From: Christoph Hellwig <hch@lst.de>
To: Luis Chamberlain <mcgrof@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Ulf Hansson <ulf.hansson@linaro.org>,
Manuel Lauss <manuel.lauss@gmail.com>,
Yangbo Lu <yangbo.lu@nxp.com>, Joshua Kinard <kumba@gentoo.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org (open list),
linux-mmc@vger.kernel.org, netdev@vger.kernel.org,
linux-rtc@vger.kernel.org, linux-modules@vger.kernel.org
Subject: [PATCH 1/5] ARM: pxa: remove use of symbol_get()
Date: Tue, 1 Aug 2023 19:35:40 +0200 [thread overview]
Message-ID: <20230801173544.1929519-2-hch@lst.de> (raw)
In-Reply-To: <20230801173544.1929519-1-hch@lst.de>
From: Arnd Bergmann <arnd@arndb.de>
The spitz board file uses the obscure symbol_get() function
to optionally call a function from sharpsl_pm.c if that is
built. However, the two files are always built together
these days, and have been for a long time, so this can
be changed to a normal function call.
Link: https://lore.kernel.org/lkml/20230731162639.GA9441@lst.de/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/arm/mach-pxa/sharpsl_pm.c | 2 --
arch/arm/mach-pxa/spitz.c | 14 +-------------
2 files changed, 1 insertion(+), 15 deletions(-)
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index d29bdcd5270e0f..72fa2e3fd35318 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -216,8 +216,6 @@ void sharpsl_battery_kick(void)
{
schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
static void sharpsl_battery_thread(struct work_struct *private_)
{
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d01ea54b0b7820..cc691b199429ca 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -9,7 +9,6 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h> /* symbol_get ; symbol_put */
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
@@ -518,17 +517,6 @@ static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
},
};
-static void spitz_bl_kick_battery(void)
-{
- void (*kick_batt)(void);
-
- kick_batt = symbol_get(sharpsl_battery_kick);
- if (kick_batt) {
- kick_batt();
- symbol_put(sharpsl_battery_kick);
- }
-}
-
static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
.dev_id = "spi2.1",
.table = {
@@ -556,7 +544,7 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
.max_intensity = 0x2f,
.default_intensity = 0x1f,
.limit_mask = 0x0b,
- .kick_battery = spitz_bl_kick_battery,
+ .kick_battery = sharpsl_battery_kick,
};
static struct spi_board_info spitz_spi_devices[] = {
--
2.39.2
next prev parent reply other threads:[~2023-08-01 17:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-01 17:35 require EXPORT_SYMBOL_GPL symbols for symbol_get v2 Christoph Hellwig
2023-08-01 17:35 ` Christoph Hellwig [this message]
2023-08-01 17:35 ` [PATCH 2/5] mmc: au1xmmc: force non-modular build and remove symbol_get usage Christoph Hellwig
2023-08-02 7:12 ` Manuel Lauss
2023-08-02 8:31 ` Arnd Bergmann
2023-08-08 9:15 ` Ulf Hansson
2023-08-01 17:35 ` [PATCH 3/5] net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index Christoph Hellwig
2023-08-01 17:35 ` [PATCH 4/5] rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff Christoph Hellwig
2023-08-01 17:35 ` [PATCH 5/5] modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules Christoph Hellwig
2023-10-18 0:30 ` David Woodhouse
2023-10-18 5:31 ` Christoph Hellwig
2023-10-18 18:25 ` Luis Chamberlain
2023-08-01 17:45 ` require EXPORT_SYMBOL_GPL symbols for symbol_get v2 Luis Chamberlain
2023-08-02 11:56 ` Christoph Hellwig
2023-08-02 18:19 ` Luis Chamberlain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230801173544.1929519-2-hch@lst.de \
--to=hch@lst.de \
--cc=arnd@arndb.de \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel@zonque.org \
--cc=gregkh@linuxfoundation.org \
--cc=haojian.zhuang@gmail.com \
--cc=kumba@gentoo.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-modules@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=manuel.lauss@gmail.com \
--cc=mcgrof@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robert.jarzmik@free.fr \
--cc=ulf.hansson@linaro.org \
--cc=yangbo.lu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).