netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Walle <mwalle@kernel.org>
To: "Andrew Lunn" <andrew@lunn.ch>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"Russell King" <linux@armlinux.org.uk>,
	"David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Yisen Zhuang" <yisen.zhuang@huawei.com>,
	"Salil Mehta" <salil.mehta@huawei.com>,
	"Florian Fainelli" <florian.fainelli@broadcom.com>,
	"Broadcom internal kernel review list"
	<bcm-kernel-feedback-list@broadcom.com>,
	"Marek Behún" <kabel@kernel.org>, "Xu Liang" <lxu@maxlinear.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	 Simon Horman <simon.horman@corigine.com>,
	Michael Walle <mwalle@kernel.org>
Subject: [PATCH net-next v3 09/11] net: phy: introduce phy_promote_to_c45()
Date: Wed, 12 Jul 2023 17:07:09 +0200	[thread overview]
Message-ID: <20230620-feature-c45-over-c22-v3-9-9eb37edf7be0@kernel.org> (raw)
In-Reply-To: <20230620-feature-c45-over-c22-v3-0-9eb37edf7be0@kernel.org>

If not explitly asked to be probed as a C45 PHY, on a bus which is
capable of doing both C22 and C45 transfers, C45 PHYs are first tried to
be probed as C22 PHYs. To be able to promote the PHY to be a C45 one,
the driver can call phy_promote_to_c45() in its probe function.

This was already done in the mxl-gpy driver by the following snippet:

   if (!phy_is_c45(phydev)) {
           ret = phy_get_c45_ids(phydev);
           if (ret < 0)
                   return ret;
   }

Move that code into the core as it could be used by other drivers, too.
If a PHY is promoted C45-over-C22 access is automatically used as a
fallback if the bus doesn't support C45 transactions.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/net/phy/mxl-gpy.c    |  9 ++++-----
 drivers/net/phy/phy_device.c | 36 ++++++++++++++++++++++++++++++------
 include/linux/phy.h          |  7 ++++++-
 3 files changed, 40 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index b4ddb9a003d9..b7fca1aae1c3 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -281,11 +281,10 @@ static int gpy_probe(struct phy_device *phydev)
 	int fw_version;
 	int ret;
 
-	if (!phy_has_c45_registers(phydev)) {
-		ret = phy_get_c45_ids(phydev);
-		if (ret < 0)
-			return ret;
-	}
+	/* This might have been probed as a C22 PHY, but this is a C45 PHY */
+	ret = phy_promote_to_c45(phydev);
+	if (ret)
+		return ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 01c41ecb63a7..97fb3cb8b54c 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1057,18 +1057,42 @@ void phy_device_remove(struct phy_device *phydev)
 EXPORT_SYMBOL(phy_device_remove);
 
 /**
- * phy_get_c45_ids - Read 802.3-c45 IDs for phy device.
- * @phydev: phy_device structure to read 802.3-c45 IDs
+ * phy_promote_to_c45 - Promote to a C45 PHY
+ * @phydev: phy_device structure
+ *
+ * If a PHY supports both C22 and C45 register access and it isn't specifically
+ * asked to probe as a C45 PHY it might be probed as a C22 PHY. The driver can
+ * call this function to promote the PHY from C22 to C45.
+ *
+ * Can also be called if a PHY is already a C45 one. In that case it does
+ * nothing.
+ *
+ * If the bus isn't capable of doing C45 transfers, C45-over-C22 access will be
+ * used as a fallback.
  *
  * Returns zero on success, %-EIO on bus access error, or %-ENODEV if
  * the "devices in package" is invalid.
  */
-int phy_get_c45_ids(struct phy_device *phydev)
+int phy_promote_to_c45(struct phy_device *phydev)
 {
-	return get_phy_c45_ids(phydev->mdio.bus, phydev->mdio.addr,
-			       PHY_ACCESS_C45, &phydev->c45_ids);
+	struct mii_bus *bus = phydev->mdio.bus;
+
+	if (phydev->access_mode != PHY_ACCESS_C22)
+		return 0;
+
+	if (dev_of_node(&phydev->mdio.dev))
+		phydev_info(phydev,
+			    "Promoting PHY to a C45 one. Please consider using compatible=\"ethernet-phy-ieee802.3-c45\".");
+
+	if (mdiobus_supports_c45(bus))
+		phydev->access_mode = PHY_ACCESS_C45;
+	else
+		phydev->access_mode = PHY_ACCESS_C45_OVER_C22;
+
+	return get_phy_c45_ids(bus, phydev->mdio.addr, phydev->access_mode,
+			       &phydev->c45_ids);
 }
-EXPORT_SYMBOL(phy_get_c45_ids);
+EXPORT_SYMBOL(phy_promote_to_c45);
 
 /**
  * phy_find_first - finds the first PHY device on the bus
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e4014972b799..180fa5ac0b29 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -467,6 +467,11 @@ struct phy_device *mdiobus_scan_c22(struct mii_bus *bus, int addr);
 
 void mdiobus_scan_for_broken_c45_access(struct mii_bus *bus);
 
