From: Shawn Guo <shawnguo@kernel.org>
To: Andrew Lunn <andrew@lunn.ch>
Cc: s.hauer@pengutronix.de, Russell King <rmk+kernel@armlinux.org.uk>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
arm-soc <arm@kernel.org>, netdev <netdev@vger.kernel.org>
Subject: Re: [PATCH] ARM: dts: vf610: ZII: Add missing phy-mode and fixed links
Date: Sat, 13 May 2023 11:35:09 +0800 [thread overview]
Message-ID: <20230513033509.GD727834@dragon> (raw)
In-Reply-To: <20230412003746.2392518-1-andrew@lunn.ch>
On Wed, Apr 12, 2023 at 02:37:46AM +0200, Andrew Lunn wrote:
> The DSA framework has got more picky about always having a phy-mode
> for the CPU port. The Vybrid FEC is a Fast Ethrnet using RMII.
>
> Additionally, the cpu label has never actually been used in the
> binding, so remove it.
>
> Lastly, for DSA links between switches, add a fixed-link node
> indicating the expected speed/duplex of the link.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
> arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 +-
> arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 2 +-
> arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 10 ++++++++-
> arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 26 ++++++++++++++++++++++-
> arch/arm/boot/dts/vf610-zii-spb4.dts | 2 +-
> arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 2 +-
> arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 2 +-
> 7 files changed, 39 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
> index 96495d965163..b7bb2d6b3721 100644
> --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
> +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
> @@ -202,7 +202,7 @@ port@5 {
>
> port@6 {
> reg = <6>;
> - label = "cpu";
> + phy-mode = "rev-rmii";
> ethernet = <&fec1>;
>
> fixed-link {
> diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
> index 6280c5e86a12..3f1bc7fc8526 100644
> --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
> +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
> @@ -75,7 +75,7 @@ fixed-link {
>
> port@6 {
> reg = <6>;
> - label = "cpu";
> + phy-mode = "rev-rmii";
> ethernet = <&fec1>;
>
> fixed-link {
> diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
> index c00d39562a10..811745077d2b 100644
> --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
> +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
> @@ -44,7 +44,7 @@ ports {
>
> port@0 {
> reg = <0>;
> - label = "cpu";
> + phy-mode = "rev-rmii";
> ethernet = <&fec1>;
>
> fixed-link {
> @@ -82,6 +82,10 @@ switch0port10: port@10 {
> label = "dsa";
> phy-mode = "xaui";
> link = <&switch1port10>;
> + fixed-link {
Have a newline between properties and child node.
Shawn
> + speed = <10000>;
> + full-duplex;
> + };
> };
> };
>
> @@ -174,6 +178,10 @@ switch1port10: port@10 {
> label = "dsa";
> phy-mode = "xaui";
> link = <&switch0port10>;
> + fixed-link {
> + speed = <10000>;
> + full-duplex;
> + };
> };
> };
> mdio {
> diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> index 7b3276cd470f..7959307f7d13 100644
> --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
> @@ -59,7 +59,7 @@ ports {
>
> port@0 {
> reg = <0>;
> - label = "cpu";
> + phy-mode = "rev-rmii";
> ethernet = <&fec1>;
>
> fixed-link {
> @@ -115,6 +115,10 @@ switch0port10: port@10 {
> link = <&switch1port10
> &switch3port10
> &switch2port10>;
> + fixed-link {
> + speed = <10000>;
> + full-duplex;
> + };
> };
> };
> };
> @@ -156,6 +160,10 @@ switch1port9: port@9 {
> phy-mode = "xgmii";
> link = <&switch3port10
> &switch2port10>;
> + fixed-link {
> + speed = <10000>;
> + full-duplex;
> + };
> };
>
> switch1port10: port@10 {
> @@ -163,6 +171,10 @@ switch1port10: port@10 {
> label = "dsa";
> phy-mode = "xgmii";
> link = <&switch0port10>;
> + fixed-link {
> + speed = <10000>;
> + full-duplex;
> + };
> };
> };
> };
> @@ -246,6 +258,10 @@ switch2port10: port@10 {
> link = <&switch3port9
> &switch1port9
> &switch0port10>;
> + fixed-link {
> + speed = <2500>;
> + full-duplex;
> + };
> };
> };
> };
> @@ -295,6 +311,10 @@ switch3port9: port@9 {
> label = "dsa";
> phy-mode = "2500base-x";
> link = <&switch2port10>;
> + fixed-link {
> + speed = <2500>;
> + full-duplex;
> + };
> };
>
> switch3port10: port@10 {
> @@ -303,6 +323,10 @@ switch3port10: port@10 {
> phy-mode = "xgmii";
> link = <&switch1port9
> &switch0port10>;
> + fixed-link {
> + speed = <10000>;
> + full-duplex;
> + };
> };
> };
> };
> diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
> index 180acb0795b9..3f9687953f57 100644
> --- a/arch/arm/boot/dts/vf610-zii-spb4.dts
> +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
> @@ -140,7 +140,7 @@ ports {
>
> port@0 {
> reg = <0>;
> - label = "cpu";
> + phy-mode = "rev-rmii";
> ethernet = <&fec1>;
>
> fixed-link {
> diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> index 73fdace4cb42..d06a074bfe21 100644
> --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> @@ -129,7 +129,7 @@ ports {
>
> port@0 {
> reg = <0>;
> - label = "cpu";
> + phy-mode = "rev-rmii";
> ethernet = <&fec1>;
>
> fixed-link {
> diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
> index 20beaa8433b6..c60639beda40 100644
> --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
> +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
> @@ -154,7 +154,7 @@ ports {
>
> port@0 {
> reg = <0>;
> - label = "cpu";
> + phy-mode = "rev-rmii";
> ethernet = <&fec1>;
>
> fixed-link {
> --
> 2.40.0
>
prev parent reply other threads:[~2023-05-13 3:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-12 0:37 [PATCH] ARM: dts: vf610: ZII: Add missing phy-mode and fixed links Andrew Lunn
2023-05-13 3:35 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230513033509.GD727834@dragon \
--to=shawnguo@kernel.org \
--cc=andrew@lunn.ch \
--cc=arm@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=s.hauer@pengutronix.de \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).