[PATCH AUTOSEL 4.19 02/27] xfrm: Check if_id in inbound policy/secpath match

[PATCH AUTOSEL 4.19 02/27] xfrm: Check if_id in inbound policy/secpath match

[Sasha Levin]

From: Benedict Wong <benedictwong@google.com>

[ Upstream commit 8680407b6f8f5fba59e8f1d63c869abc280f04df ]

This change ensures that if configured in the policy, the if_id set in
the policy and secpath states match during the inbound policy check.
Without this, there is potential for ambiguity where entries in the
secpath differing by only the if_id could be mismatched.

Notably, this is checked in the outbound direction when resolving
templates to SAs, but not on the inbound path when matching SAs and
policies.

Test: Tested against Android kernel unit tests & CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_policy.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 1cd21a8c4deac..6fe578773a51d 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2240,7 +2240,7 @@ xfrm_secpath_reject(int idx, struct sk_buff *skb, const struct flowi *fl)
 
 static inline int
 xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x,
-	      unsigned short family)
+	      unsigned short family, u32 if_id)
 {
 	if (xfrm_state_kern(x))
 		return tmpl->optional && !xfrm_state_addr_cmp(tmpl, x, tmpl->encap_family);
@@ -2251,7 +2251,8 @@ xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x,
 		(tmpl->allalgs || (tmpl->aalgos & (1<<x->props.aalgo)) ||
 		 !(xfrm_id_proto_match(tmpl->id.proto, IPSEC_PROTO_ANY))) &&
 		!(x->props.mode != XFRM_MODE_TRANSPORT &&
-		  xfrm_state_addr_cmp(tmpl, x, family));
+		  xfrm_state_addr_cmp(tmpl, x, family)) &&
+		(if_id == 0 || if_id == x->if_id);
 }
 
 /*
@@ -2263,7 +2264,7 @@ xfrm_state_ok(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x,
  */
 static inline int
 xfrm_policy_ok(const struct xfrm_tmpl *tmpl, const struct sec_path *sp, int start,
-	       unsigned short family)
+	       unsigned short family, u32 if_id)
 {
 	int idx = start;
 
@@ -2273,7 +2274,7 @@ xfrm_policy_ok(const struct xfrm_tmpl *tmpl, const struct sec_path *sp, int star
 	} else
 		start = -1;
 	for (; idx < sp->len; idx++) {
-		if (xfrm_state_ok(tmpl, sp->xvec[idx], family))
+		if (xfrm_state_ok(tmpl, sp->xvec[idx], family, if_id))
 			return ++idx;
 		if (sp->xvec[idx]->props.mode != XFRM_MODE_TRANSPORT) {
 			if (start == -1)
@@ -2450,7 +2451,7 @@ int __xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb,
 		 * are implied between each two transformations.
 		 */
 		for (i = xfrm_nr-1, k = 0; i >= 0; i--) {
-			k = xfrm_policy_ok(tpp[i], sp, k, family);
+			k = xfrm_policy_ok(tpp[i], sp, k, family, if_id);
 			if (k < 0) {
 				if (k < -1)
 					/* "-2 - errored_index" returned */
-- 
2.39.2

[PATCH AUTOSEL 4.19 24/27] netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 224a876e37543eee111bf9b6aa4935080e619335 ]

gcc with W=1 and ! CONFIG_NF_NAT
net/netfilter/nf_conntrack_netlink.c:3463:32: error:
  ‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]
 3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
      |                                ^~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:2979:33: error:
  ‘any_addr’ defined but not used [-Werror=unused-const-variable=]
 2979 | static const union nf_inet_addr any_addr;
      |                                 ^~~~~~~~

These variables use is controlled by CONFIG_NF_NAT, so should their definitions.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_netlink.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 58bba2e2691fa..eed597097fe1e 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -2689,7 +2689,9 @@ static int ctnetlink_exp_dump_mask(struct sk_buff *skb,
 	return -1;
 }
 
+#if IS_ENABLED(CONFIG_NF_NAT)
 static const union nf_inet_addr any_addr;
+#endif
 
 static __be32 nf_expect_get_id(const struct nf_conntrack_expect *exp)
 {
@@ -3189,10 +3191,12 @@ ctnetlink_change_expect(struct nf_conntrack_expect *x,
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_NF_NAT)
 static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
 	[CTA_EXPECT_NAT_DIR]	= { .type = NLA_U32 },
 	[CTA_EXPECT_NAT_TUPLE]	= { .type = NLA_NESTED },
 };
+#endif
 
 static int
 ctnetlink_parse_expect_nat(const struct nlattr *attr,
-- 
2.39.2

[PATCH AUTOSEL 4.19 26/27] atm: hide unused procfs functions

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit fb1b7be9b16c1f4626969ba4e95a97da2a452b41 ]

When CONFIG_PROC_FS is disabled, the function declarations for some
procfs functions are hidden, but the definitions are still build,
as shown by this compiler warning:

net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes]
net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes]
net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]

Add another #ifdef to leave these out of the build.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/atm/resources.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/atm/resources.c b/net/atm/resources.c
index bada395ecdb18..9389080224f87 100644
--- a/net/atm/resources.c
+++ b/net/atm/resources.c
@@ -447,6 +447,7 @@ int atm_dev_ioctl(unsigned int cmd, void __user *arg, int compat)
 	return error;
 }
 
+#ifdef CONFIG_PROC_FS
 void *atm_dev_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	mutex_lock(&atm_dev_mutex);
@@ -462,3 +463,4 @@ void *atm_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	return seq_list_next(v, &atm_devs, pos);
 }
+#endif
-- 
2.39.2

[PATCH AUTOSEL 4.19 27/27] mdio_bus: unhide mdio_bus_init prototype

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 2e9f8ab68f42b059e80db71266c1675c07c664bd ]

mdio_bus_init() is either used as a local module_init() entry,
or it gets called in phy_device.c. In the former case, there
is no declaration, which causes a warning:

drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes]

Remove the #ifdef around the declaration to avoid the warning..

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/phy.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 86a3792c568c2..dbaca6a6a32b8 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1080,10 +1080,8 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev,
 				   const struct ethtool_link_ksettings *cmd);
 int phy_ethtool_nway_reset(struct net_device *ndev);
 
-#if IS_ENABLED(CONFIG_PHYLIB)
 int __init mdio_bus_init(void);
 void mdio_bus_exit(void);
-#endif
 
 /* Inline function for use within net/core/ethtool.c (built-in) */
 static inline int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
-- 
2.39.2