+static inline bool mdiobus_supports_c45(struct mii_bus *bus)
+{
+	return bus->read_c45 && !bus->prevent_c45_access;
+}
+
 #define PHY_INTERRUPT_DISABLED	false
 #define PHY_INTERRUPT_ENABLED	true
 
@@ -1701,7 +1706,7 @@ static inline int phy_device_register(struct phy_device *phy)
 static inline void phy_device_free(struct phy_device *phydev) { }
 #endif /* CONFIG_PHYLIB */
 void phy_device_remove(struct phy_device *phydev);
-int phy_get_c45_ids(struct phy_device *phydev);
+int phy_promote_to_c45(struct phy_device *phydev);
 int phy_init_hw(struct phy_device *phydev);
 int phy_suspend(struct phy_device *phydev);
 int phy_resume(struct phy_device *phydev);

-- 
2.39.2


  parent reply	other threads:[~2023-07-12 15:08 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-12 15:07 [PATCH net-next v3 00/11] net: phy: C45-over-C22 access Michael Walle
2023-07-12 15:07 ` [PATCH net-next v3 01/11] net: phy: get rid of redundant is_c45 information Michael Walle
2023-07-18 17:25   ` Andrew Lunn
2023-07-12 15:07 ` [PATCH net-next v3 02/11] net: phy: introduce phy_has_c45_registers() Michael Walle
2023-07-18 17:26   ` Andrew Lunn
2023-07-18 20:07   ` Andrew Lunn
2023-07-19  7:11     ` Michael Walle
2023-08-01 14:47       ` Michael Walle
2023-08-01 14:57         ` Russell King (Oracle)
2023-08-01 15:20           ` Michael Walle
2023-08-01 15:57             ` Russell King (Oracle)
2023-08-02 15:33               ` Michael Walle
2023-08-02 16:06                 ` Russell King (Oracle)
2023-08-02 17:11                   ` Michael Walle
2023-08-02 23:00                     ` Russell King (Oracle)
2023-08-02 16:15                 ` Andrew Lunn
2023-08-02 17:10                   ` Russell King (Oracle)
2023-08-02 22:21                     ` Andrew Lunn
2023-08-02 22:28                       ` Russell King (Oracle)
2023-09-05  8:22                         ` Michael Walle
2023-07-12 15:07 ` [PATCH net-next v3 03/11] net: phy: replace is_c45 with phy_accces_mode Michael Walle
2023-07-18 17:40   ` Andrew Lunn
2023-07-18 17:52     ` Russell King (Oracle)
2023-07-18 19:18       ` Andrew Lunn
2023-07-18 21:46         ` Russell King (Oracle)
2023-07-18 23:30           ` Andrew Lunn
2023-07-18 19:53     ` Michael Walle
2023-07-18 20:16       ` Andrew Lunn
2023-07-12 15:07 ` [PATCH net-next v3 04/11] net: phy: make the "prevent_c45_scan" a property of the MII bus Michael Walle
2023-07-18 23:31   ` Andrew Lunn
2023-07-12 15:07 ` [PATCH net-next v3 05/11] net: phy: print an info if a broken C45 bus is found Michael Walle
2023-07-18 23:32   ` Andrew Lunn
2023-07-12 15:07 ` [PATCH net-next v3 06/11] net: phy: add error checks in mmd_phy_indirect() Michael Walle
2023-07-18 23:34   ` Andrew Lunn
2023-07-12 15:07 ` [PATCH net-next v3 07/11] net: phy: introduce phy_mdiobus_read_mmd() Michael Walle
2023-07-18 23:54   ` Andrew Lunn
2023-07-19  7:21     ` Michael Walle
2023-07-12 15:07 ` [PATCH net-next v3 08/11] net: phy: add support for C45-over-C22 transfers Michael Walle
2023-07-13  8:56   ` Simon Horman
2023-07-13  9:00     ` Michael Walle
2023-07-13  9:19       ` Simon Horman
2023-07-12 15:07 ` Michael Walle [this message]
2023-07-13  8:56   ` [PATCH net-next v3 09/11] net: phy: introduce phy_promote_to_c45() Simon Horman
2023-07-12 15:07 ` [PATCH net-next v3 10/11] net: mdio: add C45-over-C22 fallback to fwnode_mdiobus_register_phy() Michael Walle
2023-07-19  0:03   ` Andrew Lunn
2023-07-19  7:32     ` Michael Walle
2023-07-12 15:07 ` [PATCH net-next v3 11/11] net: mdio: support C45-over-C22 when probed via OF Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230620-feature-c45-over-c22-v3-9-9eb37edf7be0@kernel.org \
    --to=mwalle@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=hkallweit1@gmail.com \
    --cc=kabel@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=lxu@maxlinear.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=salil.mehta@huawei.com \
    --cc=simon.horman@corigine.com \
    --cc=yisen.zhuang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).