From: Gerd Bayer <gbayer@linux.ibm.com>
To: Wenjia Zhang <wenjia@linux.ibm.com>,
Jan Karcher <jaka@linux.ibm.com>,
Tony Lu <tonylu@linux.alibaba.com>,
Paolo Abeni <pabeni@redhat.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>,
"D . Wythe" <alibuda@linux.alibaba.com>,
Wen Gu <guwen@linux.alibaba.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
linux-s390@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net v3 2/2] net/smc: Use correct buffer sizes when switching between TCP and SMC
Date: Fri, 4 Aug 2023 19:06:24 +0200 [thread overview]
Message-ID: <20230804170624.940883-3-gbayer@linux.ibm.com> (raw)
In-Reply-To: <20230804170624.940883-1-gbayer@linux.ibm.com>
Tuning of the effective buffer size through setsockopts was working for
SMC traffic only but not for TCP fall-back connections even before
commit 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and
make them tunable"). That change made it apparent that TCP fall-back
connections would use net.smc.[rw]mem as buffer size instead of
net.ipv4_tcp_[rw]mem.
Amend the code that copies attributes between the (TCP) clcsock and the
SMC socket and adjust buffer sizes appropriately:
- Copy over sk_userlocks so that both sockets agree on whether tuning
via setsockopt is active.
- When falling back to TCP use sk_sndbuf or sk_rcvbuf as specified with
setsockopt. Otherwise, use the sysctl value for TCP/IPv4.
- Likewise, use either values from setsockopt or from sysctl for SMC
(duplicated) on successful SMC connect.
In smc_tcp_listen_work() drop the explicit copy of buffer sizes as that
is taken care of by the attribute copy.
Fixes: 0227f058aa29 ("net/smc: Unbind r/w buffer size from clcsock and make them tunable")
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
---
net/smc/af_smc.c | 73 +++++++++++++++++++++++++++++++++---------------
1 file changed, 51 insertions(+), 22 deletions(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 5b878e523abf..f5834af5fad5 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -436,13 +436,60 @@ static int smc_bind(struct socket *sock, struct sockaddr *uaddr,
return rc;
}
+/* copy only relevant settings and flags of SOL_SOCKET level from smc to
+ * clc socket (since smc is not called for these options from net/core)
+ */
+
+#define SK_FLAGS_SMC_TO_CLC ((1UL << SOCK_URGINLINE) | \
+ (1UL << SOCK_KEEPOPEN) | \
+ (1UL << SOCK_LINGER) | \
+ (1UL << SOCK_BROADCAST) | \
+ (1UL << SOCK_TIMESTAMP) | \
+ (1UL << SOCK_DBG) | \
+ (1UL << SOCK_RCVTSTAMP) | \
+ (1UL << SOCK_RCVTSTAMPNS) | \
+ (1UL << SOCK_LOCALROUTE) | \
+ (1UL << SOCK_TIMESTAMPING_RX_SOFTWARE) | \
+ (1UL << SOCK_RXQ_OVFL) | \
+ (1UL << SOCK_WIFI_STATUS) | \
+ (1UL << SOCK_NOFCS) | \
+ (1UL << SOCK_FILTER_LOCKED) | \
+ (1UL << SOCK_TSTAMP_NEW))
+
+/* if set, use value set by setsockopt() - else use IPv4 or SMC sysctl value */
+static void smc_adjust_sock_bufsizes(struct sock *nsk, struct sock *osk,
+ unsigned long mask)
+{
+ struct net *nnet = sock_net(nsk);
+
+ nsk->sk_userlocks = osk->sk_userlocks;
+ if (osk->sk_userlocks & SOCK_SNDBUF_LOCK) {
+ nsk->sk_sndbuf = osk->sk_sndbuf;
+ } else {
+ if (mask == SK_FLAGS_SMC_TO_CLC)
+ WRITE_ONCE(nsk->sk_sndbuf,
+ READ_ONCE(nnet->ipv4.sysctl_tcp_wmem[1]));
+ else
+ WRITE_ONCE(nsk->sk_sndbuf,
+ 2 * READ_ONCE(nnet->smc.sysctl_wmem));
+ }
+ if (osk->sk_userlocks & SOCK_RCVBUF_LOCK) {
+ nsk->sk_rcvbuf = osk->sk_rcvbuf;
+ } else {
+ if (mask == SK_FLAGS_SMC_TO_CLC)
+ WRITE_ONCE(nsk->sk_rcvbuf,
+ READ_ONCE(nnet->ipv4.sysctl_tcp_rmem[1]));
+ else
+ WRITE_ONCE(nsk->sk_rcvbuf,
+ 2 * READ_ONCE(nnet->smc.sysctl_rmem));
+ }
+}
+
static void smc_copy_sock_settings(struct sock *nsk, struct sock *osk,
unsigned long mask)
{
/* options we don't get control via setsockopt for */
nsk->sk_type = osk->sk_type;
- nsk->sk_sndbuf = osk->sk_sndbuf;
- nsk->sk_rcvbuf = osk->sk_rcvbuf;
nsk->sk_sndtimeo = osk->sk_sndtimeo;
nsk->sk_rcvtimeo = osk->sk_rcvtimeo;
nsk->sk_mark = READ_ONCE(osk->sk_mark);
@@ -453,26 +500,10 @@ static void smc_copy_sock_settings(struct sock *nsk, struct sock *osk,
nsk->sk_flags &= ~mask;
nsk->sk_flags |= osk->sk_flags & mask;
+
+ smc_adjust_sock_bufsizes(nsk, osk, mask);
}
-#define SK_FLAGS_SMC_TO_CLC ((1UL << SOCK_URGINLINE) | \
- (1UL << SOCK_KEEPOPEN) | \
- (1UL << SOCK_LINGER) | \
- (1UL << SOCK_BROADCAST) | \
- (1UL << SOCK_TIMESTAMP) | \
- (1UL << SOCK_DBG) | \
- (1UL << SOCK_RCVTSTAMP) | \
- (1UL << SOCK_RCVTSTAMPNS) | \
- (1UL << SOCK_LOCALROUTE) | \
- (1UL << SOCK_TIMESTAMPING_RX_SOFTWARE) | \
- (1UL << SOCK_RXQ_OVFL) | \
- (1UL << SOCK_WIFI_STATUS) | \
- (1UL << SOCK_NOFCS) | \
- (1UL << SOCK_FILTER_LOCKED) | \
- (1UL << SOCK_TSTAMP_NEW))
-/* copy only relevant settings and flags of SOL_SOCKET level from smc to
- * clc socket (since smc is not called for these options from net/core)
- */
static void smc_copy_sock_settings_to_clc(struct smc_sock *smc)
{
smc_copy_sock_settings(smc->clcsock->sk, &smc->sk, SK_FLAGS_SMC_TO_CLC);
@@ -2479,8 +2510,6 @@ static void smc_tcp_listen_work(struct work_struct *work)
sock_hold(lsk); /* sock_put in smc_listen_work */
INIT_WORK(&new_smc->smc_listen_work, smc_listen_work);
smc_copy_sock_settings_to_smc(new_smc);
- new_smc->sk.sk_sndbuf = lsmc->sk.sk_sndbuf;
- new_smc->sk.sk_rcvbuf = lsmc->sk.sk_rcvbuf;
sock_hold(&new_smc->sk); /* sock_put in passive closing */
if (!queue_work(smc_hs_wq, &new_smc->smc_listen_work))
sock_put(&new_smc->sk);
--
2.41.0
next prev parent reply other threads:[~2023-08-04 17:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-04 17:06 [PATCH net v3 0/2] net/smc: Fix effective buffer size Gerd Bayer
2023-08-04 17:06 ` [PATCH net v3 1/2] net/smc: Fix setsockopt and sysctl to specify same buffer size again Gerd Bayer
2023-08-04 17:06 ` Gerd Bayer [this message]
2023-08-09 10:30 ` [PATCH net v3 0/2] net/smc: Fix effective buffer size patchwork-bot+netdevbpf
-- strict thread matches above, loose matches on Subject: below --
2024-05-30 9:20 [PATCH net v3 2/2] net/smc: Use correct buffer sizes when switching between TCP and SMC Wen Gu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230804170624.940883-3-gbayer@linux.ibm.com \
--to=gbayer@linux.ibm.com \
--cc=alibuda@linux.alibaba.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=guwen@linux.alibaba.com \
--cc=jaka@linux.ibm.com \
--cc=kgraul@linux.ibm.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=tonylu@linux.alibaba.com \
--cc=wenjia@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).