[PATCH net-next 0/9] pull-request: can-next 2023-08-03

[PATCH net-next 0/9] pull-request: can-next 2023-08-03

[Marc Kleine-Budde]

Hello netdev-team,

this is a pull request of 9 patches for net-next/master.

The 1st patch is by Ruan Jinjie, targets the flexcan driver, and
cleans up the error handling of platform_get_irq() in the
flexcan_probe() function.

Markus Schneider-Pargmann contributes 6 patches for the tcan4x5x M_CAN
driver, consisting of some cleanups, and adding support for the
tcan4552/4553 chips.

Another patch by Ruan Jinjie, that cleans up the error path of
platform_get_irq() in the c_can_plat_probe() function of the C_CAN
platform driver.

The last patch is by Frank Jungclaus and adds support for the
CAN-USB/3 and CAN FD to the ESD USB CAN driver.

regards,
Marc

---

The following changes since commit 2b3082c6ef3b0104d822f6f18d2afbe5fc9a5c2c:

  net: flow_dissector: Use 64bits for used_keys (2023-07-31 09:11:24 +0100)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git tags/linux-can-next-for-6.6-20230803

for you to fetch changes up to 806e95aee5440a9fbe155c3822e1422ba6a90478:

  Merge patch "can: esd_usb: Add support for esd CAN-USB/3" (2023-08-03 09:24:33 +0200)

----------------------------------------------------------------
linux-can-next-for-6.6-20230803

----------------------------------------------------------------
Frank Jungclaus (1):
      can: esd_usb: Add support for esd CAN-USB/3

Marc Kleine-Budde (2):
      Merge patch series "can: tcan4x5x: Introduce tcan4552/4553"
      Merge patch "can: esd_usb: Add support for esd CAN-USB/3"

Markus Schneider-Pargmann (6):
      dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
      can: tcan4x5x: Remove reserved register 0x814 from writable table
      can: tcan4x5x: Check size of mram configuration
      can: tcan4x5x: Rename ID registers to match datasheet
      can: tcan4x5x: Add support for tcan4552/4553
      can: tcan4x5x: Add error messages in probe

Ruan Jinjie (2):
      can: flexcan: fix the return value handle for platform_get_irq()
      can: c_can: Do not check for 0 return after calling platform_get_irq()

 .../devicetree/bindings/net/can/tcan4x5x.txt       |  11 +-
 drivers/net/can/c_can/c_can_platform.c             |   4 +-
 drivers/net/can/flexcan/flexcan-core.c             |  12 +-
 drivers/net/can/m_can/m_can.c                      |  16 ++
 drivers/net/can/m_can/m_can.h                      |   1 +
 drivers/net/can/m_can/tcan4x5x-core.c              | 142 +++++++++--
 drivers/net/can/m_can/tcan4x5x-regmap.c            |   1 -
 drivers/net/can/usb/esd_usb.c                      | 275 ++++++++++++++++++---
 8 files changed, 397 insertions(+), 65 deletions(-)

[PATCH net-next 1/9] can: flexcan: fix the return value handle for platform_get_irq()

[Marc Kleine-Budde]

From: Ruan Jinjie <ruanjinjie@huawei.com>

There is no possible for platform_get_irq() to return 0
and the return value of platform_get_irq() is more sensible
to show the error reason.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/all/20230731075252.359965-1-ruanjinjie@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/flexcan/flexcan-core.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
index 48273d51f271..add39e922b89 100644
--- a/drivers/net/can/flexcan/flexcan-core.c
+++ b/drivers/net/can/flexcan/flexcan-core.c
@@ -2089,8 +2089,8 @@ static int flexcan_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0)
-		return -ENODEV;
+	if (irq < 0)
+		return irq;
 
 	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs))
@@ -2167,13 +2167,13 @@ static int flexcan_probe(struct platform_device *pdev)
 
 	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
 		priv->irq_boff = platform_get_irq(pdev, 1);
-		if (priv->irq_boff <= 0) {
-			err = -ENODEV;
+		if (priv->irq_boff < 0) {
+			err = priv->irq_boff;
 			goto failed_platform_get_irq;
 		}
 		priv->irq_err = platform_get_irq(pdev, 2);
-		if (priv->irq_err <= 0) {
-			err = -ENODEV;
+		if (priv->irq_err < 0) {
+			err = priv->irq_err;
 			goto failed_platform_get_irq;
 		}
 	}

base-commit: 2b3082c6ef3b0104d822f6f18d2afbe5fc9a5c2c
-- 
2.40.1

[PATCH net-next 2/9] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants

[Marc Kleine-Budde]

From: Markus Schneider-Pargmann <msp@baylibre.com>

These two new chips do not have state or wake pins.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230728141923.162477-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 .../devicetree/bindings/net/can/tcan4x5x.txt          | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index e3501bfa22e9..170e23f0610d 100644
--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -4,7 +4,10 @@ Texas Instruments TCAN4x5x CAN Controller
 This file provides device node information for the TCAN4x5x interface contains.
 
 Required properties:
-	- compatible: "ti,tcan4x5x"
+	- compatible:
+		"ti,tcan4552", "ti,tcan4x5x"
+		"ti,tcan4553", "ti,tcan4x5x" or
+		"ti,tcan4x5x"
 	- reg: 0
 	- #address-cells: 1
 	- #size-cells: 0
@@ -21,8 +24,10 @@ Optional properties:
 	- reset-gpios: Hardwired output GPIO. If not defined then software
 		       reset.
 	- device-state-gpios: Input GPIO that indicates if the device is in
-			      a sleep state or if the device is active.
-	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
+			      a sleep state or if the device is active. Not
+			      available with tcan4552/4553.
+	- device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not
+			     available with tcan4552/4553.
 
