_state *state);
+int ocelot_port_mqprio(struct ocelot *ocelot, int port,
+ struct tc_mqprio_qopt_offload *mqprio);
#if IS_ENABLED(CONFIG_BRIDGE_MRP)
int ocelot_mrp_add(struct ocelot *ocelot, int port,
--
2.34.1
next prev parent reply other threads:[~2023-02-16 23:21 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-16 23:21 [PATCH net-next 00/12] Add tc-mqprio and tc-taprio support for preemptible traffic classes Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 01/12] net: enetc: rename "mqprio" to "qopt" Vladimir Oltean
2023-02-16 23:21 ` Vladimir Oltean [this message]
2023-02-16 23:21 ` [PATCH net-next 03/12] net: dsa: felix: act upon the mqprio qopt in taprio offload Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 04/12] net: ethtool: fix __ethtool_dev_mm_supported() implementation Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 05/12] net: ethtool: create and export ethtool_dev_mm_supported() Vladimir Oltean
2023-02-17 13:00 ` Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 06/12] net/sched: mqprio: simplify handling of nlattr portion of TCA_OPTIONS Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 07/12] net/sched: mqprio: add extack to mqprio_parse_nlattr() Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 08/12] net/sched: mqprio: add an extack message to mqprio_parse_opt() Vladimir Oltean
2023-02-17 7:24 ` Ferenc Fejes
2023-02-20 10:47 ` Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 09/12] net/sched: mqprio: allow per-TC user input of FP adminStatus Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 10/12] net/sched: taprio: " Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 11/12] net: mscc: ocelot: add support for preemptible traffic classes Vladimir Oltean
2023-02-16 23:21 ` [PATCH net-next 12/12] net: enetc: " Vladimir Oltean
2023-02-18 15:20 ` [PATCH net-next 00/12] Add tc-mqprio and tc-taprio " Vladimir Oltean
2023-02-19 9:47 ` Ferenc Fejes
2023-02-19 12:58 ` Vladimir Oltean
2023-02-20 8:11 ` Ferenc Fejes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230216232126.3402975-3-vladimir.oltean@nxp.com \
--to=vladimir.oltean@nxp.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=amritha.nambiar@intel.com \
--cc=andrew@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=ferenc.fejes@ericsson.com \
--cc=gerhard@engleder-embedded.com \
--cc=jhs@mojatatu.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=kurt@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=vinicius.gomes@intel.com \
--cc=xiaoliang.yang_1@nxp.com \
--cc=xiyou.wangcong@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox