From: Jisheng Zhang <jszhang@kernel.org>
To: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v5 4/9] net: stmmac: reflect multi irqs for tx/rx channels and mac and safety
Date: Fri, 18 Aug 2023 00:57:44 +0800 [thread overview]
Message-ID: <20230817165749.672-5-jszhang@kernel.org> (raw)
In-Reply-To: <20230817165749.672-1-jszhang@kernel.org>
The IP supports per channel interrupt, when intel adds the per channel
interrupt support, the per channel irq is from MSI vector, but this
feature can also be supported on non-MSI platforms. Do some necessary
renaming to reflects this fact.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
.../net/ethernet/stmicro/stmmac/dwmac-intel.c | 4 +-
.../net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +-
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 48 +++++++++----------
include/linux/stmmac.h | 4 +-
4 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 979c755964b1..9050de31ed76 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -952,7 +952,7 @@ static int stmmac_config_single_msi(struct pci_dev *pdev,
res->irq = pci_irq_vector(pdev, 0);
res->wol_irq = res->irq;
- plat->flags &= ~STMMAC_FLAG_MULTI_MSI_EN;
+ plat->flags &= ~STMMAC_FLAG_PERCH_IRQ_EN;
dev_info(&pdev->dev, "%s: Single IRQ enablement successful\n",
__func__);
@@ -1004,7 +1004,7 @@ static int stmmac_config_multi_msi(struct pci_dev *pdev,
if (plat->msi_sfty_ue_vec < STMMAC_MSI_VEC_MAX)
res->sfty_ue_irq = pci_irq_vector(pdev, plat->msi_sfty_ue_vec);
- plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
+ plat->flags |= STMMAC_FLAG_PERCH_IRQ_EN;
dev_info(&pdev->dev, "%s: multi MSI enablement successful\n", __func__);
return 0;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 84d3a8551b03..9bf8adf466a2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -175,7 +175,7 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
value = readl(ioaddr + DMA_BUS_MODE);
- if (dma_cfg->multi_msi_en) {
+ if (dma_cfg->perch_irq_en) {
value &= ~DMA_BUS_MODE_INTM_MASK;
value |= (DMA_BUS_MODE_INTM_MODE1 << DMA_BUS_MODE_INTM_SHIFT);
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3d90ca983389..64c55024d69d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -126,11 +126,11 @@ module_param(chain_mode, int, 0444);
MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode");
static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
-/* For MSI interrupts handling */
+/* For multi channel interrupts handling */
static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id);
static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id);
-static irqreturn_t stmmac_msi_intr_tx(int irq, void *data);
-static irqreturn_t stmmac_msi_intr_rx(int irq, void *data);
+static irqreturn_t stmmac_queue_intr_tx(int irq, void *data);
+static irqreturn_t stmmac_queue_intr_rx(int irq, void *data);
static void stmmac_reset_rx_queue(struct stmmac_priv *priv, u32 queue);
static void stmmac_reset_tx_queue(struct stmmac_priv *priv, u32 queue);
static void stmmac_reset_queues_param(struct stmmac_priv *priv);
@@ -3520,7 +3520,7 @@ static void stmmac_free_irq(struct net_device *dev,
}
}
-static int stmmac_request_irq_multi_msi(struct net_device *dev)
+static int stmmac_request_irq_multi_channel(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
enum request_irq_err irq_err;
@@ -3537,7 +3537,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
0, int_name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: alloc mac MSI %d (error: %d)\n",
