[PATCH net] ipvlan: Fix a reference count leak warning in ipvlan_ns_exit()

[Lu Wei <luwei32@huawei.com>]

There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with
L3S mode and ipvlan2 with L2 mode are created based on them as
figure (1). In this case, ipvlan_register_nf_hook() will be called to
register nf hook which is needed by ipvlans in L3S mode in ns1 and value
of ipvl_nf_hook_refcnt is set to 1.

(1)
           ns1                           ns2
      ------------                  ------------

   veth1--ipvlan1 (L3S)

   veth3--ipvlan2 (L2)

(2)
           ns1                           ns2
      ------------                  ------------

   veth1--ipvlan1 (L3S)

         ipvlan2 (L2)                  veth3
     |                                  |
     |------->-------->--------->--------
                    migrate

When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in
ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event:

dev_change_net_namespace
    call_netdevice_notifiers
        ipvlan_device_event
            ipvlan_migrate_l3s_hook
                ipvlan_register_nf_hook(newnet)      (I)
                ipvlan_unregister_nf_hook(oldnet)    (II)

In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0
since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to
register nf_hook in ns2 and unregister nf_hook in ns1. As a result,
ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2
is increased incorrectly. When the second net namespace is removed, a
reference count leak warning in ipvlan_ns_exit() will be triggered.

This patch add a check before ipvlan_migrate_l3s_hook() is called. The
warning can be triggered as follows:

$ ip netns add ns1
$ ip netns add ns2
$ ip netns exec ns1 ip link add veth1 type veth peer name veth2
$ ip netns exec ns1 ip link add veth3 type veth peer name veth4
$ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s
$ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2
$ ip netns exec ns1 ip link set veth3 netns ns2
$ ip net del ns2

Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns")
Signed-off-by: Lu Wei <luwei32@huawei.com>
---
 drivers/net/ipvlan/ipvlan_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c
index b15dd9a3ad54..1b55928e89b8 100644
--- a/drivers/net/ipvlan/ipvlan_main.c
+++ b/drivers/net/ipvlan/ipvlan_main.c
@@ -748,7 +748,8 @@ static int ipvlan_device_event(struct notifier_block *unused,
 
 		write_pnet(&port->pnet, newnet);
 
-		ipvlan_migrate_l3s_hook(oldnet, newnet);
+		if (port->mode == IPVLAN_MODE_L3S)
+			ipvlan_migrate_l3s_hook(oldnet, newnet);
 		break;
 	}
 	case NETDEV_UNREGISTER:
-- 
2.31.1