From: Maxim Georgiev <glipus@gmail.com>
To: kory.maincent@bootlin.com
Cc: kuba@kernel.org, netdev@vger.kernel.org, glipus@gmail.com,
maxime.chevallier@bootlin.com, vladimir.oltean@nxp.com,
vadim.fedorenko@linux.dev, richardcochran@gmail.com,
gerhard@engleder-embedded.com, liuhangbin@gmail.com
Subject: [RFC PATCH net-next v6 5/5] netdevsim: Implement ndo_hwtstamp_get/set methods in netdevsim driver
Date: Mon, 1 May 2023 22:31:50 -0600 [thread overview]
Message-ID: <20230502043150.17097-6-glipus@gmail.com> (raw)
In-Reply-To: <20230502043150.17097-1-glipus@gmail.com>
Implementing ndo_hwtstamp_get/set methods in netdevsim driver
to use the newly introduced ndo_hwtstamp_get/setmake it respond to
SIOCGHWTSTAMP/SIOCSHWTSTAMP IOCTLs.
Also adding .get_ts_info ethtool method allowing to monitor
HW timestamp configuration values set using SIOCSHWTSTAMP·IOCTL.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
---
Notes:
Changes in v6:
- Patch title was updated. No code changes.
Changes in V4:
- Implemented .get_ts_info·ethtool·method.
- Tested the patch using hwstamp_ctl and ethtool:
[root@centosvm kernel-net-next]# ethtool -T eni0np1
Time stamping parameters for eni0np1:
Capabilities:
software-transmit
software-receive
software-system-clock
PTP Hardware Clock: none
Hardware Transmit Timestamp Modes: none
Hardware Receive Filter Modes: none
[root@centosvm kernel-net-next]# hwstamp_ctl -i eni0np1 -t 1 -r 0
current settings:
tx_type 0
rx_filter 0
new settings:
tx_type 1
rx_filter 0
[root@centosvm kernel-net-next]# ethtool -T eni0np1
Time stamping parameters for eni0np1:
Capabilities:
software-transmit
software-receive
software-system-clock
PTP Hardware Clock: none
Hardware Transmit Timestamp Modes:
off
Hardware Receive Filter Modes: none
[root@centosvm kernel-net-next]# hwstamp_ctl -i eni0np1 -t 1 -r 14
current settings:
tx_type 1
rx_filter 0
new settings:
tx_type 1
rx_filter 14
[root@centosvm kernel-net-next]# ethtool -T eni0np1
Time stamping parameters for eni0np1:
Capabilities:
software-transmit
software-receive
software-system-clock
PTP Hardware Clock: none
Hardware Transmit Timestamp Modes:
off
Hardware Receive Filter Modes:
all
some
ptpv1-l4-event
---
drivers/net/netdevsim/ethtool.c | 11 +++++++++++
drivers/net/netdevsim/netdev.c | 24 ++++++++++++++++++++++++
drivers/net/netdevsim/netdevsim.h | 1 +
3 files changed, 36 insertions(+)
diff --git a/drivers/net/netdevsim/ethtool.c b/drivers/net/netdevsim/ethtool.c
index ffd9f84b6644..cbb8e261b759 100644
--- a/drivers/net/netdevsim/ethtool.c
+++ b/drivers/net/netdevsim/ethtool.c
@@ -140,6 +140,16 @@ nsim_set_fecparam(struct net_device *dev, struct ethtool_fecparam *fecparam)
return 0;
}
+static int nsim_get_ts_info(struct net_device *netdev,
+ struct ethtool_ts_info *info)
+{
+ struct netdevsim *ns = netdev_priv(netdev);
+
+ info->tx_types = ns->hw_tstamp_config.tx_type;
+ info->rx_filters = ns->hw_tstamp_config.rx_filter;
+ return ethtool_op_get_ts_info(netdev, info);
+}
+
static const struct ethtool_ops nsim_ethtool_ops = {
.supported_coalesce_params = ETHTOOL_COALESCE_ALL_PARAMS,
.get_pause_stats = nsim_get_pause_stats,
@@ -153,6 +163,7 @@ static const struct ethtool_ops nsim_ethtool_ops = {
.set_channels = nsim_set_channels,