 Example:
 tcan4x5x: tcan4x5x@0 {
-- 
2.40.1

[PATCH net-next 3/9] can: tcan4x5x: Remove reserved register 0x814 from writable table

[Marc Kleine-Budde]

From: Markus Schneider-Pargmann <msp@baylibre.com>

The mentioned register is not writable. It is reserved and should not be
written.

Fixes: 39dbb21b6a29 ("can: tcan4x5x: Specify separate read/write ranges")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/all/20230728141923.162477-3-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/m_can/tcan4x5x-regmap.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/can/m_can/tcan4x5x-regmap.c b/drivers/net/can/m_can/tcan4x5x-regmap.c
index 2b218ce04e9f..fafa6daa67e6 100644
--- a/drivers/net/can/m_can/tcan4x5x-regmap.c
+++ b/drivers/net/can/m_can/tcan4x5x-regmap.c
@@ -95,7 +95,6 @@ static const struct regmap_range tcan4x5x_reg_table_wr_range[] = {
 	regmap_reg_range(0x000c, 0x0010),
 	/* Device configuration registers and Interrupt Flags*/
 	regmap_reg_range(0x0800, 0x080c),
-	regmap_reg_range(0x0814, 0x0814),
 	regmap_reg_range(0x0820, 0x0820),
 	regmap_reg_range(0x0830, 0x0830),
 	/* M_CAN */
-- 
2.40.1

[PATCH net-next 4/9] can: tcan4x5x: Check size of mram configuration

[Marc Kleine-Budde]

From: Markus Schneider-Pargmann <msp@baylibre.com>

To reduce debugging effort in case the mram is misconfigured, add this
size check of the DT configuration. Currently if the mram configuration
doesn't fit into the available MRAM it just overwrites other areas of
the MRAM.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/all/20230728141923.162477-4-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/m_can/m_can.c         | 16 ++++++++++++++++
 drivers/net/can/m_can/m_can.h         |  1 +
 drivers/net/can/m_can/tcan4x5x-core.c |  5 +++++
 3 files changed, 22 insertions(+)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index d204703521d2..16ecc11c7f62 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1913,6 +1913,22 @@ static int register_m_can_dev(struct net_device *dev)
 	return register_candev(dev);
 }
 
+int m_can_check_mram_cfg(struct m_can_classdev *cdev, u32 mram_max_size)
+{
+	u32 total_size;
+
+	total_size = cdev->mcfg[MRAM_TXB].off - cdev->mcfg[MRAM_SIDF].off +
+			cdev->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
+	if (total_size > mram_max_size) {
+		dev_err(cdev->dev, "Total size of mram config(%u) exceeds mram(%u)\n",
+			total_size, mram_max_size);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(m_can_check_mram_cfg);
+
 static void m_can_of_parse_mram(struct m_can_classdev *cdev,
 				const u32 *mram_config_vals)
 {
diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
index c543928c756f..520e14277dff 100644
--- a/drivers/net/can/m_can/m_can.h
+++ b/drivers/net/can/m_can/m_can.h
@@ -103,6 +103,7 @@ int m_can_class_register(struct m_can_classdev *cdev);
 void m_can_class_unregister(struct m_can_classdev *cdev);
 int m_can_class_get_clocks(struct m_can_classdev *cdev);
 int m_can_init_ram(struct m_can_classdev *priv);
+int m_can_check_mram_cfg(struct m_can_classdev *cdev, u32 mram_max_size);
 
 int m_can_class_suspend(struct device *dev);
 int m_can_class_resume(struct device *dev);
diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
index 2342aa011647..e706518176e4 100644
--- a/drivers/net/can/m_can/tcan4x5x-core.c
+++ b/drivers/net/can/m_can/tcan4x5x-core.c
@@ -80,6 +80,7 @@
 	 TCAN4X5X_MCAN_IR_RF1F)
 
 #define TCAN4X5X_MRAM_START 0x8000
+#define TCAN4X5X_MRAM_SIZE 0x800
 #define TCAN4X5X_MCAN_OFFSET 0x1000
 
 #define TCAN4X5X_CLEAR_ALL_INT 0xffffffff
@@ -307,6 +308,10 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 	if (!mcan_class)
 		return -ENOMEM;
 
+	ret = m_can_check_mram_cfg(mcan_class, TCAN4X5X_MRAM_SIZE);
+	if (ret)
+		goto out_m_can_class_free_dev;
+
 	priv = cdev_to_priv(mcan_class);
 
 	priv->power = devm_regulator_get_optional(&spi->dev, "vsup");
-- 
2.40.1

[PATCH net-next 5/9] can: tcan4x5x: Rename ID registers to match datasheet

[Marc Kleine-Budde]

From: Markus Schneider-Pargmann <msp@baylibre.com>

The datasheet calls these registers ID1 and ID2. Rename these to avoid
confusion.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/all/20230728141923.162477-5-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/m_can/tcan4x5x-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
index e706518176e4..fb9375fa20ec 100644
--- a/drivers/net/can/m_can/tcan4x5x-core.c
+++ b/drivers/net/can/m_can/tcan4x5x-core.c
@@ -6,8 +6,8 @@
 
 #define TCAN4X5X_EXT_CLK_DEF 40000000
 
-#define TCAN4X5X_DEV_ID0 0x00
-#define TCAN4X5X_DEV_ID1 0x04
+#define TCAN4X5X_DEV_ID1 0x00
+#define TCAN4X5X_DEV_ID2 0x04
 #define TCAN4X5X_REV 0x08
 #define TCAN4X5X_STATUS 0x0C
 #define TCAN4X5X_ERROR_STATUS_MASK 0x10
-- 
2.40.1

[PATCH net-next 6/9] can: tcan4x5x: Add support for tcan4552/4553

[Marc Kleine-Budde]

From: Markus Schneider-Pargmann <msp@baylibre.com>

tcan4552 and tcan4553 do not have wake or state pins, so they are
currently not compatible with the generic driver. The generic driver
uses tcan4x5x_disable_state() and tcan4x5x_disable_wake() if the gpios
are not defined. These functions use register bits that are not
available in tcan4552/4553.

This patch adds support by introducing version information to reflect if
the chip has wake and state pins. Also the version is now checked.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20230728141923.162477-6-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/m_can/tcan4x5x-core.c | 104 ++++++++++++++++++++++----
 1 file changed, 90 insertions(+), 14 deletions(-)

diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
index fb9375fa20ec..2d329b4e4f52 100644
--- a/drivers/net/can/m_can/tcan4x5x-core.c
+++ b/drivers/net/can/m_can/tcan4x5x-core.c
@@ -7,6 +7,7 @@
 #define TCAN4X5X_EXT_CLK_DEF 40000000
 
 #define TCAN4X5X_DEV_ID1 0x00
+#define TCAN4X5X_DEV_ID1_TCAN 0x4e414354 /* ASCII TCAN */
 #define TCAN4X5X_DEV_ID2 0x04
 #define TCAN4X5X_REV 0x08
 #define TCAN4X5X_STATUS 0x0C
@@ -103,6 +104,37 @@
 #define TCAN4X5X_WD_3_S_TIMER BIT(29)
 #define TCAN4X5X_WD_6_S_TIMER (BIT(28) | BIT(29))
 
+struct tcan4x5x_version_info {
+	const char *name;
+	u32 id2_register;
+
+	bool has_wake_pin;
+	bool has_state_pin;
+};
+
+enum {
+	TCAN4552 = 0,
+	TCAN4553,
+	TCAN4X5X,
+};
+
+static const struct tcan4x5x_version_info tcan4x5x_versions[] = {
+	[TCAN4552] = {
+		.name = "4552",
+		.id2_register = 0x32353534,
+	},
+	[TCAN4553] = {
+		.name = "4553",
+		.id2_register = 0x32353534,
+	},
+	/* generic version with no id2_register at the end */
+	[TCAN4X5X] = {
+		.name = "generic",
+		.has_wake_pin = true,
+		.has_state_pin = true,
+	},
+};
+
 static inline struct tcan4x5x_priv *cdev_to_priv(struct m_can_classdev *cdev)
 {
 	return container_of(cdev, struct tcan4x5x_priv, cdev);
@@ -254,18 +286,53 @@ static int tcan4x5x_disable_state(struct m_can_classdev *cdev)
 				  TCAN4X5X_DISABLE_INH_MSK, 0x01);
 }
 
-static int tcan4x5x_get_gpios(struct m_can_classdev *cdev)
+static const struct tcan4x5x_version_info
+*tcan4x5x_find_version(struct tcan4x5x_priv *priv)
+{
+	u32 val;
+	int ret;
+
+	ret = regmap_read(priv->regmap, TCAN4X5X_DEV_ID1, &val);
+	if (ret)
+		return ERR_PTR(ret);
+
+	if (val != TCAN4X5X_DEV_ID1_TCAN) {
+		dev_err(&priv->spi->dev, "Not a tcan device %x\n", val);
+		return ERR_PTR(-ENODEV);
+	}
+
+	ret = regmap_read(priv->regmap, TCAN4X5X_DEV_ID2, &val);
+	if (ret)
+		return ERR_PTR(ret);
+
+	for (int i = 0; i != ARRAY_SIZE(tcan4x5x_versions); ++i) {
+		const struct tcan4x5x_version_info *vinfo = &tcan4x5x_versions[i];
+
+		if (!vinfo->id2_register || val == vinfo->id2_register) {
+			dev_info(&priv->spi->dev, "Detected TCAN device version %s\n",
+				 vinfo->name);
+			return vinfo;
+		}
+	}
+
+	return &tcan4x5x_versions[TCAN4X5X];
+}
+
+static int tcan4x5x_get_gpios(struct m_can_classdev *cdev,
+			      const struct tcan4x5x_version_info *version_info)
 {
 	struct tcan4x5x_priv *tcan4x5x = cdev_to_priv(cdev);
 	int ret;
 
-	tcan4x5x->device_wake_gpio = devm_gpiod_get(cdev->dev, "device-wake",
-						    GPIOD_OUT_HIGH);
-	if (IS_ERR(tcan4x5x->device_wake_gpio)) {
-		if (PTR_ERR(tcan4x5x->device_wake_gpio) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
+	if (version_info->has_wake_pin) {
+		tcan4x5x->device_wake_gpio = devm_gpiod_get(cdev->dev, "device-wake",
+							    GPIOD_OUT_HIGH);
+		if (IS_ERR(tcan4x5x->device_wake_gpio)) {
+			if (PTR_ERR(tcan4x5x->device_wake_gpio) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
 
-		tcan4x5x_disable_wake(cdev);
+			tcan4x5x_disable_wake(cdev);
+		}
 	}
 
 	tcan4x5x->reset_gpio = devm_gpiod_get_optional(cdev->dev, "reset",
@@ -277,12 +344,14 @@ static int tcan4x5x_get_gpios(struct m_can_classdev *cdev)
 	if (ret)
 		return ret;
 
-	tcan4x5x->device_state_gpio = devm_gpiod_get_optional(cdev->dev,
-							      "device-state",
-							      GPIOD_IN);
-	if (IS_ERR(tcan4x5x->device_state_gpio)) {
-		tcan4x5x->device_state_gpio = NULL;
-		tcan4x5x_disable_state(cdev);
+	if (version_info->has_state_pin) {
+		tcan4x5x->device_state_gpio = devm_gpiod_get_optional(cdev->dev,
+								      "device-state",
+								      GPIOD_IN);
+		if (IS_ERR(tcan4x5x->device_state_gpio)) {
+			tcan4x5x->device_state_gpio = NULL;
+			tcan4x5x_disable_state(cdev);
+		}
 	}
 
 	return 0;
@@ -299,6 +368,7 @@ static struct m_can_ops tcan4x5x_ops = {
 
 static int tcan4x5x_can_probe(struct spi_device *spi)
 {
+	const struct tcan4x5x_version_info *version_info;
 	struct tcan4x5x_priv *priv;
 	struct m_can_classdev *mcan_class;
 	int freq, ret;
@@ -361,7 +431,13 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 	if (ret)
 		goto out_m_can_class_free_dev;
 
-	ret = tcan4x5x_get_gpios(mcan_class);
+	version_info = tcan4x5x_find_version(priv);
+	if (IS_ERR(version_info)) {
+		ret = PTR_ERR(version_info);
+		goto out_power;
+	}
+
+	ret = tcan4x5x_get_gpios(mcan_class, version_info);
 	if (ret)
 		goto out_power;
 
-- 
2.40.1

[PATCH net-next 7/9] can: tcan4x5x: Add error messages in probe

[Marc Kleine-Budde]

From: Markus Schneider-Pargmann <msp@baylibre.com>

To be able to understand issues during probe easier, add error messages
if something fails.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20230728141923.162477-7-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/m_can/tcan4x5x-core.c | 29 +++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/m_can/tcan4x5x-core.c b/drivers/net/can/m_can/tcan4x5x-core.c
index 2d329b4e4f52..8a4143809d33 100644
--- a/drivers/net/can/m_can/tcan4x5x-core.c
+++ b/drivers/net/can/m_can/tcan4x5x-core.c
@@ -402,6 +402,8 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 
 	/* Sanity check */
 	if (freq < 20000000 || freq > TCAN4X5X_EXT_CLK_DEF) {
+		dev_err(&spi->dev, "Clock frequency is out of supported range %d\n",
+			freq);
 		ret = -ERANGE;
 		goto out_m_can_class_free_dev;
 	}
@@ -420,16 +422,23 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 	/* Configure the SPI bus */
 	spi->bits_per_word = 8;
 	ret = spi_setup(spi);
-	if (ret)
+	if (ret) {
+		dev_err(&spi->dev, "SPI setup failed %pe\n", ERR_PTR(ret));
 		goto out_m_can_class_free_dev;
+	}
 
 	ret = tcan4x5x_regmap_init(priv);
-	if (ret)
+	if (ret) {
+		dev_err(&spi->dev, "regmap init failed %pe\n", ERR_PTR(ret));
 		goto out_m_can_class_free_dev;
+	}
 
 	ret = tcan4x5x_power_enable(priv->power, 1);
-	if (ret)
+	if (ret) {
+		dev_err(&spi->dev, "Enabling regulator failed %pe\n",
+			ERR_PTR(ret));
 		goto out_m_can_class_free_dev;
+	}
 
 	version_info = tcan4x5x_find_version(priv);
 	if (IS_ERR(version_info)) {
@@ -438,16 +447,24 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 	}
 
 	ret = tcan4x5x_get_gpios(mcan_class, version_info);
-	if (ret)
+	if (ret) {
+		dev_err(&spi->dev, "Getting gpios failed %pe\n", ERR_PTR(ret));
 		goto out_power;
+	}
 
 	ret = tcan4x5x_init(mcan_class);
-	if (ret)
+	if (ret) {
+		dev_err(&spi->dev, "tcan initialization failed %pe\n",
+			ERR_PTR(ret));
 		goto out_power;
+	}
 
 	ret = m_can_class_register(mcan_class);
-	if (ret)
+	if (ret) {
+		dev_err(&spi->dev, "Failed registering m_can device %pe\n",
+			ERR_PTR(ret));
 		goto out_power;
+	}
 
 	netdev_info(mcan_class->net, "TCAN4X5X successfully initialized.\n");
 	return 0;
-- 
2.40.1

[PATCH net-next 8/9] can: c_can: Do not check for 0 return after calling platform_get_irq()

[Marc Kleine-Budde]

From: Ruan Jinjie <ruanjinjie@huawei.com>

It is not possible for platform_get_irq() to return 0. Use the
return value from platform_get_irq().

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/all/20230802030900.2271322-1-ruanjinjie@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can_platform.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 925930b6c4ca..f44ba2600415 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -285,8 +285,8 @@ static int c_can_plat_probe(struct platform_device *pdev)
 
 	/* get the platform data */
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
-		ret = -ENODEV;
+	if (irq < 0) {
+		ret = irq;
 		goto exit;
 	}
 
-- 
2.40.1

[PATCH net-next 9/9] can: esd_usb: Add support for esd CAN-USB/3

[Marc Kleine-Budde]

From: Frank Jungclaus <frank.jungclaus@esd.eu>

Add support for esd CAN-USB/3 and CAN FD to esd_usb.c.

Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20230728150857.2374886-2-frank.jungclaus@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/usb/esd_usb.c | 275 ++++++++++++++++++++++++++++++----
 1 file changed, 244 insertions(+), 31 deletions(-)

diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 6201637ac0ff..41a0e4261d15 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro
+ * CAN driver for esd electronics gmbh CAN-USB/2, CAN-USB/3 and CAN-USB/Micro
  *
  * Copyright (C) 2010-2012 esd electronic system design gmbh, Matthias Fuchs <socketcan@esd.eu>
  * Copyright (C) 2022-2023 esd electronics gmbh, Frank Jungclaus <frank.jungclaus@esd.eu>
@@ -19,17 +19,19 @@
 
 MODULE_AUTHOR("Matthias Fuchs <socketcan@esd.eu>");
 MODULE_AUTHOR("Frank Jungclaus <frank.jungclaus@esd.eu>");
-MODULE_DESCRIPTION("CAN driver for esd electronics gmbh CAN-USB/2 and CAN-USB/Micro interfaces");
+MODULE_DESCRIPTION("CAN driver for esd electronics gmbh CAN-USB/2, CAN-USB/3 and CAN-USB/Micro interfaces");
 MODULE_LICENSE("GPL v2");
 
 /* USB vendor and product ID */
 #define ESD_USB_ESDGMBH_VENDOR_ID	0x0ab4
 #define ESD_USB_CANUSB2_PRODUCT_ID	0x0010
 #define ESD_USB_CANUSBM_PRODUCT_ID	0x0011
+#define ESD_USB_CANUSB3_PRODUCT_ID	0x0014
 
 /* CAN controller clock frequencies */
 #define ESD_USB_2_CAN_CLOCK	(60 * MEGA) /* Hz */
 #define ESD_USB_M_CAN_CLOCK	(36 * MEGA) /* Hz */
+#define ESD_USB_3_CAN_CLOCK	(80 * MEGA) /* Hz */
 
 /* Maximum number of CAN nets */
 #define ESD_USB_MAX_NETS	2
@@ -44,6 +46,9 @@ MODULE_LICENSE("GPL v2");
 
 /* esd CAN message flags - dlc field */
 #define ESD_USB_RTR	BIT(4)
+#define ESD_USB_NO_BRS	BIT(4)
+#define ESD_USB_ESI	BIT(5)
+#define ESD_USB_FD	BIT(7)
 
 /* esd CAN message flags - id field */
 #define ESD_USB_EXTID	BIT(29)
@@ -65,6 +70,9 @@ MODULE_LICENSE("GPL v2");
 #define ESD_USB_M_SJW_SHIFT	24
 #define ESD_USB_TRIPLE_SAMPLES	BIT(23)
 
+/* Transmitter Delay Compensation */
+#define ESD_USB_3_TDC_MODE_AUTO	0
+
 /* esd IDADD message */
 #define ESD_USB_ID_ENABLE	BIT(7)
 #define ESD_USB_MAX_ID_SEGMENT	64
@@ -88,6 +96,21 @@ MODULE_LICENSE("GPL v2");
 #define ESD_USB_MAX_RX_URBS		4
 #define ESD_USB_MAX_TX_URBS		16 /* must be power of 2 */
 
+/* Modes for CAN-USB/3, to be used for esd_usb_3_set_baudrate_msg_x.mode */
+#define ESD_USB_3_BAUDRATE_MODE_DISABLE		0 /* remove from bus */
+#define ESD_USB_3_BAUDRATE_MODE_INDEX		1 /* ESD (CiA) bit rate idx */
+#define ESD_USB_3_BAUDRATE_MODE_BTR_CTRL	2 /* BTR values (controller)*/
+#define ESD_USB_3_BAUDRATE_MODE_BTR_CANONICAL	3 /* BTR values (canonical) */
+#define ESD_USB_3_BAUDRATE_MODE_NUM		4 /* numerical bit rate */
+#define ESD_USB_3_BAUDRATE_MODE_AUTOBAUD	5 /* autobaud */
+
+/* Flags for CAN-USB/3, to be used for esd_usb_3_set_baudrate_msg_x.flags */
+#define ESD_USB_3_BAUDRATE_FLAG_FD	BIT(0) /* enable CAN FD mode */
+#define ESD_USB_3_BAUDRATE_FLAG_LOM	BIT(1) /* enable listen only mode */
+#define ESD_USB_3_BAUDRATE_FLAG_STM	BIT(2) /* enable self test mode */
+#define ESD_USB_3_BAUDRATE_FLAG_TRS	BIT(3) /* enable triple sampling */
+#define ESD_USB_3_BAUDRATE_FLAG_TXP	BIT(4) /* enable transmit pause */
+
 struct esd_usb_header_msg {
 	u8 len; /* total message length in 32bit words */
 	u8 cmd;
@@ -122,6 +145,7 @@ struct esd_usb_rx_msg {
 	__le32 id; /* upper 3 bits contain flags */
 	union {
 		u8 data[CAN_MAX_DLEN];
+		u8 data_fd[CANFD_MAX_DLEN];
 		struct {
 			u8 status; /* CAN Controller Status */
 			u8 ecc;    /* Error Capture Register */
@@ -138,7 +162,10 @@ struct esd_usb_tx_msg {
 	u8 dlc;
 	u32 hnd;	/* opaque handle, not used by device */
 	__le32 id; /* upper 3 bits contain flags */
-	u8 data[CAN_MAX_DLEN];
+	union {
+		u8 data[CAN_MAX_DLEN];
+		u8 data_fd[CANFD_MAX_DLEN];
+	};
 };
 
 struct esd_usb_tx_done_msg {
@@ -166,6 +193,50 @@ struct esd_usb_set_baudrate_msg {
 	__le32 baud;
 };
 
+/* CAN-USB/3 baudrate configuration, used for nominal as well as for data bit rate */
+struct esd_usb_3_baudrate_cfg {
+	__le16 brp;	/* bit rate pre-scaler */
+	__le16 tseg1;	/* time segment before sample point */
+	__le16 tseg2;	/* time segment after sample point */
+	__le16 sjw;	/* synchronization jump Width */
+};
+
+/* In principle, the esd CAN-USB/3 supports Transmitter Delay Compensation (TDC),
+ * but currently only the automatic TDC mode is supported by this driver.
+ * An implementation for manual TDC configuration will follow.
+ *
+ * For information about struct esd_usb_3_tdc_cfg, see
+ * NTCAN Application Developers Manual, 6.2.25 NTCAN_TDC_CFG + related chapters
+ * https://esd.eu/fileadmin/esd/docs/manuals/NTCAN_Part1_Function_API_Manual_en_56.pdf
+ */
+struct esd_usb_3_tdc_cfg {
+	u8 tdc_mode;	/* transmitter delay compensation mode  */
+	u8 ssp_offset;	/* secondary sample point offset in mtq */
+	s8 ssp_shift;	/* secondary sample point shift in mtq */
+	u8 tdc_filter;	/* TDC filter in mtq */
+};
+
+/* Extended version of the above set_baudrate_msg for a CAN-USB/3
+ * to define the CAN bit timing configuration of the CAN controller in
+ * CAN FD mode as well as in Classical CAN mode.
+ *
+ * The payload of this command is a NTCAN_BAUDRATE_X structure according to
+ * esd electronics gmbh, NTCAN Application Developers Manual, 6.2.15 NTCAN_BAUDRATE_X
+ * https://esd.eu/fileadmin/esd/docs/manuals/NTCAN_Part1_Function_API_Manual_en_56.pdf
+ */
+struct esd_usb_3_set_baudrate_msg_x {
+	u8 len;	/* total message length in 32bit words */
+	u8 cmd;
+	u8 net;
+	u8 rsvd;	/*reserved */
+	/* Payload ... */
+	__le16 mode;	/* mode word, see ESD_USB_3_BAUDRATE_MODE_xxx */
+	__le16 flags;	/* control flags, see ESD_USB_3_BAUDRATE_FLAG_xxx */
+	struct esd_usb_3_tdc_cfg tdc;	/* TDC configuration */
+	struct esd_usb_3_baudrate_cfg nom;	/* nominal bit rate */
+	struct esd_usb_3_baudrate_cfg data;	/* data bit rate */
+};
+
 /* Main message type used between library and application */
 union __packed esd_usb_msg {
 	struct esd_usb_header_msg hdr;
@@ -175,12 +246,14 @@ union __packed esd_usb_msg {
 	struct esd_usb_tx_msg tx;
 	struct esd_usb_tx_done_msg txdone;
 	struct esd_usb_set_baudrate_msg setbaud;
+	struct esd_usb_3_set_baudrate_msg_x setbaud_x;
 	struct esd_usb_id_filter_msg filter;
 };
 
 static struct usb_device_id esd_usb_table[] = {
 	{USB_DEVICE(ESD_USB_ESDGMBH_VENDOR_ID, ESD_USB_CANUSB2_PRODUCT_ID)},
 	{USB_DEVICE(ESD_USB_ESDGMBH_VENDOR_ID, ESD_USB_CANUSBM_PRODUCT_ID)},
+	{USB_DEVICE(ESD_USB_ESDGMBH_VENDOR_ID, ESD_USB_CANUSB3_PRODUCT_ID)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, esd_usb_table);
@@ -321,9 +394,10 @@ static void esd_usb_rx_can_msg(struct esd_usb_net_priv *priv,
 {
 	struct net_device_stats *stats = &priv->netdev->stats;
 	struct can_frame *cf;
+	struct canfd_frame *cfd;
 	struct sk_buff *skb;
-	int i;
 	u32 id;
+	u8 len;
 
 	if (!netif_device_present(priv->netdev))
 		return;
@@ -333,27 +407,42 @@ static void esd_usb_rx_can_msg(struct esd_usb_net_priv *priv,
 	if (id & ESD_USB_EVENT) {
 		esd_usb_rx_event(priv, msg);
 	} else {
-		skb = alloc_can_skb(priv->netdev, &cf);
+		if (msg->rx.dlc & ESD_USB_FD) {
+			skb = alloc_canfd_skb(priv->netdev, &cfd);
+		} else {
+			skb = alloc_can_skb(priv->netdev, &cf);
+			cfd = (struct canfd_frame *)cf;
+		}
+
 		if (skb == NULL) {
 			stats->rx_dropped++;
 			return;
 		}
 
-		cf->can_id = id & ESD_USB_IDMASK;
-		can_frame_set_cc_len(cf, msg->rx.dlc & ~ESD_USB_RTR,
-				     priv->can.ctrlmode);
+		cfd->can_id = id & ESD_USB_IDMASK;
+
+		if (msg->rx.dlc & ESD_USB_FD) {
+			/* masking by 0x0F is already done within can_fd_dlc2len() */
+			cfd->len = can_fd_dlc2len(msg->rx.dlc);
+			len = cfd->len;
+			if ((msg->rx.dlc & ESD_USB_NO_BRS) == 0)
+				cfd->flags |= CANFD_BRS;
+			if (msg->rx.dlc & ESD_USB_ESI)
+				cfd->flags |= CANFD_ESI;
+		} else {
+			can_frame_set_cc_len(cf, msg->rx.dlc & ~ESD_USB_RTR, priv->can.ctrlmode);
+			len = cf->len;
+			if (msg->rx.dlc & ESD_USB_RTR) {
+				cf->can_id |= CAN_RTR_FLAG;
+				len = 0;
+			}
+		}
 
 		if (id & ESD_USB_EXTID)
-			cf->can_id |= CAN_EFF_FLAG;
+			cfd->can_id |= CAN_EFF_FLAG;
 
-		if (msg->rx.dlc & ESD_USB_RTR) {
-			cf->can_id |= CAN_RTR_FLAG;
-		} else {
-			for (i = 0; i < cf->len; i++)
-				cf->data[i] = msg->rx.data[i];
-
-			stats->rx_bytes += cf->len;
-		}
+		memcpy(cfd->data, msg->rx.data_fd, len);
+		stats->rx_bytes += len;
 		stats->rx_packets++;
 
 		netif_rx(skb);
@@ -728,7 +817,7 @@ static netdev_tx_t esd_usb_start_xmit(struct sk_buff *skb,
 	struct esd_usb *dev = priv->usb;
 	struct esd_tx_urb_context *context = NULL;
 	struct net_device_stats *stats = &netdev->stats;
-	struct can_frame *cf = (struct can_frame *)skb->data;
+	struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
 	union esd_usb_msg *msg;
 	struct urb *urb;
 	u8 *buf;
@@ -762,20 +851,29 @@ static netdev_tx_t esd_usb_start_xmit(struct sk_buff *skb,
 	msg->hdr.len = offsetof(struct esd_usb_tx_msg, data) / sizeof(u32);
 	msg->hdr.cmd = ESD_USB_CMD_CAN_TX;
 	msg->tx.net = priv->index;
-	msg->tx.dlc = can_get_cc_dlc(cf, priv->can.ctrlmode);
-	msg->tx.id = cpu_to_le32(cf->can_id & CAN_ERR_MASK);
 
-	if (cf->can_id & CAN_RTR_FLAG)
-		msg->tx.dlc |= ESD_USB_RTR;
+	if (can_is_canfd_skb(skb)) {
+		msg->tx.dlc = can_fd_len2dlc(cfd->len);
+		msg->tx.dlc |= ESD_USB_FD;
 
-	if (cf->can_id & CAN_EFF_FLAG)
+		if ((cfd->flags & CANFD_BRS) == 0)
+			msg->tx.dlc |= ESD_USB_NO_BRS;
+	} else {
+		msg->tx.dlc = can_get_cc_dlc((struct can_frame *)cfd, priv->can.ctrlmode);
+
+		if (cfd->can_id & CAN_RTR_FLAG)
+			msg->tx.dlc |= ESD_USB_RTR;
+	}
+
+	msg->tx.id = cpu_to_le32(cfd->can_id & CAN_ERR_MASK);
+
+	if (cfd->can_id & CAN_EFF_FLAG)
 		msg->tx.id |= cpu_to_le32(ESD_USB_EXTID);
 
-	for (i = 0; i < cf->len; i++)
-		msg->tx.data[i] = cf->data[i];
+	memcpy(msg->tx.data_fd, cfd->data, cfd->len);
 
 	/* round up, then divide by 4 to add the payload length as # of 32bit words */
-	msg->hdr.len += DIV_ROUND_UP(cf->len, sizeof(u32));
+	msg->hdr.len += DIV_ROUND_UP(cfd->len, sizeof(u32));
 
 	for (i = 0; i < ESD_USB_MAX_TX_URBS; i++) {
 		if (priv->tx_contexts[i].echo_index == ESD_USB_MAX_TX_URBS) {
@@ -962,6 +1060,105 @@ static int esd_usb_2_set_bittiming(struct net_device *netdev)
 	return err;
 }
 
+/* Nominal bittiming constants, see
+ * Microchip SAM E70/S70/V70/V71, Data Sheet, Rev. G - 07/2022
+ * 48.6.8 MCAN Nominal Bit Timing and Prescaler Register
+ */
+static const struct can_bittiming_const esd_usb_3_nom_bittiming_const = {
+	.name = "esd_usb_3",
+	.tseg1_min = 2,
+	.tseg1_max = 256,
+	.tseg2_min = 2,
+	.tseg2_max = 128,
+	.sjw_max = 128,
+	.brp_min = 1,
+	.brp_max = 512,
+	.brp_inc = 1,
+};
+
+/* Data bittiming constants, see
+ * Microchip SAM E70/S70/V70/V71, Data Sheet, Rev. G - 07/2022
+ * 48.6.4 MCAN Data Bit Timing and Prescaler Register
+ */
+static const struct can_bittiming_const esd_usb_3_data_bittiming_const = {
+	.name = "esd_usb_3",
+	.tseg1_min = 2,
+	.tseg1_max = 32,
+	.tseg2_min = 1,
+	.tseg2_max = 16,
+	.sjw_max = 8,
+	.brp_min = 1,
+	.brp_max = 32,
+	.brp_inc = 1,
+};
+
+static int esd_usb_3_set_bittiming(struct net_device *netdev)
+{
+	const struct can_bittiming_const *nom_btc = &esd_usb_3_nom_bittiming_const;
+	const struct can_bittiming_const *data_btc = &esd_usb_3_data_bittiming_const;
+	struct esd_usb_net_priv *priv = netdev_priv(netdev);
+	struct can_bittiming *nom_bt = &priv->can.bittiming;
+	struct can_bittiming *data_bt = &priv->can.data_bittiming;
+	struct esd_usb_3_set_baudrate_msg_x *baud_x;
+	union esd_usb_msg *msg;
+	u16 flags = 0;
+	int err;
+
+	msg = kmalloc(sizeof(*msg), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	baud_x = &msg->setbaud_x;
+
+	/* Canonical is the most reasonable mode for SocketCAN on CAN-USB/3 ... */
+	baud_x->mode = cpu_to_le16(ESD_USB_3_BAUDRATE_MODE_BTR_CANONICAL);
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
+		flags |= ESD_USB_3_BAUDRATE_FLAG_LOM;
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+		flags |= ESD_USB_3_BAUDRATE_FLAG_TRS;
+
+	baud_x->nom.brp = cpu_to_le16(nom_bt->brp & (nom_btc->brp_max - 1));
+	baud_x->nom.sjw = cpu_to_le16(nom_bt->sjw & (nom_btc->sjw_max - 1));
+	baud_x->nom.tseg1 = cpu_to_le16((nom_bt->prop_seg + nom_bt->phase_seg1)
+					& (nom_btc->tseg1_max - 1));
+	baud_x->nom.tseg2 = cpu_to_le16(nom_bt->phase_seg2 & (nom_btc->tseg2_max - 1));
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
+		baud_x->data.brp = cpu_to_le16(data_bt->brp & (data_btc->brp_max - 1));
+		baud_x->data.sjw = cpu_to_le16(data_bt->sjw & (data_btc->sjw_max - 1));
+		baud_x->data.tseg1 = cpu_to_le16((data_bt->prop_seg + data_bt->phase_seg1)
+						 & (data_btc->tseg1_max - 1));
+		baud_x->data.tseg2 = cpu_to_le16(data_bt->phase_seg2 & (data_btc->tseg2_max - 1));
+		flags |= ESD_USB_3_BAUDRATE_FLAG_FD;
+	}
+
+	/* Currently this driver only supports the automatic TDC mode */
+	baud_x->tdc.tdc_mode = ESD_USB_3_TDC_MODE_AUTO;
+	baud_x->tdc.ssp_offset = 0;
+	baud_x->tdc.ssp_shift = 0;
+	baud_x->tdc.tdc_filter = 0;
+
+	baud_x->flags = cpu_to_le16(flags);
+	baud_x->net = priv->index;
+	baud_x->rsvd = 0;
+
+	/* set len as # of 32bit words */
+	msg->hdr.len = sizeof(struct esd_usb_3_set_baudrate_msg_x) / sizeof(u32);
+	msg->hdr.cmd = ESD_USB_CMD_SETBAUD;
+
+	netdev_dbg(netdev,
+		   "ctrlmode=%#x/%#x, esd-net=%u, esd-mode=%#x, esd-flags=%#x\n",
+		   priv->can.ctrlmode, priv->can.ctrlmode_supported,
+		   priv->index, le16_to_cpu(baud_x->mode), flags);
+
+	err = esd_usb_send_msg(priv->usb, msg);
+
+	kfree(msg);
+	return err;
+}
+
 static int esd_usb_get_berr_counter(const struct net_device *netdev,
 				    struct can_berr_counter *bec)
 {
@@ -1019,16 +1216,32 @@ static int esd_usb_probe_one_net(struct usb_interface *intf, int index)
 		CAN_CTRLMODE_CC_LEN8_DLC |
 		CAN_CTRLMODE_BERR_REPORTING;
 
