netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: netdev <netdev@vger.kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <rmk+kernel@armlinux.org.uk>,
	Oleksij Rempel <linux@rempel-privat.de>,
	Andrew Lunn <andrew@lunn.ch>
Subject: [RFC/RFTv3 07/24] net: marvell: mvneta: Simplify EEE configuration
Date: Fri, 31 Mar 2023 02:55:01 +0200	[thread overview]
Message-ID: <20230331005518.2134652-8-andrew@lunn.ch> (raw)
In-Reply-To: <20230331005518.2134652-1-andrew@lunn.ch>

phylib already does most of the work. It will track eee_enabled,
eee_active and tx_lpi_enabled and correctly set them in the
ethtool_get_eee callback.

Replace the call to phy_init_eee() by looking at the value of
eee_active passed to the mac_set_eee callback.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
v2: Use eee_active parameter, which is race free.
    Remove handling of tx_lpi_enabled, leave it to phylib.
v3: Add mac_set_eee() callback.
---
 drivers/net/ethernet/marvell/mvneta.c | 26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 0e39d199ff06..fba9edad9e37 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -536,10 +536,6 @@ struct mvneta_port {
 	struct mvneta_bm_pool *pool_short;
 	int bm_win_id;
 
-	bool eee_enabled;
-	bool eee_active;
-	bool tx_lpi_enabled;
-
 	u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
 
 	u32 indir[MVNETA_RSS_LU_TABLE_SIZE];
@@ -4170,7 +4166,6 @@ static void mvneta_mac_link_down(struct phylink_config *config,
 		mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
 	}
 
-	pp->eee_active = false;
 	mvneta_set_eee(pp, false);
 }
 
@@ -4220,11 +4215,15 @@ static void mvneta_mac_link_up(struct phylink_config *config,
 	}
 
 	mvneta_port_up(pp);
+}
 
-	if (phy && pp->eee_enabled) {
-		pp->eee_active = phy_init_eee(phy, false) >= 0;
-		mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled);
-	}
+static void mvneta_mac_set_eee(struct phylink_config *config,
+			       bool eee_active)
+{
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct mvneta_port *pp = netdev_priv(ndev);
+
+	mvneta_set_eee(pp, eee_active);
 }
 
 static const struct phylink_mac_ops mvneta_phylink_ops = {
@@ -4234,6 +4233,7 @@ static const struct phylink_mac_ops mvneta_phylink_ops = {
 	.mac_finish = mvneta_mac_finish,
 	.mac_link_down = mvneta_mac_link_down,
 	.mac_link_up = mvneta_mac_link_up,
+	.mac_set_eee = mvneta_mac_set_eee,
 };
 
 static int mvneta_mdio_probe(struct mvneta_port *pp)
@@ -5028,9 +5028,6 @@ static int mvneta_ethtool_get_eee(struct net_device *dev,
 
 	lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
 
-	eee->eee_enabled = pp->eee_enabled;
-	eee->eee_active = pp->eee_active;
-	eee->tx_lpi_enabled = pp->tx_lpi_enabled;
 	eee->tx_lpi_timer = (lpi_ctl0) >> 8; // * scale;
 
 	return phylink_ethtool_get_eee(pp->phylink, eee);
@@ -5053,11 +5050,6 @@ static int mvneta_ethtool_set_eee(struct net_device *dev,
 	lpi_ctl0 |= eee->tx_lpi_timer << 8;
 	mvreg_write(pp, MVNETA_LPI_CTRL_0, lpi_ctl0);
 
-	pp->eee_enabled = eee->eee_enabled;
-	pp->tx_lpi_enabled = eee->tx_lpi_enabled;
-
-	mvneta_set_eee(pp, eee->tx_lpi_enabled && eee->eee_enabled);
-
 	return phylink_ethtool_set_eee(pp->phylink, eee);
 }
 
