netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: John Watts <contact@jookia.org>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	Sasha Levin <sashal@kernel.org>,
	wg@grandegger.com, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com, wens@csie.org,
	jernej.skrabec@gmail.com, samuel@sholland.org,
	linux-can@vger.kernel.org, netdev@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev
Subject: [PATCH AUTOSEL 6.5 14/45] can: sun4i_can: Add support for the Allwinner D1
Date: Fri,  8 Sep 2023 14:12:55 -0400	[thread overview]
Message-ID: <20230908181327.3459042-14-sashal@kernel.org> (raw)
In-Reply-To: <20230908181327.3459042-1-sashal@kernel.org>

From: John Watts <contact@jookia.org>

[ Upstream commit 8abb95250ae6af2d51993da8fcae18da2ce24cc4 ]

The controllers present in the D1 are extremely similar to the R40
and require the same reset quirks, but An extra quirk is needed to support
receiving packets.

Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/all/20230721221552.1973203-6-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/Kconfig     |  4 ++--
 drivers/net/can/sun4i_can.c | 12 +++++++++++-
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index a5c5036dfb943..e626de33e735d 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -185,10 +185,10 @@ config CAN_SLCAN
 
 config CAN_SUN4I
 	tristate "Allwinner A10 CAN controller"
-	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+	depends on MACH_SUN4I || MACH_SUN7I || RISCV || COMPILE_TEST
 	help
 	  Say Y here if you want to use CAN controller found on Allwinner
-	  A10/A20 SoCs.
+	  A10/A20/D1 SoCs.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called sun4i_can.
diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c
index 1f90fe6dbb8bb..c508a328e38d4 100644
--- a/drivers/net/can/sun4i_can.c
+++ b/drivers/net/can/sun4i_can.c
@@ -91,6 +91,8 @@
 #define SUN4I_REG_BUF12_ADDR	0x0070	/* CAN Tx/Rx Buffer 12 */
 #define SUN4I_REG_ACPC_ADDR	0x0040	/* CAN Acceptance Code 0 */
 #define SUN4I_REG_ACPM_ADDR	0x0044	/* CAN Acceptance Mask 0 */
+#define SUN4I_REG_ACPC_ADDR_D1	0x0028	/* CAN Acceptance Code 0 on the D1 */
+#define SUN4I_REG_ACPM_ADDR_D1	0x002C	/* CAN Acceptance Mask 0 on the D1 */
 #define SUN4I_REG_RBUF_RBACK_START_ADDR	0x0180	/* CAN transmit buffer start */
 #define SUN4I_REG_RBUF_RBACK_END_ADDR	0x01b0	/* CAN transmit buffer end */
 
@@ -779,6 +781,11 @@ static const struct sun4ican_quirks sun4ican_quirks_r40 = {
 	.acp_offset = 0,
 };
 
+static const struct sun4ican_quirks sun4ican_quirks_d1 = {
+	.has_reset = true,
+	.acp_offset = (SUN4I_REG_ACPC_ADDR_D1 - SUN4I_REG_ACPC_ADDR),
+};
+
 static const struct of_device_id sun4ican_of_match[] = {
 	{
 		.compatible = "allwinner,sun4i-a10-can",
@@ -789,6 +796,9 @@ static const struct of_device_id sun4ican_of_match[] = {
 	}, {
 		.compatible = "allwinner,sun8i-r40-can",
 		.data = &sun4ican_quirks_r40
+	}, {
+		.compatible = "allwinner,sun20i-d1-can",
+		.data = &sun4ican_quirks_d1
 	}, {
 		/* sentinel */
 	},
@@ -913,4 +923,4 @@ module_platform_driver(sun4i_can_driver);
 MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>");
 MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20)");
+MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20/D1)");
-- 
2.40.1


  parent reply	other threads:[~2023-09-08 18:14 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20230908181327.3459042-1-sashal@kernel.org>
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 02/45] devlink: remove reload failed checks in params get/set callbacks Sasha Levin
2023-09-08 21:27   ` Jakub Kicinski
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 05/45] net: stmmac: use per-queue 64 bit statistics where necessary Sasha Levin
2023-09-13 14:43   ` Jisheng Zhang
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 06/45] ice: Don't tx before switchdev is fully configured Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 13/45] can: sun4i_can: Add acceptance register quirk Sasha Levin
2023-09-08 18:12 ` Sasha Levin [this message]
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 15/45] net: Use sockaddr_storage for getsockopt(SO_PEERNAME) Sasha Levin
2023-09-08 18:12 ` [PATCH AUTOSEL 6.5 18/45] net/ipv4: return the real errno instead of -EINVAL Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 19/45] net: annotate data-races around sock->ops Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 27/45] netlink: convert nlk->flags to atomic flags Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 30/45] alx: fix OOB-read compiler warning Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 32/45] wifi: mac80211: check S1G action frame size Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 33/45] netfilter: ebtables: fix fortify warnings in size_entry_mwt() Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 34/45] wifi: cfg80211: reject auth/assoc to AP with our address Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 35/45] wifi: cfg80211: ocb: don't leave if not joined Sasha Levin
2023-09-08 18:13 ` [PATCH AUTOSEL 6.5 36/45] wifi: mac80211: check for station first in client probe Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230908181327.3459042-14-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=contact@jookia.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=samuel@sholland.org \
    --cc=stable@vger.kernel.org \
    --cc=wens@csie.org \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).