From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, netdev@vger.kernel.org
Cc: Ivan Vecera <ivecera@redhat.com>,
anthony.l.nguyen@intel.com, leon@kernel.org,
simon.horman@corigine.com, Ma Yuying <yuma@redhat.com>
Subject: [PATCH net-next v2 2/2] i40e: Wait for pending VF reset in VF set callbacks
Date: Fri, 14 Jul 2023 13:12:53 -0700 [thread overview]
Message-ID: <20230714201253.1717957-3-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20230714201253.1717957-1-anthony.l.nguyen@intel.com>
From: Ivan Vecera <ivecera@redhat.com>
Commit 028daf80117376 ("i40e: Fix attach VF to VM issue") fixed
a race between i40e_ndo_set_vf_mac() and i40e_reset_vf() during
an attachment of VF device to VM. This issue is not related to
setting MAC address only but also VLAN assignment to particular
VF because the newer libvirt sets configured MAC address as well
as an optional VLAN. The same behavior is also for i40e's
.ndo_set_vf_rate and .ndo_set_vf_spoofchk where the callbacks
just check if the VF was initialized but not wait for the finish
of pending reset.
Reproducer:
[root@host ~]# virsh attach-interface guest hostdev --managed 0000:02:02.0 --mac 52:54:00:b4:aa:bb
error: Failed to attach interface
error: Cannot set interface MAC/vlanid to 52:54:00:b4:aa:bb/0 for ifname enp2s0f0 vf 0: Resource temporarily unavailable
Fix this issue by using i40e_check_vf_init_timeout() helper to check
whether a reset of particular VF was finished in i40e's
.ndo_set_vf_vlan, .ndo_set_vf_rate and .ndo_set_vf_spoofchk callbacks.
Tested-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
.../net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index b203465357af..398fb4854cbe 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -4468,13 +4468,11 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
}
vf = &pf->vf[vf_id];
- vsi = pf->vsi[vf->lan_vsi_idx];
- if (!test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) {
- dev_err(&pf->pdev->dev, "VF %d still in reset. Try again.\n",
- vf_id);
+ if (!i40e_check_vf_init_timeout(vf)) {
ret = -EAGAIN;
goto error_pvid;
}
+ vsi = pf->vsi[vf->lan_vsi_idx];
if (le16_to_cpu(vsi->info.pvid) == vlanprio)
/* duplicate request, so just return success */
@@ -4618,13 +4616,11 @@ int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int min_tx_rate,
}
vf = &pf->vf[vf_id];
- vsi = pf->vsi[vf->lan_vsi_idx];
- if (!test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) {
- dev_err(&pf->pdev->dev, "VF %d still in reset. Try again.\n",
- vf_id);
+ if (!i40e_check_vf_init_timeout(vf)) {
ret = -EAGAIN;
goto error;
}
+ vsi = pf->vsi[vf->lan_vsi_idx];
ret = i40e_set_bw_limit(vsi, vsi->seid, max_tx_rate);
if (ret)
@@ -4791,9 +4787,7 @@ int i40e_ndo_set_vf_spoofchk(struct net_device *netdev, int vf_id, bool enable)
}
vf = &(pf->vf[vf_id]);
- if (!test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) {
- dev_err(&pf->pdev->dev, "VF %d still in reset. Try again.\n",
- vf_id);
+ if (!i40e_check_vf_init_timeout(vf)) {
ret = -EAGAIN;
goto out;
}
--
2.38.1
next prev parent reply other threads:[~2023-07-14 20:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-14 20:12 [PATCH net-next v2 0/2][pull request] Intel Wired LAN Driver Updates 2023-07-14 (i40e) Tony Nguyen
2023-07-14 20:12 ` [PATCH net-next v2 1/2] i40e: Add helper for VF inited state check with timeout Tony Nguyen
2023-07-14 20:12 ` Tony Nguyen [this message]
2023-07-18 10:14 ` [PATCH net-next v2 0/2][pull request] Intel Wired LAN Driver Updates 2023-07-14 (i40e) Paolo Abeni
2023-07-18 17:04 ` Tony Nguyen
2023-07-21 14:10 ` Ivan Vecera
2023-07-19 11:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230714201253.1717957-3-anthony.l.nguyen@intel.com \
--to=anthony.l.nguyen@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=ivecera@redhat.com \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=simon.horman@corigine.com \
--cc=yuma@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).