netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: netdev <netdev@vger.kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <rmk+kernel@armlinux.org.uk>,
	Oleksij Rempel <linux@rempel-privat.de>,
	Andrew Lunn <andrew@lunn.ch>
Subject: [RFC/RFTv3 05/24] net: phy: Immediately call adjust_link if only tx_lpi_enabled changes
Date: Fri, 31 Mar 2023 02:54:59 +0200	[thread overview]
Message-ID: <20230331005518.2134652-6-andrew@lunn.ch> (raw)
In-Reply-To: <20230331005518.2134652-1-andrew@lunn.ch>

The MAC driver changes its EEE hardware configuration in its
adjust_link callback. This is called when auto-neg completes. If
set_eee is called with a change to tx_lpi_enabled which does not
trigger an auto-neg, it is necessary to call the adjust_link callback
so that the MAC is reconfigured to take this change into account.

When setting phydev->eee_active, take tx_lpi_enabled into account, so
the MAC drivers don't need to consider tx_lpi_enabled.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
v3: Update phydev->eee_active
---
 drivers/net/phy/phy-c45.c | 11 ++++++++---
 drivers/net/phy/phy.c     | 16 +++++++++++++---
 2 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 29479e142826..a16124668e1d 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -1455,6 +1455,8 @@ EXPORT_SYMBOL(genphy_c45_ethtool_get_eee);
  *
  * Description: it reportes the Supported/Advertisement/LP Advertisement
  * capabilities.
+ * Returns either error code, 0 if there was no change, or positive if
+ * there was a change which triggered auto-neg.
  */
 int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
 			       struct ethtool_eee *data)
@@ -1488,9 +1490,12 @@ int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
 	ret = genphy_c45_an_config_eee_aneg(phydev);
 	if (ret < 0)
 		return ret;
-	if (ret > 0)
-		return phy_restart_aneg(phydev);
-
+	if (ret > 0) {
+		ret = phy_restart_aneg(phydev);
+		if (ret < 0)
+			return ret;
+		return 1;
+	}
 	return 0;
 }
 EXPORT_SYMBOL(genphy_c45_ethtool_set_eee);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c7a5d0240211..f4da7a5440e3 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -918,7 +918,7 @@ static void phy_update_eee_active(struct phy_device *phydev)
 	if (err < 0)
 		phydev->eee_active = false;
 	else
-		phydev->eee_active = err;
+		phydev->eee_active = (err & phydev->tx_lpi_enabled);
 }
 
 /**
@@ -1632,11 +1632,21 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
 
 	mutex_lock(&phydev->lock);
 	ret = genphy_c45_ethtool_set_eee(phydev, data);
-	if (!ret)
+	if (ret >= 0) {
+		if (ret == 0) {
+			/* auto-neg not triggered */
+			if (phydev->tx_lpi_enabled != data->tx_lpi_enabled) {
+				phydev->tx_lpi_enabled = data->tx_lpi_enabled;
+				phy_update_eee_active(phydev);
+				if (phydev->link)
+					phy_link_up(phydev);
+			}
+		}
 		phydev->tx_lpi_enabled = data->tx_lpi_enabled;
+	}
 	mutex_unlock(&phydev->lock);
 
-	return ret;
+	return (ret < 0 ? ret : 0);
 }
 EXPORT_SYMBOL(phy_ethtool_set_eee);
 
-- 
2.40.0


  parent reply	other threads:[~2023-03-31  0:56 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-31  0:54 [RFC/RFTv3 00/24] net: ethernet: Rework EEE Andrew Lunn
2023-03-31  0:54 ` [RFC/RFTv3 01/24] net: phy: Add phydev->eee_active to simplify adjust link callbacks Andrew Lunn
2023-05-30 17:51   ` Florian Fainelli
2023-03-31  0:54 ` [RFC/RFTv3 02/24] net: phylink: Add mac_set_eee() callback Andrew Lunn
2023-03-31  0:54 ` [RFC/RFTv3 03/24] net: phy: Add helper to set EEE Clock stop enable bit Andrew Lunn
2023-03-31  0:54 ` [RFC/RFTv3 04/24] net: phy: Keep track of EEE tx_lpi_enabled Andrew Lunn
2023-05-30 18:11   ` Florian Fainelli
2023-05-30 18:14     ` Russell King (Oracle)
2023-03-31  0:54 ` Andrew Lunn [this message]
2023-03-31  0:55 ` [RFC/RFTv3 06/24] net: phylink: Handle change in EEE from phylib Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 07/24] net: marvell: mvneta: Simplify EEE configuration Andrew Lunn
2023-05-30 18:03   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 08/24] net: stmmac: Drop usage of phy_init_eee() Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 09/24] net: stmmac: Simplify ethtool get eee Andrew Lunn
2023-05-19  7:11   ` Oleksij Rempel
2023-03-31  0:55 ` [RFC/RFTv3 10/24] net: lan743x: Fixup EEE Andrew Lunn
2023-05-30 18:03   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 11/24] net: fec: Move fec_enet_eee_mode_set() and helper earlier Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 12/24] net: FEC: Fixup EEE Andrew Lunn
2023-05-19 10:27   ` Oleksij Rempel
2023-03-31  0:55 ` [RFC/RFTv3 13/24] net: genet: " Andrew Lunn
2023-05-30 18:01   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 14/24] net: sxgdb: " Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 15/24] net: dsa: mt7530: Swap to using phydev->eee_active Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 16/24] net: dsa: b53: " Andrew Lunn
2023-05-30 18:05   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 17/24] net: phylink: Remove unused phylink_init_eee() Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 18/24] net: phy: remove unused phy_init_eee() Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 19/24] net: usb: lan78xx: Fixup EEE Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 20/24] net: phy: Add phy_support_eee() indicating MAC support EEE Andrew Lunn
2023-05-30 18:16   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 21/24] net: phylink: Add MAC_EEE to mac_capabilites Andrew Lunn
2023-05-30 18:18   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 22/24] net: phylink: Extend mac_capabilities in MAC drivers which support EEE Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 23/24] net: phylib: call phy_support_eee() " Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 24/24] net: phy: Disable EEE advertisement by default Andrew Lunn
2023-05-26  8:56 ` [RFC/RFTv3 00/24] net: ethernet: Rework EEE Oleksij Rempel
2023-05-26 12:08   ` Andrew Lunn
2023-05-26 16:13     ` Florian Fainelli
2023-05-30 18:31 ` Florian Fainelli
2023-05-30 19:35   ` Russell King (Oracle)
2023-05-30 19:49     ` Russell King (Oracle)
2023-05-31  7:14       ` Oleksij Rempel
2023-05-31 14:41         ` Russell King (Oracle)
2023-05-30 19:48   ` Andrew Lunn
2023-05-30 20:03     ` Florian Fainelli
2023-05-30 20:36       ` Russell King (Oracle)
2023-05-30 20:28     ` Russell King (Oracle)
2023-05-30 23:03       ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230331005518.2134652-6-andrew@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux@rempel-privat.de \
    --cc=netdev@vger.kernel.org \
    --cc=rmk+kernel@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).