+ "%s: alloc mac irq %d (error: %d)\n",
__func__, dev->irq, ret);
irq_err = REQ_IRQ_ERR_MAC;
goto irq_error;
@@ -3554,7 +3554,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
0, int_name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: alloc wol MSI %d (error: %d)\n",
+ "%s: alloc wol irq %d (error: %d)\n",
__func__, priv->wol_irq, ret);
irq_err = REQ_IRQ_ERR_WOL;
goto irq_error;
@@ -3572,7 +3572,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
0, int_name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: alloc lpi MSI %d (error: %d)\n",
+ "%s: alloc lpi irq %d (error: %d)\n",
__func__, priv->lpi_irq, ret);
irq_err = REQ_IRQ_ERR_LPI;
goto irq_error;
@@ -3590,7 +3590,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
0, int_name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: alloc sfty ce MSI %d (error: %d)\n",
+ "%s: alloc sfty ce irq %d (error: %d)\n",
__func__, priv->sfty_ce_irq, ret);
irq_err = REQ_IRQ_ERR_SFTY_CE;
goto irq_error;
@@ -3608,14 +3608,14 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
0, int_name, dev);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: alloc sfty ue MSI %d (error: %d)\n",
+ "%s: alloc sfty ue irq %d (error: %d)\n",
__func__, priv->sfty_ue_irq, ret);
irq_err = REQ_IRQ_ERR_SFTY_UE;
goto irq_error;
}
}
- /* Request Rx MSI irq */
+ /* Request Rx queue irq */
for (i = 0; i < priv->plat->rx_queues_to_use; i++) {
if (i >= MTL_MAX_RX_QUEUES)
break;
@@ -3625,11 +3625,11 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
int_name = priv->int_name_rx_irq[i];
sprintf(int_name, "%s:%s-%d", dev->name, "rx", i);
ret = request_irq(priv->rx_irq[i],
- stmmac_msi_intr_rx,
+ stmmac_queue_intr_rx,
0, int_name, &priv->dma_conf.rx_queue[i]);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: alloc rx-%d MSI %d (error: %d)\n",
+ "%s: alloc rx-%d irq %d (error: %d)\n",
__func__, i, priv->rx_irq[i], ret);
irq_err = REQ_IRQ_ERR_RX;
irq_idx = i;
@@ -3640,7 +3640,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
irq_set_affinity_hint(priv->rx_irq[i], &cpu_mask);
}
- /* Request Tx MSI irq */
+ /* Request Tx queue irq */
for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
if (i >= MTL_MAX_TX_QUEUES)
break;
@@ -3650,11 +3650,11 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
int_name = priv->int_name_tx_irq[i];
sprintf(int_name, "%s:%s-%d", dev->name, "tx", i);
ret = request_irq(priv->tx_irq[i],
- stmmac_msi_intr_tx,
+ stmmac_queue_intr_tx,
0, int_name, &priv->dma_conf.tx_queue[i]);
if (unlikely(ret < 0)) {
netdev_err(priv->dev,
- "%s: alloc tx-%d MSI %d (error: %d)\n",
+ "%s: alloc tx-%d irq %d (error: %d)\n",
__func__, i, priv->tx_irq[i], ret);
irq_err = REQ_IRQ_ERR_TX;
irq_idx = i;
@@ -3729,8 +3729,8 @@ static int stmmac_request_irq(struct net_device *dev)
int ret;
/* Request the IRQ lines */
- if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN)
- ret = stmmac_request_irq_multi_msi(dev);
+ if (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN)
+ ret = stmmac_request_irq_multi_channel(dev);
else
ret = stmmac_request_irq_single(dev);
@@ -5945,7 +5945,7 @@ static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
+static irqreturn_t stmmac_queue_intr_tx(int irq, void *data)
{
struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)data;
struct stmmac_dma_conf *dma_conf;
@@ -5977,7 +5977,7 @@ static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
return IRQ_HANDLED;
}
-static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
