[RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride

[RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Bjorn,

Now that all other bits and pieces are in next, I'm resending the reviewed
DTS patches for pick up. This enables one of the 1Gb ethernet ports on
sa8775p-ride.

Bartosz Golaszewski (5):
  arm64: dts: qcom: sa8775p: add the SGMII PHY node
  arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
  arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
  arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
  arm64: dts: qcom: sa8775p-ride: enable ethernet0

 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 109 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sa8775p.dtsi     |  42 +++++++++
 2 files changed, 151 insertions(+)

-- 
2.39.2

[RESEND PATCH v2 1/5] arm64: dts: qcom: sa8775p: add the SGMII PHY node

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add the internal SGMII/SerDes PHY node for sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index b130136acffe..b6d95813c98c 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1837,6 +1837,15 @@ adreno_smmu: iommu@3da0000 {
 				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		serdes0: phy@8901000 {
+			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08901000 0x0 0xe10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x30000>,
-- 
2.39.2

[RESEND PATCH v2 2/5] arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add the node for the first ethernet interface on sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 33 +++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index b6d95813c98c..59eedfc9c2cb 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2315,6 +2315,39 @@ cpufreq_hw: cpufreq@18591000 {
 
 			#freq-domain-cells = <1>;
 		};
+
+		ethernet0: ethernet@23040000 {
+			compatible = "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23040000 0x0 0x10000>,
+			      <0x0 0x23056000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC0_PTP_CLK>,
+				 <&gcc GCC_EMAC0_PHY_AUX_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+
+			power-domains = <&gcc EMAC0_GDSC>;
+
+			phys = <&serdes0>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x120 0xf>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <16384>;
+
+			status = "disabled";
+		};
 	};
 
 	arch_timer: timer {
-- 
2.39.2

[RESEND PATCH v2 3/5] arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Enable the internal PHY on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index ab767cfa51ff..9f39ab59c283 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -355,6 +355,11 @@ &qupv3_id_2 {
 	status = "okay";
 };
 
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
 &sleep_clk {
 	clock-frequency = <32764>;
 };
-- 
2.39.2

[RESEND PATCH v2 4/5] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add the MDC and MDIO pin functions for ethernet0 on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 9f39ab59c283..bf90f825ff67 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -371,6 +371,22 @@ &spi16 {
 };
 
 &tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
 	qup_uart10_default: qup-uart10-state {
 		pins = "gpio46", "gpio47";
 		function = "qup1_se3";
-- 
2.39.2

[RESEND PATCH v2 5/5] arm64: dts: qcom: sa8775p-ride: enable ethernet0

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Enable the first 1Gb ethernet port on sa8775p-ride development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 88 +++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index bf90f825ff67..b2aa16037707 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -261,6 +261,94 @@ vreg_l8e: ldo8 {
 	};
 };
 
+&ethernet0 {
+	phy-mode = "sgmii";
+	phy-handle = <&sgmii_phy>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <11000>;
+		reset-post-delay-us = <70000>;
+
+		sgmii_phy: phy@8 {
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
 &i2c11 {
 	clock-frequency = <400000>;
 	pinctrl-0 = <&qup_i2c11_default>;
-- 
2.39.2

Re: [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride

[Andrew Halaney]

On Thu, Jun 22, 2023 at 02:01:37PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Bjorn,
> 
> Now that all other bits and pieces are in next, I'm resending the reviewed
> DTS patches for pick up. This enables one of the 1Gb ethernet ports on
> sa8775p-ride.
> 
> Bartosz Golaszewski (5):
>   arm64: dts: qcom: sa8775p: add the SGMII PHY node
>   arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
>   arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
>   arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
>   arm64: dts: qcom: sa8775p-ride: enable ethernet0
> 
>  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 109 ++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi     |  42 +++++++++
>  2 files changed, 151 insertions(+)
> 
> -- 
> 2.39.2
> 

Tested-by: Andrew Halaney <ahalaney@redhat.com>

note, I did uncover a bug in stmmac (imo) wrt unbalanced calls to
serdes_powerup/serdes_powerdown() which I plan on trying to fix shortly.

Not really related to any of the Qualcomm specific bits though. This
looks good to me.