-	if (le16_to_cpu(dev->udev->descriptor.idProduct) ==
-	    ESD_USB_CANUSBM_PRODUCT_ID)
+	switch (le16_to_cpu(dev->udev->descriptor.idProduct)) {
+	case ESD_USB_CANUSB3_PRODUCT_ID:
+		priv->can.clock.freq = ESD_USB_3_CAN_CLOCK;
+		priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
+		priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD;
+		priv->can.bittiming_const = &esd_usb_3_nom_bittiming_const;
+		priv->can.data_bittiming_const = &esd_usb_3_data_bittiming_const;
+		priv->can.do_set_bittiming = esd_usb_3_set_bittiming;
+		priv->can.do_set_data_bittiming = esd_usb_3_set_bittiming;
+		break;
+
+	case ESD_USB_CANUSBM_PRODUCT_ID:
 		priv->can.clock.freq = ESD_USB_M_CAN_CLOCK;
-	else {
+		priv->can.bittiming_const = &esd_usb_2_bittiming_const;
+		priv->can.do_set_bittiming = esd_usb_2_set_bittiming;
+		break;
+
+	case ESD_USB_CANUSB2_PRODUCT_ID:
+	default:
 		priv->can.clock.freq = ESD_USB_2_CAN_CLOCK;
 		priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
+		priv->can.bittiming_const = &esd_usb_2_bittiming_const;
+		priv->can.do_set_bittiming = esd_usb_2_set_bittiming;
+		break;
 	}
 
-	priv->can.bittiming_const = &esd_usb_2_bittiming_const;
-	priv->can.do_set_bittiming = esd_usb_2_set_bittiming;
 	priv->can.do_set_mode = esd_usb_set_mode;
 	priv->can.do_get_berr_counter = esd_usb_get_berr_counter;
 
-- 
2.40.1

Re: [PATCH net-next 1/9] can: flexcan: fix the return value handle for platform_get_irq()

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Marc Kleine-Budde <mkl@pengutronix.de>:

On Thu,  3 Aug 2023 10:08:22 +0200 you wrote:
> From: Ruan Jinjie <ruanjinjie@huawei.com>
> 
> There is no possible for platform_get_irq() to return 0
> and the return value of platform_get_irq() is more sensible
> to show the error reason.
> 
> Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
> Link: https://lore.kernel.org/all/20230731075252.359965-1-ruanjinjie@huawei.com
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> 
> [...]

Here is the summary with links:
  - [net-next,1/9] can: flexcan: fix the return value handle for platform_get_irq()
    https://git.kernel.org/netdev/net-next/c/53b8d2be4d71
  - [net-next,2/9] dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
    https://git.kernel.org/netdev/net-next/c/e332873dc7e2
  - [net-next,3/9] can: tcan4x5x: Remove reserved register 0x814 from writable table
    https://git.kernel.org/netdev/net-next/c/fbe534f7bf21
  - [net-next,4/9] can: tcan4x5x: Check size of mram configuration
    https://git.kernel.org/netdev/net-next/c/c1b17ea7dd7c
  - [net-next,5/9] can: tcan4x5x: Rename ID registers to match datasheet
    https://git.kernel.org/netdev/net-next/c/0d6f3b25ac2f
  - [net-next,6/9] can: tcan4x5x: Add support for tcan4552/4553
    https://git.kernel.org/netdev/net-next/c/142c6dc6d9d7
  - [net-next,7/9] can: tcan4x5x: Add error messages in probe
    https://git.kernel.org/netdev/net-next/c/35e7aaab3e00
  - [net-next,8/9] can: c_can: Do not check for 0 return after calling platform_get_irq()
    https://git.kernel.org/netdev/net-next/c/db31e6f170f3
  - [net-next,9/9] can: esd_usb: Add support for esd CAN-USB/3
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html