[PATCH 1/7] dt-bindings: net: add STM32MP13 compatible in documentation for stm32

[Christophe Roullier <christophe.roullier@foss.st.com>]

New STM32 SOC have 2 GMACs instances.
GMAC IP version is SNPS 4.20.

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../devicetree/bindings/net/stm32-dwmac.yaml  | 140 +++++++++++++++---
 1 file changed, 118 insertions(+), 22 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fc8c96b08d7d..75836916c38c 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -22,15 +22,17 @@ select:
         enum:
           - st,stm32-dwmac
           - st,stm32mp1-dwmac
+          - st,stm32mp13-dwmac
   required:
     - compatible
 
-allOf:
-  - $ref: snps,dwmac.yaml#
-
 properties:
   compatible:
     oneOf:
+      - items:
+          - enum:
+              - st,stm32mp13-dwmac
+          - const: snps,dwmac-4.20a
       - items:
           - enum:
               - st,stm32mp1-dwmac
@@ -72,27 +74,69 @@ properties:
         - eth-ck
         - ptp_ref
 
-  st,syscon:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    items:
-      - items:
-          - description: phandle to the syscon node which encompases the glue register
-          - description: offset of the control register
+  phy-supply:
+    description: PHY regulator
+
+  st,ext-phyclk:
     description:
-      Should be phandle/offset pair. The phandle to the syscon node which
-      encompases the glue register, and the offset of the control register
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK. or in RGMII mode when you want to select
+      RCC clock instead of ETH_CLK125.
+    type: boolean
 
   st,eth-clk-sel:
+    deprecated: true
     description:
       set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
     type: boolean
 
   st,eth-ref-clk-sel:
+    deprecated: true
     description:
       set this property in RMII mode when you have PHY without crystal 50MHz and want to
       select RCC clock instead of ETH_REF_CLK.
     type: boolean
 
+allOf:
+  - $ref: snps,dwmac.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp1-dwmac
+              - st,stm32-dwmac
+    then:
+      properties:
+        st,syscon:
+          $ref: /schemas/types.yaml#/definitions/phandle-array
+          items:
+            - items:
+                - description: phandle to the syscon node which encompases the glue register
+                - description: offset of the control register
+          description:
+            Should be phandle/offset pair. The phandle to the syscon node which
+            encompases the glue register, and the offset of the control register
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp13-dwmac
+    then:
+      properties:
+        st,syscon:
+          $ref: /schemas/types.yaml#/definitions/phandle-array
+          items:
+            - items:
+                - description: phandle to the syscon node which encompases the glue register
+                - description: offset of the control register
+                - description: field to set mask in register
+          description:
+            Should be phandle/offset pair. The phandle to the syscon node which
+            encompases the glue register, the offset of the control register and
+            the mask to set bitfield in control register
+
 required:
   - compatible
   - clocks
@@ -112,24 +156,36 @@ examples:
            compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
            reg = <0x5800a000 0x2000>;
            reg-names = "stmmaceth";
-           interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "macirq";
+           interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+                                 <&exti 70 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "macirq",
+                             "eth_wake_irq";
            clock-names = "stmmaceth",
-                     "mac-clk-tx",
-                     "mac-clk-rx",
-                     "ethstp",
-                     "eth-ck";
+                         "mac-clk-tx",
+                         "mac-clk-rx",
+                         "eth-ck",
+                         "ptp_ref",
+                         "ethstp";
            clocks = <&rcc ETHMAC>,
-                <&rcc ETHTX>,
-                <&rcc ETHRX>,
-                <&rcc ETHSTP>,
-                <&rcc ETHCK_K>;
+                    <&rcc ETHTX>,
+                    <&rcc ETHRX>,
+                    <&rcc ETHCK_K>,
+                    <&rcc ETHPTP_K>,
+                    <&rcc ETHSTP>;
            st,syscon = <&syscfg 0x4>;
+           snps,mixed-burst;
            snps,pbl = <2>;
+           snps,en-tx-lpi-clockgating;
            snps,axi-config = <&stmmac_axi_config_0>;
            snps,tso;
            phy-mode = "rgmii";
-       };
+
+           stmmac_axi_config_0: stmmac-axi-config {
+                                snps,wr_osr_lmt = <0x7>;
+                                snps,rd_osr_lmt = <0x7>;
+                                snps,blen = <0 0 0 0 16 8 4>;
+           };
+     };
 
   - |
     //Example 2 (MCU example)
@@ -161,3 +217,43 @@ examples:
            snps,pbl = <8>;
            phy-mode = "mii";
        };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    #include <dt-bindings/mfd/stm32h7-rcc.h>
+    //Example 4
+     ethernet3: ethernet@5800a000 {
+           compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+           reg = <0x5800a000 0x2000>;
+           reg-names = "stmmaceth";
+           interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+                                 <&exti 68 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "macirq",
+                             "eth_wake_irq";
+           clock-names = "stmmaceth",
+                         "mac-clk-tx",
+                         "mac-clk-rx",
+                         "eth-ck",
+                         "ptp_ref",
+                         "ethstp";
+           clocks = <&rcc ETHMAC>,
+                    <&rcc ETHTX>,
+                    <&rcc ETHRX>,
+                    <&rcc ETHCK_K>,
+                    <&rcc ETHPTP_K>,
+                    <&rcc ETHSTP>;
+           st,syscon = <&syscfg 0x4 0xff0000>;
+           snps,mixed-burst;
+           snps,pbl = <2>;
+           snps,axi-config = <&stmmac_axi_config_1>;
+           snps,tso;
+           phy-mode = "rmii";
+
+           stmmac_axi_config_1: stmmac-axi-config {
+                                snps,wr_osr_lmt = <0x7>;
+                                snps,rd_osr_lmt = <0x7>;
+                                snps,blen = <0 0 0 0 16 8 4>;
+           };
+     };
-- 
2.25.1