.get_fecparam = nsim_get_fecparam,
.set_fecparam = nsim_set_fecparam,
+ .get_ts_info = nsim_get_ts_info,
};
static void nsim_ethtool_ring_init(struct netdevsim *ns)
diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c
index 35fa1ca98671..6c29dfa3bb4e 100644
--- a/drivers/net/netdevsim/netdev.c
+++ b/drivers/net/netdevsim/netdev.c
@@ -238,6 +238,28 @@ nsim_set_features(struct net_device *dev, netdev_features_t features)
return 0;
}
+static int
+nsim_hwtstamp_get(struct net_device *dev,
+ struct kernel_hwtstamp_config *kernel_config,
+ struct netlink_ext_ack *extack)
+{
+ struct netdevsim *ns = netdev_priv(dev);
+
+ *kernel_config = ns->hw_tstamp_config;
+ return 0;
+}
+
+static int
+nsim_hwtstamp_set(struct net_device *dev,
+ struct kernel_hwtstamp_config *kernel_config,
+ struct netlink_ext_ack *extack)
+{
+ struct netdevsim *ns = netdev_priv(dev);
+
+ ns->hw_tstamp_config = *kernel_config;
+ return 0;
+}
+
static const struct net_device_ops nsim_netdev_ops = {
.ndo_start_xmit = nsim_start_xmit,
.ndo_set_rx_mode = nsim_set_rx_mode,
@@ -256,6 +278,8 @@ static const struct net_device_ops nsim_netdev_ops = {
.ndo_setup_tc = nsim_setup_tc,
.ndo_set_features = nsim_set_features,
.ndo_bpf = nsim_bpf,
+ .ndo_hwtstamp_get = nsim_hwtstamp_get,
+ .ndo_hwtstamp_set = nsim_hwtstamp_set,
};
static const struct net_device_ops nsim_vf_netdev_ops = {
diff --git a/drivers/net/netdevsim/netdevsim.h b/drivers/net/netdevsim/netdevsim.h
index 7d8ed8d8df5c..e78e88a0baa1 100644
--- a/drivers/net/netdevsim/netdevsim.h
+++ b/drivers/net/netdevsim/netdevsim.h
@@ -102,6 +102,7 @@ struct netdevsim {
} udp_ports;
struct nsim_ethtool ethtool;
+ struct kernel_hwtstamp_config hw_tstamp_config;
};
struct netdevsim *
--
2.40.1
next prev parent reply other threads:[~2023-05-02 4:32 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-02 4:31 [RFC PATCH net-next v6 0/5] New NDO methods ndo_hwtstamp_get/set Maxim Georgiev
2023-05-02 4:31 ` [RFC PATCH net-next v6 1/5] net: Add NDOs for hardware timestamp get/set Maxim Georgiev
2023-05-11 12:32 ` Vladimir Oltean
2023-05-12 3:22 ` Max Georgiev
2023-05-12 17:41 ` Jakub Kicinski
2023-05-15 15:36 ` Max Georgiev
2023-05-02 4:31 ` [RFC PATCH net-next v6 2/5] net: Add ifreq pointer field to kernel_hwtstamp_config structure Maxim Georgiev
2023-05-04 3:05 ` Jakub Kicinski
2023-05-04 15:21 ` Max Georgiev
2023-05-04 15:41 ` Jakub Kicinski
2023-05-11 9:30 ` Vladimir Oltean
2023-05-02 4:31 ` [RFC PATCH net-next v6 3/5] vlan/macvlan: Add ndo_hwtstamp_get/set support to vlan/macvlan code path Maxim Georgiev
2023-05-02 4:31 ` [RFC PATCH net-next v6 4/5] bond: Add ndo_hwtstamp_get/set support to bond driver Maxim Georgiev
2023-05-02 4:31 ` Maxim Georgiev [this message]
2023-06-21 2:23 ` [RFC PATCH net-next v6 0/5] New NDO methods ndo_hwtstamp_get/set Jakub Kicinski
2023-07-01 10:03 ` Vladimir Oltean
2023-07-01 14:51 ` Max Georgiev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230502043150.17097-6-glipus@gmail.com \
--to=glipus@gmail.com \
--cc=gerhard@engleder-embedded.com \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=liuhangbin@gmail.com \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=vadim.fedorenko@linux.dev \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).