-- 
2.40.0


  parent reply	other threads:[~2023-03-31  0:56 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-31  0:54 [RFC/RFTv3 00/24] net: ethernet: Rework EEE Andrew Lunn
2023-03-31  0:54 ` [RFC/RFTv3 01/24] net: phy: Add phydev->eee_active to simplify adjust link callbacks Andrew Lunn
2023-05-30 17:51   ` Florian Fainelli
2023-03-31  0:54 ` [RFC/RFTv3 02/24] net: phylink: Add mac_set_eee() callback Andrew Lunn
2023-03-31  0:54 ` [RFC/RFTv3 03/24] net: phy: Add helper to set EEE Clock stop enable bit Andrew Lunn
2023-03-31  0:54 ` [RFC/RFTv3 04/24] net: phy: Keep track of EEE tx_lpi_enabled Andrew Lunn
2023-05-30 18:11   ` Florian Fainelli
2023-05-30 18:14     ` Russell King (Oracle)
2023-03-31  0:54 ` [RFC/RFTv3 05/24] net: phy: Immediately call adjust_link if only tx_lpi_enabled changes Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 06/24] net: phylink: Handle change in EEE from phylib Andrew Lunn
2023-03-31  0:55 ` Andrew Lunn [this message]
2023-05-30 18:03   ` [RFC/RFTv3 07/24] net: marvell: mvneta: Simplify EEE configuration Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 08/24] net: stmmac: Drop usage of phy_init_eee() Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 09/24] net: stmmac: Simplify ethtool get eee Andrew Lunn
2023-05-19  7:11   ` Oleksij Rempel
2023-03-31  0:55 ` [RFC/RFTv3 10/24] net: lan743x: Fixup EEE Andrew Lunn
2023-05-30 18:03   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 11/24] net: fec: Move fec_enet_eee_mode_set() and helper earlier Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 12/24] net: FEC: Fixup EEE Andrew Lunn
2023-05-19 10:27   ` Oleksij Rempel
2023-03-31  0:55 ` [RFC/RFTv3 13/24] net: genet: " Andrew Lunn
2023-05-30 18:01   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 14/24] net: sxgdb: " Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 15/24] net: dsa: mt7530: Swap to using phydev->eee_active Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 16/24] net: dsa: b53: " Andrew Lunn
2023-05-30 18:05   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 17/24] net: phylink: Remove unused phylink_init_eee() Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 18/24] net: phy: remove unused phy_init_eee() Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 19/24] net: usb: lan78xx: Fixup EEE Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 20/24] net: phy: Add phy_support_eee() indicating MAC support EEE Andrew Lunn
2023-05-30 18:16   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 21/24] net: phylink: Add MAC_EEE to mac_capabilites Andrew Lunn
2023-05-30 18:18   ` Florian Fainelli
2023-03-31  0:55 ` [RFC/RFTv3 22/24] net: phylink: Extend mac_capabilities in MAC drivers which support EEE Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 23/24] net: phylib: call phy_support_eee() " Andrew Lunn
2023-03-31  0:55 ` [RFC/RFTv3 24/24] net: phy: Disable EEE advertisement by default Andrew Lunn
2023-05-26  8:56 ` [RFC/RFTv3 00/24] net: ethernet: Rework EEE Oleksij Rempel
2023-05-26 12:08   ` Andrew Lunn
2023-05-26 16:13     ` Florian Fainelli
2023-05-30 18:31 ` Florian Fainelli
2023-05-30 19:35   ` Russell King (Oracle)
2023-05-30 19:49     ` Russell King (Oracle)
2023-05-31  7:14       ` Oleksij Rempel
2023-05-31 14:41         ` Russell King (Oracle)
2023-05-30 19:48   ` Andrew Lunn
2023-05-30 20:03     ` Florian Fainelli
2023-05-30 20:36       ` Russell King (Oracle)
2023-05-30 20:28     ` Russell King (Oracle)
2023-05-30 23:03       ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230331005518.2134652-8-andrew@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux@rempel-privat.de \
    --cc=netdev@vger.kernel.org \
    --cc=rmk+kernel@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).