You can trigger the bug I mentioned by removing the dwmac-qcom-ethqos module:

    [  174.893710] ------------[ cut here ]------------
    [  174.898459] unbalanced disables for vreg_l5a
    [  174.902868] WARNING: CPU: 5 PID: 584 at drivers/regulator/core.c:2996 _regulator_disable+0xe8/0x1c8
    [  174.912150] Modules linked in: r8152 rfkill marvell dwmac_qcom_ethqos(-) stmmac_platform stmmac qcom_pon crct10dif_ce spi_geni_qcom i2c_qcom_geni phy_qcom_qmp_usb pcs_xpcs phy_qcom_snps_femto_v2 qcom_wdt socinfo fuse ufs_qcom phy_qcom_qmp_ufs
    [  174.934171] CPU: 5 PID: 584 Comm: modprobe Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
    [  174.944250] Hardware name: Qualcomm SA8775P Ride (DT)
    [  174.949438] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    [  174.956578] pc : _regulator_disable+0xe8/0x1c8
    [  174.961143] lr : _regulator_disable+0xe8/0x1c8
    [  174.965709] sp : ffff800082c13b50
    [  174.969114] x29: ffff800082c13b50 x28: ffff592b4c692d00 x27: 0000000000000000
    [  174.976431] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
    [  174.983750] x23: ffff592b40dd8c90 x22: ffff592b40f47490 x21: ffff592b41a72000
    [  174.991067] x20: ffff592b409c6900 x19: ffff592b409c6900 x18: 0000000000000006
    [  174.998385] x17: 3630333230322d74 x16: ffffcc489c71e6f8 x15: ffff800082c135d0
    [  175.005702] x14: 0000000000000000 x13: 61356c5f67657276 x12: 20726f662073656c
    [  175.013019] x11: fffffffffffe0000 x10: ffffcc489ea33488 x9 : ffffcc489c27aa10
    [  175.020336] x8 : 00000000ffffefff x7 : ffffcc489ea33488 x6 : 80000000fffff000
    [  175.027654] x5 : ffff5939bb92acc8 x4 : 0000000000000000 x3 : 0000000000000000
    [  175.034971] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff592b4c692d00
    [  175.042289] Call trace:
    [  175.044802]  _regulator_disable+0xe8/0x1c8
    [  175.049010]  regulator_disable+0x4c/0x98
    [  175.053040]  phy_power_off+0x90/0xe0
    [  175.056714]  qcom_ethqos_serdes_powerdown+0x28/0x48 [dwmac_qcom_ethqos]
    [  175.063510]  stmmac_dvr_remove+0xa0/0x178 [stmmac]
    [  175.068440]  stmmac_pltfr_remove+0x2c/0x80 [stmmac_platform]
    [  175.074255]  platform_remove+0x34/0x80
    [  175.078107]  device_remove+0x54/0x90
    [  175.081783]  device_release_driver_internal+0x1dc/0x240
    [  175.087150]  driver_detach+0x58/0xa8
    [  175.090824]  bus_remove_driver+0x74/0xd0
    [  175.094856]  driver_unregister+0x38/0x70
    [  175.098887]  platform_driver_unregister+0x1c/0x30
    [  175.103721]  qcom_ethqos_driver_exit+0x18/0x1b8 [dwmac_qcom_ethqos]
    [  175.110160]  __arm64_sys_delete_module+0x1a8/0x298
    [  175.115082]  invoke_syscall+0x50/0x128
    [  175.118936]  el0_svc_common.constprop.0+0xcc/0xf8
    [  175.123770]  do_el0_svc+0x40/0xa8
    [  175.127178]  el0_svc+0x2c/0x88
    [  175.130318]  el0t_64_sync_handler+0x100/0x130
    [  175.134795]  el0t_64_sync+0x190/0x198
    [  175.138560] ---[ end trace 0000000000000000 ]---
    [root@dhcp19-243-249 ~]# 

Just dumping the stack on serdes_powerdown/up calls you get the
following:

    [    6.179584] qcom-ethqos 23040000.ethernet eth0: PHY [stmmac-0:08] driver [Marvell 88E1510] (irq=POLL)
    [    6.189571] CPU: 0 PID: 323 Comm: NetworkManager Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
    [    6.200192] Hardware name: Qualcomm SA8775P Ride (DT)
    [    6.205373] Call trace:
    [    6.207896]  dump_backtrace+0x9c/0x100
    [    6.211752]  show_stack+0x20/0x38
    [    6.215160]  dump_stack_lvl+0x48/0x60
    [    6.218929]  dump_stack+0x18/0x28
    [    6.222335]  qcom_ethqos_serdes_powerup+0x20/0x70 [dwmac_qcom_ethqos]
    [    6.228957]  __stmmac_open+0x138/0x488 [stmmac]
    [    6.233634]  stmmac_open+0x4c/0xe8 [stmmac]
    [    6.237948]  __dev_open+0x108/0x1e8
    [    6.241535]  __dev_change_flags+0x194/0x218
    [    6.245834]  dev_change_flags+0x2c/0x80
    [    6.249778]  do_setlink+0x2b0/0xef8
    [    6.253363]  __rtnl_newlink+0x514/0x870
    [    6.257305]  rtnl_newlink+0x58/0x90
    [    6.260891]  rtnetlink_rcv_msg+0x134/0x390
    [    6.265100]  netlink_rcv_skb+0x64/0x138
    [    6.269046]  rtnetlink_rcv+0x20/0x38
    [    6.272721]  netlink_unicast+0x2f0/0x350
    [    6.276755]  netlink_sendmsg+0x1b0/0x430
    [    6.280789]  ____sys_sendmsg+0x1d8/0x2c8
    [    6.284826]  ___sys_sendmsg+0xb4/0x110
    [    6.288680]  __sys_sendmsg+0x8c/0xf0
    [    6.292357]  __arm64_sys_sendmsg+0x2c/0x40
    [    6.296570]  invoke_syscall+0x50/0x128
    [    6.300424]  el0_svc_common.constprop.0+0xcc/0xf8
    [    6.305253]  do_el0_svc+0x40/0xa8
    [    6.308662]  el0_svc+0x2c/0x88
    [    6.311804]  el0t_64_sync_handler+0x100/0x130
    [    6.316285]  el0t_64_sync+0x190/0x198
    <snip>
    [root@dhcp19-243-249 ~]# modprobe -r dwmac_qcom_ethqos
    [  174.562075] qcom-ethqos 23040000.ethernet eth0: stmmac_dvr_remove: removing driver
    [  174.570660] stmmac_pcs: Link Down
    [  174.580082] CPU: 5 PID: 584 Comm: modprobe Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
    [  174.590176] Hardware name: Qualcomm SA8775P Ride (DT)
    [  174.595363] Call trace:
    [  174.597881]  dump_backtrace+0x9c/0x100
    [  174.601744]  show_stack+0x20/0x38
    [  174.605154]  dump_stack_lvl+0x48/0x60
    [  174.608926]  dump_stack+0x18/0x28
    [  174.612339]  qcom_ethqos_serdes_powerdown+0x20/0x48 [dwmac_qcom_ethqos]
    [  174.619138]  stmmac_release+0x234/0x2e0 [stmmac]
    [  174.623893]  __dev_close_many+0xb4/0x160
    [  174.627920]  dev_close_many+0x8c/0x140
    [  174.631777]  unregister_netdevice_many_notify+0x140/0x7a0
    [  174.637320]  unregister_netdevice_queue+0xa0/0xe8
    [  174.642151]  unregister_netdev+0x2c/0x48
    [  174.646179]  stmmac_dvr_remove+0x88/0x178 [stmmac]
    [  174.651109]  stmmac_pltfr_remove+0x2c/0x80 [stmmac_platform]
    [  174.656925]  platform_remove+0x34/0x80
    [  174.660786]  device_remove+0x54/0x90
    [  174.664468]  device_release_driver_internal+0x1dc/0x240
    [  174.669834]  driver_detach+0x58/0xa8
    [  174.673514]  bus_remove_driver+0x74/0xd0
    [  174.677552]  driver_unregister+0x38/0x70
    [  174.681578]  platform_driver_unregister+0x1c/0x30
    [  174.686408]  qcom_ethqos_driver_exit+0x18/0x1b8 [dwmac_qcom_ethqos]
    [  174.692847]  __arm64_sys_delete_module+0x1a8/0x298
    [  174.697767]  invoke_syscall+0x50/0x128
    [  174.701617]  el0_svc_common.constprop.0+0xcc/0xf8
    [  174.706449]  do_el0_svc+0x40/0xa8
    [  174.709864]  el0_svc+0x2c/0x88
    [  174.713009]  el0t_64_sync_handler+0x100/0x130
    [  174.717482]  el0t_64_sync+0x190/0x198
    [  174.721919] qcom-ethqos 23040000.ethernet eth0: FPE workqueue stop
    [  174.779478] CPU: 5 PID: 584 Comm: modprobe Not tainted 6.4.0-rc7-next-20230622-00006-gb4d4b58e3c81-dirty #29
    [  174.789565] Hardware name: Qualcomm SA8775P Ride (DT)
    [  174.794754] Call trace:
    [  174.797267]  dump_backtrace+0x9c/0x100
    [  174.801123]  show_stack+0x20/0x38
    [  174.804528]  dump_stack_lvl+0x48/0x60
    [  174.808295]  dump_stack+0x18/0x28
    [  174.811700]  qcom_ethqos_serdes_powerdown+0x20/0x48 [dwmac_qcom_ethqos]
    [  174.818497]  stmmac_dvr_remove+0xa0/0x178 [stmmac]
    [  174.823429]  stmmac_pltfr_remove+0x2c/0x80 [stmmac_platform]
    [  174.829245]  platform_remove+0x34/0x80
    [  174.833097]  device_remove+0x54/0x90
    [  174.836772]  device_release_driver_internal+0x1dc/0x240
    [  174.842138]  driver_detach+0x58/0xa8
    [  174.845810]  bus_remove_driver+0x74/0xd0
    [  174.849841]  driver_unregister+0x38/0x70
    [  174.853870]  platform_driver_unregister+0x1c/0x30
    [  174.858702]  qcom_ethqos_driver_exit+0x18/0x1b8 [dwmac_qcom_ethqos]
    [  174.865140]  __arm64_sys_delete_module+0x1a8/0x298
    [  174.870061]  invoke_syscall+0x50/0x128
    [  174.873913]  el0_svc_common.constprop.0+0xcc/0xf8
    [  174.878745]  do_el0_svc+0x40/0xa8
    [  174.882153]  el0_svc+0x2c/0x88
    [  174.885292]  el0t_64_sync_handler+0x100/0x130
    [  174.889768]  el0t_64_sync+0x190/0x198

