From: Hangbin Liu <liuhangbin@gmail.com>
To: netdev@vger.kernel.org
Cc: Jay Vosburgh <j.vosburgh@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>, Liang Li <liali@redhat.com>,
Jiri Pirko <jiri@nvidia.com>,
Nikolay Aleksandrov <razor@blackwall.org>,
Hangbin Liu <liuhangbin@gmail.com>
Subject: [PATCH net 3/3] selftests: bonding: add macvlan over bond testing
Date: Sat, 19 Aug 2023 17:01:09 +0800 [thread overview]
Message-ID: <20230819090109.14467-4-liuhangbin@gmail.com> (raw)
In-Reply-To: <20230819090109.14467-1-liuhangbin@gmail.com>
Add a macvlan over bonding test with mode active-backup, balance-tlb
and balance-alb.
]# ./bond_macvlan.sh
TEST: active-backup: IPv4: client->server [ OK ]
TEST: active-backup: IPv6: client->server [ OK ]
TEST: active-backup: IPv4: client->macvlan_1 [ OK ]
TEST: active-backup: IPv6: client->macvlan_1 [ OK ]
TEST: active-backup: IPv4: client->macvlan_2 [ OK ]
TEST: active-backup: IPv6: client->macvlan_2 [ OK ]
TEST: active-backup: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: active-backup: IPv4: server->client [ OK ]
TEST: active-backup: IPv6: server->client [ OK ]
TEST: active-backup: IPv4: macvlan_1->client [ OK ]
TEST: active-backup: IPv6: macvlan_1->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->client [ OK ]
TEST: active-backup: IPv6: macvlan_2->client [ OK ]
TEST: active-backup: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: active-backup: IPv6: macvlan_2->macvlan_2 [ OK ]
[...]
TEST: balance-alb: IPv4: client->server [ OK ]
TEST: balance-alb: IPv6: client->server [ OK ]
TEST: balance-alb: IPv4: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_1 [ OK ]
TEST: balance-alb: IPv4: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: client->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_1->macvlan_2 [ OK ]
TEST: balance-alb: IPv4: server->client [ OK ]
TEST: balance-alb: IPv6: server->client [ OK ]
TEST: balance-alb: IPv4: macvlan_1->client [ OK ]
TEST: balance-alb: IPv6: macvlan_1->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->client [ OK ]
TEST: balance-alb: IPv6: macvlan_2->client [ OK ]
TEST: balance-alb: IPv4: macvlan_2->macvlan_2 [ OK ]
TEST: balance-alb: IPv6: macvlan_2->macvlan_2 [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
.../drivers/net/bonding/bond_macvlan.sh | 99 +++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
new file mode 100755
index 000000000000..b609fb6231f4
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
@@ -0,0 +1,99 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test macvlan over balance-alb
+
+lib_dir=$(dirname "$0")
+source ${lib_dir}/bond_topo_2d1c.sh
+
+m1_ns="m1-$(mktemp -u XXXXXX)"
+m2_ns="m1-$(mktemp -u XXXXXX)"
+m1_ip4="192.0.2.11"
+m1_ip6="2001:db8::11"
+m2_ip4="192.0.2.12"
+m2_ip6="2001:db8::12"
+
+cleanup()
+{
+ ip -n ${m1_ns} link del macv0
+ ip netns del ${m1_ns}
+ ip -n ${m2_ns} link del macv0
+ ip netns del ${m2_ns}
+
+ client_destroy
+ server_destroy
+ gateway_destroy
+}
+
+check_connection()
+{
+ local ns=${1}
+ local target=${2}
+ local message=${3:-"macvlan_over_bond"}
+ RET=0
+
+
+ ip netns exec ${ns} ping ${target} -c 4 -i 0.1 &>/dev/null
+ check_err $? "ping failed"
+ log_test "$mode: $message"
+}
+
+macvlan_over_bond()
+{
+ local param="$1"
+ RET=0
+
+ # setup new bond mode
+ bond_reset "${param}"
+
+ ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
+ ip -n ${s_ns} link set macv0 netns ${m1_ns}
+ ip -n ${m1_ns} link set dev macv0 up
+ ip -n ${m1_ns} addr add ${m1_ip4}/24 dev macv0
+ ip -n ${m1_ns} addr add ${m1_ip6}/24 dev macv0
+
+ ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
+ ip -n ${s_ns} link set macv0 netns ${m2_ns}
+ ip -n ${m2_ns} link set dev macv0 up
+ ip -n ${m2_ns} addr add ${m2_ip4}/24 dev macv0
+ ip -n ${m2_ns} addr add ${m2_ip6}/24 dev macv0
+
+ sleep 2
+
+ check_connection "${c_ns}" "${s_ip4}" "IPv4: client->server"
+ check_connection "${c_ns}" "${s_ip6}" "IPv6: client->server"
+ check_connection "${c_ns}" "${m1_ip4}" "IPv4: client->macvlan_1"
+ check_connection "${c_ns}" "${m1_ip6}" "IPv6: client->macvlan_1"
+ check_connection "${c_ns}" "${m2_ip4}" "IPv4: client->macvlan_2"
+ check_connection "${c_ns}" "${m2_ip6}" "IPv6: client->macvlan_2"
+ check_connection "${m1_ns}" "${m2_ip4}" "IPv4: macvlan_1->macvlan_2"
+ check_connection "${m1_ns}" "${m2_ip6}" "IPv6: macvlan_1->macvlan_2"
+
+
+ sleep 5
+
+ check_connection "${s_ns}" "${c_ip4}" "IPv4: server->client"
+ check_connection "${s_ns}" "${c_ip6}" "IPv6: server->client"
+ check_connection "${m1_ns}" "${c_ip4}" "IPv4: macvlan_1->client"
+ check_connection "${m1_ns}" "${c_ip6}" "IPv6: macvlan_1->client"
+ check_connection "${m2_ns}" "${c_ip4}" "IPv4: macvlan_2->client"
+ check_connection "${m2_ns}" "${c_ip6}" "IPv6: macvlan_2->client"
+ check_connection "${m2_ns}" "${m1_ip4}" "IPv4: macvlan_2->macvlan_2"
+ check_connection "${m2_ns}" "${m1_ip6}" "IPv6: macvlan_2->macvlan_2"
+
+ ip -n ${c_ns} neigh flush dev eth0
+}
+
+trap cleanup EXIT
+
+setup_prepare
+ip netns add ${m1_ns}
+ip netns add ${m2_ns}
+
+modes="active-backup balance-tlb balance-alb"
+
+for mode in $modes; do
+ macvlan_over_bond "mode $mode"
+done
+
+exit $EXIT_STATUS
--
2.41.0
prev parent reply other threads:[~2023-08-19 10:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-19 9:01 [PATCH net 0/3] bonding: fix macvlan over alb bond support Hangbin Liu
2023-08-19 9:01 ` [PATCH net 1/3] " Hangbin Liu
2023-08-21 22:54 ` Jay Vosburgh
2023-08-19 9:01 ` [PATCH net 2/3] selftest: bond: add new topo bond_topo_2d1c.sh Hangbin Liu
2023-08-19 9:01 ` Hangbin Liu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230819090109.14467-4-liuhangbin@gmail.com \
--to=liuhangbin@gmail.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=j.vosburgh@gmail.com \
--cc=jiri@nvidia.com \
--cc=kuba@kernel.org \
--cc=liali@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=razor@blackwall.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).