+static irqreturn_t stmmac_queue_intr_rx(int irq, void *data)
{
struct stmmac_rx_queue *rx_q = (struct stmmac_rx_queue *)data;
struct stmmac_dma_conf *dma_conf;
@@ -6014,12 +6014,12 @@ static void stmmac_poll_controller(struct net_device *dev)
if (test_bit(STMMAC_DOWN, &priv->state))
return;
- if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN) {
+ if (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN) {
for (i = 0; i < priv->plat->rx_queues_to_use; i++)
- stmmac_msi_intr_rx(0, &priv->dma_conf.rx_queue[i]);
+ stmmac_queue_intr_rx(0, &priv->dma_conf.rx_queue[i]);
for (i = 0; i < priv->plat->tx_queues_to_use; i++)
- stmmac_msi_intr_tx(0, &priv->dma_conf.tx_queue[i]);
+ stmmac_queue_intr_tx(0, &priv->dma_conf.tx_queue[i]);
} else {
disable_irq(dev->irq);
stmmac_interrupt(dev->irq, dev);
@@ -7300,8 +7300,8 @@ int stmmac_dvr_probe(struct device *device,
priv->plat = plat_dat;
priv->ioaddr = res->addr;
priv->dev->base_addr = (unsigned long)res->addr;
- priv->plat->dma_cfg->multi_msi_en =
- (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN);
+ priv->plat->dma_cfg->perch_irq_en =
+ (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN);
priv->dev->irq = res->irq;
priv->wol_irq = res->wol_irq;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 9c90e2e295d4..c052c222fa3e 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -98,7 +98,7 @@ struct stmmac_dma_cfg {
int mixed_burst;
bool aal;
bool eame;
- bool multi_msi_en;
+ bool perch_irq_en;
bool dche;
};
@@ -213,7 +213,7 @@ struct dwmac4_addrs {
#define STMMAC_FLAG_TSO_EN BIT(4)
#define STMMAC_FLAG_SERDES_UP_AFTER_PHY_LINKUP BIT(5)
#define STMMAC_FLAG_VLAN_FAIL_Q_EN BIT(6)
-#define STMMAC_FLAG_MULTI_MSI_EN BIT(7)
+#define STMMAC_FLAG_PERCH_IRQ_EN BIT(7)
#define STMMAC_FLAG_EXT_SNAPSHOT_EN BIT(8)
#define STMMAC_FLAG_INT_SNAPSHOT_EN BIT(9)
#define STMMAC_FLAG_RX_CLK_RUNS_IN_LPI BIT(10)
--
2.40.1
next prev parent reply other threads:[~2023-08-17 17:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-17 16:57 [PATCH net-next v5 0/9] net: stmmac: add new features to xgmac Jisheng Zhang
2023-08-17 16:57 ` [PATCH net-next v5 1/9] net: stmmac: correct RX COE parsing for xgmac Jisheng Zhang
2023-08-18 16:21 ` Serge Semin
2023-08-17 16:57 ` [PATCH net-next v5 2/9] net: stmmac: xgmac: add more feature parsing from hw cap Jisheng Zhang
2023-08-18 16:25 ` Serge Semin
2023-08-17 16:57 ` [PATCH net-next v5 3/9] net: stmmac: enlarge max rx/tx queues and channels to 16 Jisheng Zhang
2023-08-18 16:30 ` Serge Semin
2023-08-17 16:57 ` Jisheng Zhang [this message]
2023-08-18 16:43 ` [PATCH net-next v5 4/9] net: stmmac: reflect multi irqs for tx/rx channels and mac and safety Serge Semin
2023-08-17 16:57 ` [PATCH net-next v5 5/9] net: stmmac: xgmac: support per-channel irq Jisheng Zhang
2023-08-18 17:10 ` Serge Semin
2023-08-17 16:57 ` [PATCH net-next v5 6/9] dt-bindings: net: snps,dwmac: add safety irq support Jisheng Zhang
2023-08-18 17:39 ` Serge Semin
2023-08-21 20:33 ` Rob Herring
2023-08-17 16:57 ` [PATCH net-next v5 7/9] net: stmmac: platform: support parsing safety irqs from DT Jisheng Zhang
2023-08-17 16:57 ` [PATCH net-next v5 8/9] dt-bindings: net: snps,dwmac: add per channel irq support Jisheng Zhang
2023-08-17 16:57 ` [PATCH net-next v5 9/9] net: stmmac: platform: support parsing per channel irq from DT Jisheng Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230817165749.672-5-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).