From: Harini Katakam <harini.katakam@amd.com>
To: <nicolas.ferre@microchip.com>, <davem@davemloft.net>,
<richardcochran@gmail.com>, <claudiu.beznea@microchip.com>,
<andrei.pistirica@microchip.com>, <kuba@kernel.org>,
<edumazet@google.com>, <pabeni@redhat.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<michal.simek@amd.com>, <harinikatakamlinux@gmail.com>,
<harini.katakam@amd.com>
Subject: [PATCH net-next v5 2/3] net: macb: Enable PTP unicast
Date: Tue, 11 Apr 2023 18:07:11 +0530 [thread overview]
Message-ID: <20230411123712.11459-3-harini.katakam@amd.com> (raw)
In-Reply-To: <20230411123712.11459-1-harini.katakam@amd.com>
From: Harini Katakam <harini.katakam@xilinx.com>
Enable transmission and reception of PTP unicast packets by
updating PTP unicast config bit and setting current HW mac
address as allowed address in PTP unicast filter registers.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
---
v5 and v4:
No change
v3:
Remove config check as it is handled in gem_has_ptp
v2:
Handle operation using a single write as suggested by Cladiu
drivers/net/ethernet/cadence/macb.h | 4 ++++
drivers/net/ethernet/cadence/macb_main.c | 13 +++++++++++--
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 07560803aa26..cfbdd0022764 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -95,6 +95,8 @@
#define GEM_SA4B 0x00A0 /* Specific4 Bottom */
#define GEM_SA4T 0x00A4 /* Specific4 Top */
#define GEM_WOL 0x00b8 /* Wake on LAN */
+#define GEM_RXPTPUNI 0x00D4 /* PTP RX Unicast address */
+#define GEM_TXPTPUNI 0x00D8 /* PTP TX Unicast address */
#define GEM_EFTSH 0x00e8 /* PTP Event Frame Transmitted Seconds Register 47:32 */
#define GEM_EFRSH 0x00ec /* PTP Event Frame Received Seconds Register 47:32 */
#define GEM_PEFTSH 0x00f0 /* PTP Peer Event Frame Transmitted Seconds Register 47:32 */
@@ -245,6 +247,8 @@
#define MACB_TZQ_OFFSET 12 /* Transmit zero quantum pause frame */
#define MACB_TZQ_SIZE 1
#define MACB_SRTSM_OFFSET 15 /* Store Receive Timestamp to Memory */
+#define MACB_PTPUNI_OFFSET 20 /* PTP Unicast packet enable */
+#define MACB_PTPUNI_SIZE 1
#define MACB_OSSMODE_OFFSET 24 /* Enable One Step Synchro Mode */
#define MACB_OSSMODE_SIZE 1
#define MACB_MIIONRGMII_OFFSET 28 /* MII Usage on RGMII Interface */
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index eab2d41fa571..e941ea365db1 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -287,6 +287,11 @@ static void macb_set_hwaddr(struct macb *bp)
top = cpu_to_le16(*((u16 *)(bp->dev->dev_addr + 4)));
macb_or_gem_writel(bp, SA1T, top);
+ if (gem_has_ptp(bp)) {
+ gem_writel(bp, RXPTPUNI, bottom);
+ gem_writel(bp, TXPTPUNI, bottom);
+ }
+
/* Clear unused address register sets */
macb_or_gem_writel(bp, SA2B, 0);
macb_or_gem_writel(bp, SA2T, 0);
@@ -773,8 +778,12 @@ static void macb_mac_link_up(struct phylink_config *config,
spin_unlock_irqrestore(&bp->lock, flags);
- /* Enable Rx and Tx */
- macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(RE) | MACB_BIT(TE));
+ /* Enable Rx and Tx; Enable PTP unicast */
+ ctrl = macb_readl(bp, NCR);
+ if (gem_has_ptp(bp))
+ ctrl |= MACB_BIT(PTPUNI);
+
+ macb_writel(bp, NCR, ctrl | MACB_BIT(RE) | MACB_BIT(TE));
netif_tx_wake_all_queues(ndev);
}
--
2.17.1
next prev parent reply other threads:[~2023-04-11 12:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-11 12:37 [PATCH net-next v5 0/3] Macb PTP minor updates Harini Katakam
2023-04-11 12:37 ` [PATCH net-next v5 1/3] net: macb: Update gem PTP support check Harini Katakam
2023-04-11 12:37 ` Harini Katakam [this message]
2023-04-11 12:37 ` [PATCH net-next v5 3/3] net: macb: Optimize reading HW timestamp Harini Katakam
2023-04-14 5:20 ` [PATCH net-next v5 0/3] Macb PTP minor updates patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230411123712.11459-3-harini.katakam@amd.com \
--to=harini.katakam@amd.com \
--cc=andrei.pistirica@microchip.com \
--cc=claudiu.beznea@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=harinikatakamlinux@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).