netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Harini Katakam <harini.katakam@amd.com>
To: <andrew@lunn.ch>, <hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
	<davem@davemloft.net>, <kuba@kernel.org>, <edumazet@google.com>,
	<pabeni@redhat.com>, <vladimir.oltean@nxp.com>,
	<wsa+renesas@sang-engineering.com>, <simon.horman@corigine.com>,
	<david.epping@missinglinkelectronics.com>,
	<mk+kernel@armlinux.org.uk>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<harinikatakamlinux@gmail.com>, <michal.simek@amd.com>,
	<harini.katakam@amd.com>, <radhey.shyam.pandey@amd.com>
Subject: [PATCH net-next v5 2/2] phy: mscc: Add support for RGMII delay configuration
Date: Mon, 29 May 2023 17:50:17 +0530	[thread overview]
Message-ID: <20230529122017.10620-3-harini.katakam@amd.com> (raw)
In-Reply-To: <20230529122017.10620-1-harini.katakam@amd.com>

Add support for optional rx/tx-internal-delay-ps from devicetree.
- When rx/tx-internal-delay-ps is/are specified, these take priority
- When either is absent,
1) use 2ns for respective settings if rgmii-id/rxid/txid is/are present
2) use 0.2ns for respective settings if mode is rgmii

Signed-off-by: Harini Katakam <harini.katakam@amd.com>
---
v5:
- Rebase on top VSC8501 series, to avoid conflicts
- Rename _internal_delay to use vsc86xx, move declaration and
simplify format of pointer to above
- Acquire DT delay values in vsc85xx_update_rgmii_cntl instead of
vsc85xx_config_init to accommodate all VSC phy versions
v4:
Fix type of rx_delay and tx_delay
Reported by Simon Horman and
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305140248.lh4LUw2j-lkp@intel.com/
v3 - Patch split:
- Use rx/tx-internal-delay-ps with phy_get_internal_delay
- Change RGMII delay selection precedence
- Update commit description and subject everywhere to say RGMII delays
instead of RGMII tuning.

 drivers/net/phy/mscc/mscc_main.c | 35 ++++++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index fc074bcc894d..669a4a7a28ce 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -107,6 +107,9 @@ static const struct vsc8531_edge_rate_table edge_table[] = {
 };
 #endif
 
+static const int vsc85xx_internal_delay[] = {200, 800, 1100, 1700, 2000, 2300,
+					     2600, 3400};
+
 static int vsc85xx_phy_read_page(struct phy_device *phydev)
 {
 	return __phy_read(phydev, MSCC_EXT_PAGE_ACCESS);
@@ -525,8 +528,12 @@ static int vsc85xx_update_rgmii_cntl(struct phy_device *phydev, u32 rgmii_cntl,
 {
 	u16 rgmii_rx_delay_pos = ffs(rgmii_rx_delay_mask) - 1;
 	u16 rgmii_tx_delay_pos = ffs(rgmii_tx_delay_mask) - 1;
+	int delay_size = ARRAY_SIZE(vsc85xx_internal_delay);
+	struct device *dev = &phydev->mdio.dev;
 	u16 reg_val = 0;
 	u16 mask = 0;
+	s32 rx_delay;
+	s32 tx_delay;
 	int rc = 0;
 
 	/* For traffic to pass, the VSC8502 family needs the RX_CLK disable bit
@@ -541,12 +548,28 @@ static int vsc85xx_update_rgmii_cntl(struct phy_device *phydev, u32 rgmii_cntl,
 	if (phy_interface_is_rgmii(phydev))
 		mask |= rgmii_rx_delay_mask | rgmii_tx_delay_mask;
 
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
-	    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
-		reg_val |= RGMII_CLK_DELAY_2_0_NS << rgmii_rx_delay_pos;
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
-	    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
-		reg_val |= RGMII_CLK_DELAY_2_0_NS << rgmii_tx_delay_pos;
+	rx_delay = phy_get_internal_delay(phydev, dev, vsc85xx_internal_delay,
+					  delay_size, true);
+	if (rx_delay < 0) {
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
+		    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+			rx_delay = RGMII_CLK_DELAY_2_0_NS;
+		else
+			rx_delay = RGMII_CLK_DELAY_0_2_NS;
+	}
+
+	tx_delay = phy_get_internal_delay(phydev, dev, vsc85xx_internal_delay,
+					  delay_size, false);
+	if (tx_delay < 0) {
+		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+		    phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+			rx_delay = RGMII_CLK_DELAY_2_0_NS;
+		else
+			rx_delay = RGMII_CLK_DELAY_0_2_NS;
+	}
+
+	reg_val |= rx_delay << rgmii_rx_delay_pos;
+	reg_val |= tx_delay << rgmii_tx_delay_pos;
 
 	if (mask)
 		rc = phy_modify_paged(phydev, MSCC_PHY_PAGE_EXTENDED_2,
-- 
2.17.1


  parent reply	other threads:[~2023-05-29 12:21 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-29 12:20 [PATCH net-next v5 0/2] Add support for VSC85xx DT RGMII delays Harini Katakam
2023-05-29 12:20 ` [PATCH net-next v5 1/2] phy: mscc: Use PHY_ID_MATCH_VENDOR to minimize PHY ID table Harini Katakam
2023-05-29 12:20 ` Harini Katakam [this message]
2023-06-01  5:40 ` [PATCH net-next v5 0/2] Add support for VSC85xx DT RGMII delays patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230529122017.10620-3-harini.katakam@amd.com \
    --to=harini.katakam@amd.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=david.epping@missinglinkelectronics.com \
    --cc=edumazet@google.com \
    --cc=harinikatakamlinux@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=michal.simek@amd.com \
    --cc=mk+kernel@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=radhey.shyam.pandey@amd.com \
    --cc=simon.horman@corigine.com \
    --cc=vladimir.oltean@nxp.com \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).