[PATCH AUTOSEL 6.1 01/15] wifi: cfg80211: remove links only on AP

[PATCH AUTOSEL 6.1 01/15] wifi: cfg80211: remove links only on AP

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 34d4e3eb67fed9c19719bedb748e5a8b6ccc97a5 ]

Since links are only controlled by userspace via cfg80211
in AP mode, also only remove them from the driver in that
case.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.ed65b94916fa.I2458c46888284cc5ce30715fe642bc5fc4340c8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/util.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index 39680e7bad45a..f433f3fdd9e94 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -5,7 +5,7 @@
  * Copyright 2007-2009	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
  * Copyright 2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2022 Intel Corporation
+ * Copyright (C) 2018-2023 Intel Corporation
  */
 #include <linux/export.h>
 #include <linux/bitops.h>
@@ -2479,6 +2479,13 @@ void cfg80211_remove_links(struct wireless_dev *wdev)
 {
 	unsigned int link_id;
 
+	/*
+	 * links are controlled by upper layers (userspace/cfg)
+	 * only for AP mode, so only remove them here for AP
+	 */
+	if (wdev->iftype != NL80211_IFTYPE_AP)
+		return;
+
 	wdev_lock(wdev);
 	if (wdev->valid_links) {
 		for_each_valid_link(wdev, link_id)
-- 
2.39.2

[PATCH AUTOSEL 6.1 02/15] wifi: mac80211: Use active_links instead of valid_links in Tx

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 7b3b9ac899b54f53f7c9fc07e1c562f56b2187fa ]

Fix few places on the Tx path where the valid_links were used instead
of active links.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.e24832691fc8.I9ac10dc246d7798a8d26b1a94933df5668df63fc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/tx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 763cefd0cc268..2f9e1abdf375d 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -4391,7 +4391,7 @@ static void ieee80211_mlo_multicast_tx(struct net_device *dev,
 				       struct sk_buff *skb)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	unsigned long links = sdata->vif.valid_links;
+	unsigned long links = sdata->vif.active_links;
 	unsigned int link;
 	u32 ctrl_flags = IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX;
 
@@ -5827,7 +5827,7 @@ void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
 		rcu_read_unlock();
 
 		if (WARN_ON_ONCE(link == ARRAY_SIZE(sdata->vif.link_conf)))
-			link = ffs(sdata->vif.valid_links) - 1;
+			link = ffs(sdata->vif.active_links) - 1;
 	}
 
 	IEEE80211_SKB_CB(skb)->control.flags |=
@@ -5863,7 +5863,7 @@ void ieee80211_tx_skb_tid(struct ieee80211_sub_if_data *sdata,
 		band = chanctx_conf->def.chan->band;
 	} else {
 		WARN_ON(link_id >= 0 &&
-			!(sdata->vif.valid_links & BIT(link_id)));
+			!(sdata->vif.active_links & BIT(link_id)));
 		/* MLD transmissions must not rely on the band */
 		band = 0;
 	}
-- 
2.39.2

[PATCH AUTOSEL 6.1 03/15] netlabel: fix shift wrapping bug in netlbl_catmap_setlong()

[Sasha Levin]

From: Dmitry Mastykin <dmastykin@astralinux.ru>

[ Upstream commit b403643d154d15176b060b82f7fc605210033edd ]

There is a shift wrapping bug in this code on 32-bit architectures.
NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long.
Every second 32-bit word of catmap becomes corrupted.

Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlabel/netlabel_kapi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c
index 54c0830039470..27511c90a26f4 100644
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -857,7 +857,8 @@ int netlbl_catmap_setlong(struct netlbl_lsm_catmap **catmap,
 
 	offset -= iter->startbit;
 	idx = offset / NETLBL_CATMAP_MAPSIZE;
-	iter->bitmap[idx] |= bitmap << (offset % NETLBL_CATMAP_MAPSIZE);
+	iter->bitmap[idx] |= (NETLBL_CATMAP_MAPTYPE)bitmap
+			     << (offset % NETLBL_CATMAP_MAPSIZE);
 
 	return 0;
 }
-- 
2.39.2

[PATCH AUTOSEL 6.1 04/15] bnx2x: fix page fault following EEH recovery

[Sasha Levin]

From: David Christensen <drc@linux.vnet.ibm.com>

[ Upstream commit 7ebe4eda4265642859507d1b3ca330d8c196cfe5 ]

In the last step of the EEH recovery process, the EEH driver calls into
bnx2x_io_resume() to re-initialize the NIC hardware via the function
bnx2x_nic_load().  If an error occurs during bnx2x_nic_load(), OS and
hardware resources are released and an error code is returned to the
caller.  When called from bnx2x_io_resume(), the return code is ignored
and the network interface is brought up unconditionally.  Later attempts
to send a packet via this interface result in a page fault due to a null
pointer reference.

