netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Epping <david.epping@missinglinkelectronics.com>
To: Vladimir Oltean <olteanv@gmail.com>,
	Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	UNGLinuxDriver@microchip.com,
	David Epping <david.epping@missinglinkelectronics.com>
Subject: [PATCH net v2 2/3] net: phy: mscc: add support for VSC8501
Date: Tue, 23 May 2023 11:04:04 +0200	[thread overview]
Message-ID: <20230523090405.10655-3-david.epping@missinglinkelectronics.com> (raw)
In-Reply-To: <20230523090405.10655-1-david.epping@missinglinkelectronics.com>

The VSC8501 PHY can use the same driver implementation as the VSC8502.
Adding the PHY ID and copying the handler functions of VSC8502 is
sufficient to operate it.

Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
 drivers/net/phy/mscc/mscc.h      |  1 +
 drivers/net/phy/mscc/mscc_main.c | 25 +++++++++++++++++++++++++
 2 files changed, 26 insertions(+)

diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index a50235fdf7d9..79cbb2418664 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -276,6 +276,7 @@ enum rgmii_clock_delay {
 /* Microsemi PHY ID's
  *   Code assumes lowest nibble is 0
  */
+#define PHY_ID_VSC8501			  0x00070530
 #define PHY_ID_VSC8502			  0x00070630
 #define PHY_ID_VSC8504			  0x000704c0
 #define PHY_ID_VSC8514			  0x00070670
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index bd81a4b041e5..29fc27a16805 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -2316,6 +2316,30 @@ static int vsc85xx_probe(struct phy_device *phydev)
 
 /* Microsemi VSC85xx PHYs */
 static struct phy_driver vsc85xx_driver[] = {
+{
+	.phy_id		= PHY_ID_VSC8501,
+	.name		= "Microsemi GE VSC8501 SyncE",
+	.phy_id_mask	= 0xfffffff0,
+	/* PHY_BASIC_FEATURES */
+	.soft_reset	= &genphy_soft_reset,
+	.config_init	= &vsc85xx_config_init,
+	.config_aneg    = &vsc85xx_config_aneg,
+	.read_status	= &vsc85xx_read_status,
+	.handle_interrupt = vsc85xx_handle_interrupt,
+	.config_intr	= &vsc85xx_config_intr,
+	.suspend	= &genphy_suspend,
+	.resume		= &genphy_resume,
+	.probe		= &vsc85xx_probe,
+	.set_wol	= &vsc85xx_wol_set,
+	.get_wol	= &vsc85xx_wol_get,
+	.get_tunable	= &vsc85xx_get_tunable,
+	.set_tunable	= &vsc85xx_set_tunable,
+	.read_page	= &vsc85xx_phy_read_page,
+	.write_page	= &vsc85xx_phy_write_page,
+	.get_sset_count = &vsc85xx_get_sset_count,
+	.get_strings    = &vsc85xx_get_strings,
+	.get_stats      = &vsc85xx_get_stats,
+},
 {
 	.phy_id		= PHY_ID_VSC8502,
 	.name		= "Microsemi GE VSC8502 SyncE",
@@ -2656,6 +2680,7 @@ static struct phy_driver vsc85xx_driver[] = {
 module_phy_driver(vsc85xx_driver);
 
 static struct mdio_device_id __maybe_unused vsc85xx_tbl[] = {
+	{ PHY_ID_VSC8501, 0xfffffff0, },
 	{ PHY_ID_VSC8502, 0xfffffff0, },
 	{ PHY_ID_VSC8504, 0xfffffff0, },
 	{ PHY_ID_VSC8514, 0xfffffff0, },
-- 
2.17.1


  parent reply	other threads:[~2023-05-23  9:04 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-23  9:04 [PATCH net v2 0/3] net: phy: mscc: support VSC8501 David Epping
2023-05-23  9:04 ` [PATCH net v2 1/3] net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE David Epping
2023-05-23  9:04 ` David Epping [this message]
2023-05-23  9:04 ` [PATCH net v2 3/3] net: phy: mscc: enable VSC8501/2 RGMII RX clock David Epping
2023-05-23  9:12 ` [PATCH net v2 0/3] net: phy: mscc: support VSC8501 Russell King (Oracle)
2023-05-23 13:16 ` Andrew Lunn
2023-05-23 13:32   ` David Epping
2023-05-23 14:32     ` Russell King (Oracle)
2023-05-23 14:57       ` David Epping

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230523090405.10655-3-david.epping@missinglinkelectronics.com \
    --to=david.epping@missinglinkelectronics.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).