[net-next 03/15] net/mlx5: Check DTOR entry value is not zero

[Saeed Mahameed <saeed@kernel.org>]

From: Moshe Shemesh <moshe@nvidia.com>

The Default Timeout Register (DTOR) provides timeout values to driver
for flows that are device dependent. Zero value for DTOR entry is not
valid and should not be used. In case of reading zero value from DTOR,
the driver should use the hard coded SW default value instead.

Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c
index a87d0178ebf3..e223e0e46433 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/tout.c
@@ -119,7 +119,8 @@ u64 _mlx5_tout_ms(struct mlx5_core_dev *dev, enum mlx5_timeouts_types type)
 #define MLX5_TIMEOUT_FILL(fld, reg_out, dev, to_type, to_extra) \
 	({ \
 	u64 fw_to = MLX5_TIMEOUT_QUERY(fld, reg_out); \
-	tout_set(dev, fw_to + (to_extra), to_type); \
+	if (fw_to) \
+		tout_set(dev, fw_to + (to_extra), to_type); \
 	fw_to; \
 	})
 
-- 
2.40.1