Need to figure out which one of those serdes_powerdown() calls to undo.

Thanks,
Andrew

Re: [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride

[Andrew Halaney]

On Thu, Jun 22, 2023 at 01:44:22PM -0500, Andrew Halaney wrote:
> On Thu, Jun 22, 2023 at 02:01:37PM +0200, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> > 
> > Bjorn,
> > 
> > Now that all other bits and pieces are in next, I'm resending the reviewed
> > DTS patches for pick up. This enables one of the 1Gb ethernet ports on
> > sa8775p-ride.
> > 
> > Bartosz Golaszewski (5):
> >   arm64: dts: qcom: sa8775p: add the SGMII PHY node
> >   arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
> >   arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
> >   arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
> >   arm64: dts: qcom: sa8775p-ride: enable ethernet0
> > 
> >  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 109 ++++++++++++++++++++++
> >  arch/arm64/boot/dts/qcom/sa8775p.dtsi     |  42 +++++++++
> >  2 files changed, 151 insertions(+)
> > 
> > -- 
> > 2.39.2
> > 
> 
> Tested-by: Andrew Halaney <ahalaney@redhat.com>
> 
> note, I did uncover a bug in stmmac (imo) wrt unbalanced calls to
> serdes_powerup/serdes_powerdown() which I plan on trying to fix shortly.
> 
> Not really related to any of the Qualcomm specific bits though. This
> looks good to me.
> 

Bart already sent a fix!

https://lore.kernel.org/netdev/20230621135537.376649-1-brgl@bgdev.pl/

Thanks,
Andrew

Re: [RESEND PATCH v2 0/5] arm64: dts: qcom: enable ethernet on sa8775p-ride

[Bjorn Andersson]

On Thu, 22 Jun 2023 14:01:37 +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Bjorn,
> 
> Now that all other bits and pieces are in next, I'm resending the reviewed
> DTS patches for pick up. This enables one of the 1Gb ethernet ports on
> sa8775p-ride.
> 
> [...]

Applied, thanks!

[1/5] arm64: dts: qcom: sa8775p: add the SGMII PHY node
      commit: 683ef77158cbb56ede2a524751b150cec340128a
[2/5] arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface
      commit: ff499a0fbb2352bff15d75c13afe46decf90d7eb
[3/5] arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY
      commit: 5ef26fb8b3ed72cc5beb6461c258127e3a388247
[4/5] arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0
      commit: 48c99529998026e21a78f84261d24c0b93c1027e
[5/5] arm64: dts: qcom: sa8775p-ride: enable ethernet0
      commit: 120ab6c06f69b39e54c949542fa85fd49ff51278

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>