This patch checks the return code of bnx2x_nic_load(), prints an error
message if necessary, and does not enable the interface.

Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 51b1690fd0459..a1783faf4fe99 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -14312,11 +14312,16 @@ static void bnx2x_io_resume(struct pci_dev *pdev)
 	bp->fw_seq = SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
 							DRV_MSG_SEQ_NUMBER_MASK;
 
-	if (netif_running(dev))
-		bnx2x_nic_load(bp, LOAD_NORMAL);
+	if (netif_running(dev)) {
+		if (bnx2x_nic_load(bp, LOAD_NORMAL)) {
+			netdev_err(bp->dev, "Error during driver initialization, try unloading/reloading the driver\n");
+			goto done;
+		}
+	}
 
 	netif_device_attach(dev);
 
+done:
 	rtnl_unlock();
 }
 
-- 
2.39.2

[PATCH AUTOSEL 6.1 08/15] sctp: handle invalid error codes without calling BUG()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@linaro.org>

[ Upstream commit a0067dfcd9418fd3b0632bc59210d120d038a9c6 ]

The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition
values but if the call to sctp_ulpevent_make_authkey() fails, it returns
-ENOMEM.

This results in calling BUG() inside the sctp_side_effects() function.
Calling BUG() is an over reaction and not helpful.  Call WARN_ON_ONCE()
instead.

This code predates git.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/sm_sideeffect.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 463c4a58d2c36..970c6a486a9b0 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -1251,7 +1251,10 @@ static int sctp_side_effects(enum sctp_event_type event_type,
 	default:
 		pr_err("impossible disposition %d in state %d, event_type %d, event_id %d\n",
 		       status, state, event_type, subtype.chunk);
-		BUG();
+		error = status;
+		if (error >= 0)
+			error = -EINVAL;
+		WARN_ON_ONCE(1);
 		break;
 	}
 
-- 
2.39.2

[PATCH AUTOSEL 6.1 01/15] wifi: cfg80211: remove links only on AP

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 34d4e3eb67fed9c19719bedb748e5a8b6ccc97a5 ]

Since links are only controlled by userspace via cfg80211
in AP mode, also only remove them from the driver in that
case.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.ed65b94916fa.I2458c46888284cc5ce30715fe642bc5fc4340c8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/util.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index 39680e7bad45a..f433f3fdd9e94 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -5,7 +5,7 @@
  * Copyright 2007-2009	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
  * Copyright 2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2022 Intel Corporation
+ * Copyright (C) 2018-2023 Intel Corporation
  */
 #include <linux/export.h>
 #include <linux/bitops.h>
@@ -2479,6 +2479,13 @@ void cfg80211_remove_links(struct wireless_dev *wdev)
 {
 	unsigned int link_id;
 
+	/*
+	 * links are controlled by upper layers (userspace/cfg)
+	 * only for AP mode, so only remove them here for AP
+	 */
+	if (wdev->iftype != NL80211_IFTYPE_AP)
+		return;
+
 	wdev_lock(wdev);
 	if (wdev->valid_links) {
 		for_each_valid_link(wdev, link_id)
-- 
2.40.1

[PATCH AUTOSEL 6.1 02/15] wifi: mac80211: Use active_links instead of valid_links in Tx

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 7b3b9ac899b54f53f7c9fc07e1c562f56b2187fa ]

Fix few places on the Tx path where the valid_links were used instead
of active links.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230608163202.e24832691fc8.I9ac10dc246d7798a8d26b1a94933df5668df63fc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/tx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 763cefd0cc268..2f9e1abdf375d 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -4391,7 +4391,7 @@ static void ieee80211_mlo_multicast_tx(struct net_device *dev,
 				       struct sk_buff *skb)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	unsigned long links = sdata->vif.valid_links;
+	unsigned long links = sdata->vif.active_links;
 	unsigned int link;
 	u32 ctrl_flags = IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX;
 
@@ -5827,7 +5827,7 @@ void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
 		rcu_read_unlock();
 
 		if (WARN_ON_ONCE(link == ARRAY_SIZE(sdata->vif.link_conf)))
-			link = ffs(sdata->vif.valid_links) - 1;
+			link = ffs(sdata->vif.active_links) - 1;
 	}
 
 	IEEE80211_SKB_CB(skb)->control.flags |=
@@ -5863,7 +5863,7 @@ void ieee80211_tx_skb_tid(struct ieee80211_sub_if_data *sdata,
 		band = chanctx_conf->def.chan->band;
 	} else {
 		WARN_ON(link_id >= 0 &&
-			!(sdata->vif.valid_links & BIT(link_id)));
+			!(sdata->vif.active_links & BIT(link_id)));
 		/* MLD transmissions must not rely on the band */
 		band = 0;
 	}
-- 
2.40.1