From: Lukasz Majewski <lukma@denx.de>
To: Andrew Lunn <andrew@lunn.ch>
Cc: "Russell King (Oracle)" <linux@armlinux.org.uk>,
Vladimir Oltean <olteanv@gmail.com>,
Eric Dumazet <edumazet@google.com>,
Florian Fainelli <f.fainelli@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Alexander Duyck <alexander.duyck@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/7] dsa: marvell: Correct value of max_frame_size variable after validation
Date: Fri, 10 Mar 2023 12:53:46 +0100 [thread overview]
Message-ID: <20230310125346.13f93f78@wsk> (raw)
In-Reply-To: <0959097a-35cb-48c1-8e88-5e6c1269852d@lunn.ch>
[-- Attachment #1: Type: text/plain, Size: 1815 bytes --]
Hi Andrew,
> > > If I understand this correctly, in patch 4, you add a call to the
> > > 6250 family to call mv88e6185_g1_set_max_frame_size(), which sets
> > > a bit called MV88E6185_G1_CTL1_MAX_FRAME_1632 if the frame size
> > > is larger than 1518.
> >
> > Yes, correct.
> >
> > >
> > > However, you're saying that 6250 has a frame size of 2048. That's
> > > fine, but it makes MV88E6185_G1_CTL1_MAX_FRAME_1632 rather
> > > misleading as a definition. While the bit may increase the frame
> > > size, I think if we're going to do this, then this definition
> > > ought to be renamed.
> >
> > I thought about rename, but then I've double checked; register
> > offset and exact bit definition is the same as for 6185, so to avoid
> > unnecessary code duplication - I've reused the existing function.
> >
> > Maybe comment would be just enough?
>
> The driver takes care with its namespace in order to add per switch
> family defines. So you can add MV88E6250_G1_CTL1_MAX_FRAME_2048. It
> does not matter if it is the same bit. You can also add a
> mv88e6250_g1_set_max_frame_size() and it also does not matter if it is
> in effect the same as mv88e6185_g1_set_max_frame_size().
>
> We should always make the driver understandably first, compact and
> without redundancy second. We are then less likely to get into
> situations like this again where it is not clear what MTU a device
> actually supports because the code is cryptic.
Ok, I will add new function.
Thanks for hints.
>
> Andrew
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2023-03-10 11:54 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-09 12:54 [PATCH 0/7] dsa: marvell: Add support for mv88e6071 and 6020 switches Lukasz Majewski
2023-03-09 12:54 ` [PATCH 1/7] dsa: marvell: Provide per device information about max frame size Lukasz Majewski
2023-03-10 12:02 ` Vladimir Oltean
2023-03-10 12:25 ` Russell King (Oracle)
2023-03-10 13:04 ` Vladimir Oltean
2023-03-10 13:06 ` Vladimir Oltean
2023-03-10 13:17 ` Lukasz Majewski
2023-03-10 13:36 ` Vladimir Oltean
2023-03-10 14:10 ` Lukasz Majewski
2023-03-10 15:45 ` Vladimir Oltean
2023-03-10 16:12 ` Andrew Lunn
2023-03-12 15:55 ` Lukasz Majewski
2023-03-13 15:01 ` Vladimir Oltean
2023-03-10 14:04 ` Russell King (Oracle)
2023-03-09 12:54 ` [PATCH 2/7] net: dsa: mv88e6xxx: add support for MV88E6020 switch Lukasz Majewski
2023-03-10 14:23 ` Vladimir Oltean
2023-03-09 12:54 ` [PATCH 3/7] net: dsa: mv88e6xxx: add support for MV88E6071 switch Lukasz Majewski
2023-03-09 12:54 ` [PATCH 4/7] dsa: marvell: Define .set_max_frame_size() function for mv88e6250 SoC family Lukasz Majewski
2023-03-09 12:54 ` [PATCH 5/7] dsa: marvell: Add helper function to validate the max_frame_size variable Lukasz Majewski
2023-03-09 13:21 ` Russell King (Oracle)
2023-03-09 13:26 ` Russell King (Oracle)
2023-03-09 13:47 ` Lukasz Majewski
2023-03-09 13:52 ` Vladimir Oltean
2023-03-09 13:57 ` Lukasz Majewski
2023-03-09 12:54 ` [PATCH 6/7] dsa: marvell: Correct value of max_frame_size variable after validation Lukasz Majewski
2023-03-09 14:05 ` Russell King (Oracle)
2023-03-09 14:43 ` Lukasz Majewski
2023-03-09 15:31 ` Russell King (Oracle)
2023-03-10 9:47 ` Lukasz Majewski
2023-03-09 15:42 ` Andrew Lunn
2023-03-10 11:53 ` Lukasz Majewski [this message]
2023-03-10 12:06 ` Russell King (Oracle)
2023-03-10 13:19 ` Lukasz Majewski
2023-03-10 15:25 ` Vladimir Oltean
2023-03-09 12:54 ` [PATCH 7/7] dsa: marvell: Modify get max MTU callback to use per switch provided value Lukasz Majewski
2023-04-03 11:55 ` [PATCH 0/7] dsa: marvell: Add support for mv88e6071 and 6020 switches Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230310125346.13f93f78@wsk \
--to=lukma@denx.de \
--cc=alexander.duyck@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).