From: Andrew Lunn <andrew@lunn.ch>
To: netdev <netdev@vger.kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <rmk+kernel@armlinux.org.uk>,
Oleksij Rempel <linux@rempel-privat.de>,
Andrew Lunn <andrew@lunn.ch>
Subject: [RFC/RFTv3 20/24] net: phy: Add phy_support_eee() indicating MAC support EEE
Date: Fri, 31 Mar 2023 02:55:14 +0200 [thread overview]
Message-ID: <20230331005518.2134652-21-andrew@lunn.ch> (raw)
In-Reply-To: <20230331005518.2134652-1-andrew@lunn.ch>
In order for EEE to operate, both the MAC and the PHY need to support
it, similar to how pause works. Copy the pause concept and add the
call phy_support_eee() which the MAC makes after connecting the PHY to
indicate it supports EEE. phylib will then advertise EEE when auto-neg
is performed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/phy/phy_device.c | 16 ++++++++++++++++
include/linux/phy.h | 3 ++-
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index c0760cbf534b..30f07623637b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2760,6 +2760,22 @@ void phy_advertise_supported(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_advertise_supported);
+/**
+ * phy_support_eee - Enable support of EEE
+ * @phydev: target phy_device struct
+ *
+ * Description: Called by the MAC to indicate is supports Energy
+ * Efficient Ethernet. This should be called before phy_start() in
+ * order that EEE is negotiated when the link comes up as part of
+ * phy_start().
+ */
+void phy_support_eee(struct phy_device *phydev)
+{
+ linkmode_copy(phydev->advertising_eee, phydev->supported_eee);
+ phydev->tx_lpi_enabled = true;
+}
+EXPORT_SYMBOL(phy_support_eee);
+
/**
* phy_support_sym_pause - Enable support of symmetrical pause
* @phydev: target phy_device struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index af199fcc52b2..85f66c905fef 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -683,7 +683,7 @@ struct phy_device {
__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
/* used with phy_speed_down */
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old);
- /* used for eee validation */
+ /* used for eee validation and configuration*/
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported_eee);
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising_eee);
bool eee_enabled;
@@ -1824,6 +1824,7 @@ void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode);
void phy_advertise_supported(struct phy_device *phydev);
void phy_support_sym_pause(struct phy_device *phydev);
void phy_support_asym_pause(struct phy_device *phydev);
+void phy_support_eee(struct phy_device *phydev);
void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
bool autoneg);
void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
--
2.40.0
next prev parent reply other threads:[~2023-03-31 0:55 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-31 0:54 [RFC/RFTv3 00/24] net: ethernet: Rework EEE Andrew Lunn
2023-03-31 0:54 ` [RFC/RFTv3 01/24] net: phy: Add phydev->eee_active to simplify adjust link callbacks Andrew Lunn
2023-05-30 17:51 ` Florian Fainelli
2023-03-31 0:54 ` [RFC/RFTv3 02/24] net: phylink: Add mac_set_eee() callback Andrew Lunn
2023-03-31 0:54 ` [RFC/RFTv3 03/24] net: phy: Add helper to set EEE Clock stop enable bit Andrew Lunn
2023-03-31 0:54 ` [RFC/RFTv3 04/24] net: phy: Keep track of EEE tx_lpi_enabled Andrew Lunn
2023-05-30 18:11 ` Florian Fainelli
2023-05-30 18:14 ` Russell King (Oracle)
2023-03-31 0:54 ` [RFC/RFTv3 05/24] net: phy: Immediately call adjust_link if only tx_lpi_enabled changes Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 06/24] net: phylink: Handle change in EEE from phylib Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 07/24] net: marvell: mvneta: Simplify EEE configuration Andrew Lunn
2023-05-30 18:03 ` Florian Fainelli
2023-03-31 0:55 ` [RFC/RFTv3 08/24] net: stmmac: Drop usage of phy_init_eee() Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 09/24] net: stmmac: Simplify ethtool get eee Andrew Lunn
2023-05-19 7:11 ` Oleksij Rempel
2023-03-31 0:55 ` [RFC/RFTv3 10/24] net: lan743x: Fixup EEE Andrew Lunn
2023-05-30 18:03 ` Florian Fainelli
2023-03-31 0:55 ` [RFC/RFTv3 11/24] net: fec: Move fec_enet_eee_mode_set() and helper earlier Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 12/24] net: FEC: Fixup EEE Andrew Lunn
2023-05-19 10:27 ` Oleksij Rempel
2023-03-31 0:55 ` [RFC/RFTv3 13/24] net: genet: " Andrew Lunn
2023-05-30 18:01 ` Florian Fainelli
2023-03-31 0:55 ` [RFC/RFTv3 14/24] net: sxgdb: " Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 15/24] net: dsa: mt7530: Swap to using phydev->eee_active Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 16/24] net: dsa: b53: " Andrew Lunn
2023-05-30 18:05 ` Florian Fainelli
2023-03-31 0:55 ` [RFC/RFTv3 17/24] net: phylink: Remove unused phylink_init_eee() Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 18/24] net: phy: remove unused phy_init_eee() Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 19/24] net: usb: lan78xx: Fixup EEE Andrew Lunn
2023-03-31 0:55 ` Andrew Lunn [this message]
2023-05-30 18:16 ` [RFC/RFTv3 20/24] net: phy: Add phy_support_eee() indicating MAC support EEE Florian Fainelli
2023-03-31 0:55 ` [RFC/RFTv3 21/24] net: phylink: Add MAC_EEE to mac_capabilites Andrew Lunn
2023-05-30 18:18 ` Florian Fainelli
2023-03-31 0:55 ` [RFC/RFTv3 22/24] net: phylink: Extend mac_capabilities in MAC drivers which support EEE Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 23/24] net: phylib: call phy_support_eee() " Andrew Lunn
2023-03-31 0:55 ` [RFC/RFTv3 24/24] net: phy: Disable EEE advertisement by default Andrew Lunn
2023-05-26 8:56 ` [RFC/RFTv3 00/24] net: ethernet: Rework EEE Oleksij Rempel
2023-05-26 12:08 ` Andrew Lunn
2023-05-26 16:13 ` Florian Fainelli
2023-05-30 18:31 ` Florian Fainelli
2023-05-30 19:35 ` Russell King (Oracle)
2023-05-30 19:49 ` Russell King (Oracle)
2023-05-31 7:14 ` Oleksij Rempel
2023-05-31 14:41 ` Russell King (Oracle)
2023-05-30 19:48 ` Andrew Lunn
2023-05-30 20:03 ` Florian Fainelli
2023-05-30 20:36 ` Russell King (Oracle)
2023-05-30 20:28 ` Russell King (Oracle)
2023-05-30 23:03 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230331005518.2134652-21-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux@rempel-privat.de \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).