netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: arinc9.unal@gmail.com
To: Sean Wang <sean.wang@mediatek.com>,
	Landen Chao <Landen.Chao@mediatek.com>,
	DENG Qingfang <dqfext@gmail.com>,
	Daniel Golle <daniel@makrotopia.org>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	Russell King <linux@armlinux.org.uk>
Cc: "Arınç ÜNAL" <arinc.unal@arinc9.com>,
	"Richard van Schagen" <richard@routerhints.com>,
	"Richard van Schagen" <vschagen@cs.com>,
	"Frank Wunderlich" <frank-w@public-files.de>,
	"Bartel Eerdekens" <bartel.eerdekens@constell8.be>,
	erkin.bozoglu@xeront.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org
Subject: [PATCH net-next 08/24] net: dsa: mt7530: do not run mt7530_setup_port5() if port 5 is disabled
Date: Tue, 25 Apr 2023 11:29:17 +0300	[thread overview]
Message-ID: <20230425082933.84654-9-arinc.unal@arinc9.com> (raw)
In-Reply-To: <20230425082933.84654-1-arinc.unal@arinc9.com>

From: Arınç ÜNAL <arinc.unal@arinc9.com>

There's no need to run all the code on mt7530_setup_port5() if port 5 is
disabled. The only case for calling mt7530_setup_port5() from
mt7530_setup() is when PHY muxing is enabled. That is because port 5 is not
defined as a port on the devicetree, therefore, it cannot be controlled by
phylink.

Because of this, run mt7530_setup_port5() if priv->p5_intf_sel is
P5_INTF_SEL_PHY_P0 or P5_INTF_SEL_PHY_P4. Remove the P5_DISABLED case from
mt7530_setup_port5().

Stop initialising the interface variable as the remaining cases will always
call mt7530_setup_port5() with it initialised.

Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 drivers/net/dsa/mt7530.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index f3d238a46543..5ef348b6a4b2 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -932,9 +932,6 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 		/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
 		val &= ~MHWTRAP_P5_DIS;
 		break;
-	case P5_DISABLED:
-		interface = PHY_INTERFACE_MODE_NA;
-		break;
 	default:
 		dev_err(ds->dev, "Unsupported p5_intf_sel %d\n",
 			priv->p5_intf_sel);
@@ -2282,8 +2279,6 @@ mt7530_setup(struct dsa_switch *ds)
 		 * Set priv->p5_intf_sel to the appropriate value if PHY muxing
 		 * is detected.
 		 */
-		interface = PHY_INTERFACE_MODE_NA;
-
 		for_each_child_of_node(dn, mac_np) {
 			if (!of_device_is_compatible(mac_np,
 						     "mediatek,eth-mac"))
@@ -2315,7 +2310,9 @@ mt7530_setup(struct dsa_switch *ds)
 			break;
 		}
 
-		mt7530_setup_port5(ds, interface);
+		if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 ||
+		    priv->p5_intf_sel == P5_INTF_SEL_PHY_P4)
+			mt7530_setup_port5(ds, interface);
 	}
 
 #ifdef CONFIG_GPIOLIB
-- 
2.37.2


  parent reply	other threads:[~2023-04-25  8:31 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-25  8:29 [PATCH net-next 00/24] net: dsa: MT7530, MT7531, and MT7988 improvements arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 01/24] net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 02/24] net: dsa: mt7530: add missing @p5_interface to mt7530_priv description arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 03/24] net: dsa: mt7530: use p5_interface_select as data type for p5_intf_sel arinc9.unal
2023-04-25 15:06   ` Daniel Golle
2023-04-25  8:29 ` [PATCH net-next 04/24] net: dsa: mt7530: properly support MT7531AE and MT7531BE arinc9.unal
2023-04-25 15:04   ` Daniel Golle
2023-04-26  8:12     ` Arınç ÜNAL
2023-04-26 13:07       ` Daniel Golle
2023-04-26 14:39         ` Vladimir Oltean
2023-04-26 16:15           ` Daniel Golle
2023-04-25  8:29 ` [PATCH net-next 05/24] net: dsa: mt7530: improve comments regarding port 5 and 6 arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 06/24] net: dsa: mt7530: read XTAL value from correct register arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 07/24] net: dsa: mt7530: improve code path for setting up port 5 arinc9.unal
2023-04-25  8:29 ` arinc9.unal [this message]
2023-04-25  8:29 ` [PATCH net-next 09/24] net: dsa: mt7530: change p{5,6}_interface to p{5,6}_configured arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 10/24] net: dsa: mt7530: empty default case on mt7530_setup_port5() arinc9.unal
2023-04-25 15:13   ` Daniel Golle
2023-04-26  8:22     ` Arınç ÜNAL
2023-04-25  8:29 ` [PATCH net-next 11/24] net: dsa: mt7530: call port 6 setup from mt7530_mac_config() arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 12/24] net: dsa: mt7530: remove pad_setup function pointer arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 13/24] net: dsa: mt7530: move XTAL check to mt7530_setup() arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 14/24] net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6() arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 15/24] net: dsa: mt7530: switch to if/else statements on mt7530_setup_port6() arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 16/24] net: dsa: mt7530: set TRGMII RD TAP if trgmii is being used arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 17/24] net: dsa: mt7530: move lowering port 5 RGMII driving to mt7530_setup() arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 18/24] net: dsa: mt7530: fix port capabilities for MT7988 arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 19/24] net: dsa: mt7530: remove .mac_port_config for MT7988 and make it optional arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 20/24] net: dsa: mt7530: set interrupt register only for MT7530 arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 21/24] net: dsa: mt7530: force link-down on MACs before reset on MT7530 arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 22/24] net: dsa: mt7530: get rid of useless error returns on phylink code path arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 23/24] net: dsa: mt7530: rename p5_intf_sel and use only for MT7530 switch arinc9.unal
2023-04-25  8:29 ` [PATCH net-next 24/24] net: dsa: mt7530: run mt7530_pll_setup() only with 40 MHz XTAL arinc9.unal
2023-04-25 15:35 ` [PATCH net-next 00/24] net: dsa: MT7530, MT7531, and MT7988 improvements Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230425082933.84654-9-arinc.unal@arinc9.com \
    --to=arinc9.unal@gmail.com \
    --cc=Landen.Chao@mediatek.com \
    --cc=andrew@lunn.ch \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=arinc.unal@arinc9.com \
    --cc=bartel.eerdekens@constell8.be \
    --cc=daniel@makrotopia.org \
    --cc=davem@davemloft.net \
    --cc=dqfext@gmail.com \
    --cc=edumazet@google.com \
    --cc=erkin.bozoglu@xeront.com \
    --cc=f.fainelli@gmail.com \
    --cc=frank-w@public-files.de \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=richard@routerhints.com \
    --cc=sean.wang@mediatek.com \
    --cc=vschagen@cs.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).