From: Christoph Hellwig <hch@lst.de>
To: Luis Chamberlain <mcgrof@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Ulf Hansson <ulf.hansson@linaro.org>,
Manuel Lauss <manuel.lauss@gmail.com>,
Yangbo Lu <yangbo.lu@nxp.com>, Joshua Kinard <kumba@gentoo.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
Arnd Bergmann <arnd@arndb.de>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org (open list),
linux-mmc@vger.kernel.org, netdev@vger.kernel.org,
linux-rtc@vger.kernel.org, linux-modules@vger.kernel.org
Subject: [PATCH 2/5] mmc: au1xmmc: force non-modular build and remove symbol_get usage
Date: Tue, 1 Aug 2023 19:35:41 +0200 [thread overview]
Message-ID: <20230801173544.1929519-3-hch@lst.de> (raw)
In-Reply-To: <20230801173544.1929519-1-hch@lst.de>
au1xmmc is split somewhat awkwardly into the main mmc subsystem driver,
and callbacks in platform_data that sit under arch/mips/ and are
always built in. The latter than call mmc_detect_change through
symbol_get. Remove the use of symbol_get by requiring the driver
to be built in. In the future the interrupt handlers for card
insert/eject detection should probably be moved into the main driver,
and which point it can be built modular again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/mips/alchemy/devboards/db1000.c | 8 +-------
arch/mips/alchemy/devboards/db1200.c | 19 ++-----------------
arch/mips/alchemy/devboards/db1300.c | 10 +---------
drivers/mmc/host/Kconfig | 4 ++--
4 files changed, 6 insertions(+), 35 deletions(-)
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 79d66faa84828d..012da042d0a4f7 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -14,7 +14,6 @@
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
-#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/spi/spi.h>
@@ -167,12 +166,7 @@ static struct platform_device db1x00_audio_dev = {
static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
- /* link against CONFIG_MMC=m */
- mmc_cd = symbol_get(mmc_detect_change);
- mmc_cd(ptr, msecs_to_jiffies(500));
- symbol_put(mmc_detect_change);
-
+ mmc_detect_change(ptr, msecs_to_jiffies(500));
return IRQ_HANDLED;
}
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 1864eb935ca57f..76080c71a2a7b6 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -10,7 +10,6 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/leds.h>
@@ -340,14 +339,7 @@ static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
-
- /* link against CONFIG_MMC=m */
- mmc_cd = symbol_get(mmc_detect_change);
- if (mmc_cd) {
- mmc_cd(ptr, msecs_to_jiffies(200));
- symbol_put(mmc_detect_change);
- }
+ mmc_detect_change(ptr, msecs_to_jiffies(200));
msleep(100); /* debounce */
if (irq == DB1200_SD0_INSERT_INT)
@@ -431,14 +423,7 @@ static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
-
- /* link against CONFIG_MMC=m */
- mmc_cd = symbol_get(mmc_detect_change);
- if (mmc_cd) {
- mmc_cd(ptr, msecs_to_jiffies(200));
- symbol_put(mmc_detect_change);
- }
+ mmc_detect_change(ptr, msecs_to_jiffies(200));
msleep(100); /* debounce */
if (irq == PB1200_SD1_INSERT_INT)
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index e70e529ddd914d..ff61901329c626 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -17,7 +17,6 @@
#include <linux/interrupt.h>
#include <linux/ata_platform.h>
#include <linux/mmc/host.h>
-#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/platnand.h>
#include <linux/platform_device.h>
@@ -459,14 +458,7 @@ static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
{
- void (*mmc_cd)(struct mmc_host *, unsigned long);
-
- /* link against CONFIG_MMC=m. We can only be called once MMC core has
- * initialized the controller, so symbol_get() should always succeed.
- */
- mmc_cd = symbol_get(mmc_detect_change);
- mmc_cd(ptr, msecs_to_jiffies(200));
- symbol_put(mmc_detect_change);
+ mmc_detect_change(ptr, msecs_to_jiffies(200));
msleep(100); /* debounce */
if (irq == DB1300_SD1_INSERT_INT)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 159a3e9490aed8..f7afd179dd10bf 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -526,11 +526,11 @@ config MMC_ALCOR
of Alcor Micro PCI-E card reader
config MMC_AU1X
- tristate "Alchemy AU1XX0 MMC Card Interface support"
+ bool "Alchemy AU1XX0 MMC Card Interface support"
depends on MIPS_ALCHEMY
help
This selects the AMD Alchemy(R) Multimedia card interface.
- If you have a Alchemy platform with a MMC slot, say Y or M here.
+ If you have a Alchemy platform with a MMC slot, say Y here.
If unsure, say N.
--
2.39.2
next prev parent reply other threads:[~2023-08-01 17:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-01 17:35 require EXPORT_SYMBOL_GPL symbols for symbol_get v2 Christoph Hellwig
2023-08-01 17:35 ` [PATCH 1/5] ARM: pxa: remove use of symbol_get() Christoph Hellwig
2023-08-01 17:35 ` Christoph Hellwig [this message]
2023-08-02 7:12 ` [PATCH 2/5] mmc: au1xmmc: force non-modular build and remove symbol_get usage Manuel Lauss
2023-08-02 8:31 ` Arnd Bergmann
2023-08-08 9:15 ` Ulf Hansson
2023-08-01 17:35 ` [PATCH 3/5] net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index Christoph Hellwig
2023-08-01 17:35 ` [PATCH 4/5] rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff Christoph Hellwig
2023-08-01 17:35 ` [PATCH 5/5] modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules Christoph Hellwig
2023-10-18 0:30 ` David Woodhouse
2023-10-18 5:31 ` Christoph Hellwig
2023-10-18 18:25 ` Luis Chamberlain
2023-08-01 17:45 ` require EXPORT_SYMBOL_GPL symbols for symbol_get v2 Luis Chamberlain
2023-08-02 11:56 ` Christoph Hellwig
2023-08-02 18:19 ` Luis Chamberlain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230801173544.1929519-3-hch@lst.de \
--to=hch@lst.de \
--cc=arnd@arndb.de \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel@zonque.org \
--cc=gregkh@linuxfoundation.org \
--cc=haojian.zhuang@gmail.com \
--cc=kumba@gentoo.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-modules@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=manuel.lauss@gmail.com \
--cc=mcgrof@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robert.jarzmik@free.fr \
--cc=ulf.hansson@linaro.org \
--cc=yangbo.lu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).