From: Horatiu Vultur <horatiu.vultur@microchip.com>
To: Alain Volmat <avolmat@me.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
<patrice.chotard@foss.st.com>, <netdev@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] net: ethernet: stmmac: dwmac-sti: remove stih415/stih416/stid127
Date: Mon, 17 Apr 2023 13:12:57 +0200 [thread overview]
Message-ID: <20230417111257.ilmlp5y3xp47edzv@soft-dev3-1> (raw)
In-Reply-To: <20230416195523.61075-1-avolmat@me.com>
The 04/16/2023 21:55, Alain Volmat wrote:
>
> Remove no more supported platforms (stih415/stih416 and stid127)
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
>
> Signed-off-by: Alain Volmat <avolmat@me.com>
> Acked-by: Jakub Kicinski <kuba@kernel.org>
> ---
> Patch sent previously as part of serie: https://lore.kernel.org/all/20230209091659.1409-8-avolmat@me.com/
>
> .../net/ethernet/stmicro/stmmac/dwmac-sti.c | 60 +------------------
> 1 file changed, 1 insertion(+), 59 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
> index be3b1ebc06ab..465ce66ef9c1 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
> @@ -35,7 +35,7 @@
> #define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \
> iface == PHY_INTERFACE_MODE_GMII)
>
> -/* STiH4xx register definitions (STiH415/STiH416/STiH407/STiH410 families)
> +/* STiH4xx register definitions (STiH407/STiH410 families)
> *
> * Below table summarizes the clock requirement and clock sources for
> * supported phy interface modes with link speeds.
> @@ -75,27 +75,6 @@
> #define STIH4XX_ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7)
> #define STIH4XX_ETH_SEL_TXCLK_NOT_CLK125 BIT(6)
>
> -/* STiD127 register definitions
> - *-----------------------
> - * src |BIT(6)| BIT(7)|
> - *-----------------------
> - * MII | 1 | n/a |
> - *-----------------------
> - * RMII | n/a | 1 |
> - * clkgen| | |
> - *-----------------------
> - * RMII | n/a | 0 |
> - * phyclk| | |
> - *-----------------------
> - * RGMII | 1 | n/a |
> - * clkgen| | |
> - *-----------------------
> - */
> -
> -#define STID127_RETIME_SRC_MASK GENMASK(7, 6)
> -#define STID127_ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7)
> -#define STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK BIT(6)
> -
> #define ENMII_MASK GENMASK(5, 5)
> #define ENMII BIT(5)
> #define EN_MASK GENMASK(1, 1)
> @@ -194,36 +173,6 @@ static void stih4xx_fix_retime_src(void *priv, u32 spd)
> stih4xx_tx_retime_val[src]);
> }
>
> -static void stid127_fix_retime_src(void *priv, u32 spd)
> -{
> - struct sti_dwmac *dwmac = priv;
> - u32 reg = dwmac->ctrl_reg;
> - u32 freq = 0;
> - u32 val = 0;
> -
> - if (dwmac->interface == PHY_INTERFACE_MODE_MII) {
> - val = STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK;
> - } else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) {
> - if (!dwmac->ext_phyclk) {
> - val = STID127_ETH_SEL_INTERNAL_NOTEXT_PHYCLK;
> - freq = DWMAC_50MHZ;
> - }
> - } else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) {
> - val = STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK;
> - if (spd == SPEED_1000)
> - freq = DWMAC_125MHZ;
> - else if (spd == SPEED_100)
> - freq = DWMAC_25MHZ;
> - else if (spd == SPEED_10)
> - freq = DWMAC_2_5MHZ;
> - }
> -
> - if (freq)
> - clk_set_rate(dwmac->clk, freq);
> -
> - regmap_update_bits(dwmac->regmap, reg, STID127_RETIME_SRC_MASK, val);
> -}
> -
> static int sti_dwmac_set_mode(struct sti_dwmac *dwmac)
> {
> struct regmap *regmap = dwmac->regmap;
> @@ -408,14 +357,7 @@ static const struct sti_dwmac_of_data stih4xx_dwmac_data = {
> .fix_retime_src = stih4xx_fix_retime_src,
> };
>
> -static const struct sti_dwmac_of_data stid127_dwmac_data = {
> - .fix_retime_src = stid127_fix_retime_src,
> -};
> -
> static const struct of_device_id sti_dwmac_match[] = {
> - { .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
> - { .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
> - { .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
> { .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
> { }
> };
> --
> 2.34.1
>
--
/Horatiu
next prev parent reply other threads:[~2023-04-17 11:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-16 19:55 [PATCH] net: ethernet: stmmac: dwmac-sti: remove stih415/stih416/stid127 Alain Volmat
2023-04-17 11:12 ` Horatiu Vultur [this message]
2023-04-19 4:50 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230417111257.ilmlp5y3xp47edzv@soft-dev3-1 \
--to=horatiu.vultur@microchip.com \
--cc=alexandre.torgue@foss.st.com \
--cc=avolmat@me.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=patrice.chotard@foss.st.com \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox