Re: [PATCH net-next] net: dsa: mv88e6xxx: Correct cmode to PHY_INTERFACE_

[Vladimir Oltean <vladimir.oltean@nxp.com>]

On Tue, Apr 11, 2023 at 04:35:41AM +0200, Andrew Lunn wrote:
> The switch can either take the MAC or the PHY role in an MII or RMII
> link. There are distinct PHY_INTERFACE_ macros for these two roles.
> Correct the mapping so that the `REV` version is used for the PHY
> role.
> 
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>

> 
> Since this has not caused any known issues so far, i decided to not
> add a Fixes: tag and submit for net.
> 
>  drivers/net/dsa/mv88e6xxx/chip.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
> index 62a126402983..ffe6a88f94ce 100644
> --- a/drivers/net/dsa/mv88e6xxx/chip.c
> +++ b/drivers/net/dsa/mv88e6xxx/chip.c
> @@ -611,10 +611,10 @@ static void mv88e6185_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
>  }
>  
>  static const u8 mv88e6xxx_phy_interface_modes[] = {
> -	[MV88E6XXX_PORT_STS_CMODE_MII_PHY]	= PHY_INTERFACE_MODE_MII,
> +	[MV88E6XXX_PORT_STS_CMODE_MII_PHY]	= PHY_INTERFACE_MODE_REVMII,
>  	[MV88E6XXX_PORT_STS_CMODE_MII]		= PHY_INTERFACE_MODE_MII,
>  	[MV88E6XXX_PORT_STS_CMODE_GMII]		= PHY_INTERFACE_MODE_GMII,
> -	[MV88E6XXX_PORT_STS_CMODE_RMII_PHY]	= PHY_INTERFACE_MODE_RMII,
> +	[MV88E6XXX_PORT_STS_CMODE_RMII_PHY]	= PHY_INTERFACE_MODE_REVRMII,
>  	[MV88E6XXX_PORT_STS_CMODE_RMII]		= PHY_INTERFACE_MODE_RMII,
>  	[MV88E6XXX_PORT_STS_CMODE_100BASEX]	= PHY_INTERFACE_MODE_100BASEX,
>  	[MV88E6XXX_PORT_STS_CMODE_1000BASEX]	= PHY_INTERFACE_MODE_1000BASEX,
> -- 
> 2.40.0
>