netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joe Damato <jdamato@fastly.com>
To: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org, jesse.brandeburg@intel.com,
	anthony.l.nguyen@intel.com, kuba@kernel.org,
	Joe Damato <jdamato@fastly.com>
Subject: [PATCH net 2/2] ixgbe: Allow ixgbe to reset default flow hash
Date: Sat, 15 Apr 2023 05:48:55 +0000	[thread overview]
Message-ID: <20230415054855.9293-3-jdamato@fastly.com> (raw)
In-Reply-To: <20230415054855.9293-1-jdamato@fastly.com>

ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported
by RSS. The driver should return the smaller of either:
  - The maximum number of RSS queues the device supports, OR
  - The number of RX queues configured

Prior to this change, running `ethtool -X $iface default` fails if the
number of queues configured is larger than the number supported by RSS,
even though changing the queue count correctly resets the flowhash to
use all supported queues.

Other drivers (for example, i40e) will succeed but the flow hash will
reset to support the maximum number of queues supported by RSS, even if
that amount is smaller than the configured amount.

Prior to this change:

$ sudo ethtool -L eth1 combined 20
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 20 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9    10    11    12    13    14    15
   16:      0     1     2     3     4     5     6     7
   24:      8     9    10    11    12    13    14    15
   32:      0     1     2     3     4     5     6     7
...

You can see that the flowhash was correctly set to use the maximum
number of queues supported by the driver (16).

However, asking the NIC to reset to "default" fails:

$ sudo ethtool -X eth1 default
Cannot set RX flow hash configuration: Invalid argument

After this change, the flowhash can be reset to default which will use
all of the available RSS queues (16) or the configured queue count,
whichever is smaller.

Starting with eth1 which has 10 queues and a flowhash distributing to
all 10 queues:

$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 10 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9     0     1     2     3     4     5
   16:      6     7     8     9     0     1     2     3
...

Increasing the queue count to 48 resets the flowhash to distribute to 16
queues, as it did before this patch:

$ sudo ethtool -L eth1 combined 48
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9    10    11    12    13    14    15
   16:      0     1     2     3     4     5     6     7
...

Due to the other bugfix in this series, the flowhash can be set to use
queues 0-5:

$ sudo ethtool -X eth1 equal 5
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
    0:      0     1     2     3     4     0     1     2
    8:      3     4     0     1     2     3     4     0
   16:      1     2     3     4     0     1     2     3
...

Due to this bugfix, the flowhash can be reset to default and use 16
queues:

$ sudo ethtool -X eth1 default
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
    0:      0     1     2     3     4     5     6     7
    8:      8     9    10    11    12    13    14    15
   16:      0     1     2     3     4     5     6     7
...

Signed-off-by: Joe Damato <jdamato@fastly.com>
---
 .../net/ethernet/intel/ixgbe/ixgbe_ethtool.c  | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 821dfd323fa9..0bbad4a5cc2f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2665,6 +2665,14 @@ static int ixgbe_get_rss_hash_opts(struct ixgbe_adapter *adapter,
 	return 0;
 }
 
+static int ixgbe_rss_indir_tbl_max(struct ixgbe_adapter *adapter)
+{
+	if (adapter->hw.mac.type < ixgbe_mac_X550)
+		return 16;
+	else
+		return 64;
+}
+
 static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 			   u32 *rule_locs)
 {
@@ -2673,7 +2681,8 @@ static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 
 	switch (cmd->cmd) {
 	case ETHTOOL_GRXRINGS:
-		cmd->data = adapter->num_rx_queues;
+		cmd->data = min_t(int, adapter->num_rx_queues,
+				  ixgbe_rss_indir_tbl_max(adapter));
 		ret = 0;
 		break;
 	case ETHTOOL_GRXCLSRLCNT:
@@ -3075,14 +3084,6 @@ static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 	return ret;
 }
 
-static int ixgbe_rss_indir_tbl_max(struct ixgbe_adapter *adapter)
-{
-	if (adapter->hw.mac.type < ixgbe_mac_X550)
-		return 16;
-	else
-		return 64;
-}
-
 static u32 ixgbe_get_rxfh_key_size(struct net_device *netdev)
 {
 	return IXGBE_RSS_KEY_SIZE;
-- 
2.25.1


  parent reply	other threads:[~2023-04-15  5:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-15  5:48 [PATCH net 0/2] ixgbe: Multiple RSS bugfixes Joe Damato
2023-04-15  5:48 ` [PATCH net 1/2] ixgbe: Allow flow hash to be set via ethtool Joe Damato
2023-04-16 14:46   ` Samudrala, Sridhar
2023-04-15  5:48 ` Joe Damato [this message]
2023-04-16 15:29   ` [PATCH net 2/2] ixgbe: Allow ixgbe to reset default flow hash Samudrala, Sridhar
2023-04-16 19:04     ` Joe Damato

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230415054855.9293-3-jdamato@fastly.com \
    --to=jdamato@fastly.com \
    --cc=anthony.l.nguyen@intel.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).