Re: [PATCH 2/2] net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)

[Oleksij Rempel <o.rempel@pengutronix.de>]

On Wed, Aug 30, 2023 at 12:08:17PM +0100, Russell King (Oracle) wrote:
> On Wed, Aug 30, 2023 at 11:21:19AM +0200, Lukasz Majewski wrote:
> > +	/* KSZ9477 Errata DS80000754C
> > +	 *
> > +	 * Module 4: Energy Efficient Ethernet (EEE) feature select must be
> > +	 * manually disabled
> > +	 *   The EEE feature is enabled by default, but it is not fully
> > +	 *   operational. It must be manually disabled through register
> > +	 *   controls. If not disabled, the PHY ports can auto-negotiate
> > +	 *   to enable EEE, and this feature can cause link drops when linked
> > +	 *   to another device supporting EEE.
> > +	 *
> > +	 *   Although, the KSZ9477 MMD register
> > +	 *   (MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV) advertise that EEE is
> > +	 *   operational one needs to manualy clear them to follow the chip
> > +	 *   errata.
> > +	 */
> > +	linkmode_and(phydev->supported_eee, phydev->supported, zero);
> 
> Hi,
> 
> I'm wondering whether you had a reason to write the above, rather than
> use the simpler:
> 
> 	linkmode_zero(phydev->supported_eee);

Ah, I wondered what was the proper name for this and was not able to
found it.

Thank you!

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |