From: Lukasz Majewski <lukma@denx.de>
To: Tristram.Ha@microchip.com, Eric Dumazet <edumazet@google.com>,
Andrew Lunn <andrew@lunn.ch>,
davem@davemloft.net, Woojung Huh <woojung.huh@microchip.com>,
Vladimir Oltean <olteanv@gmail.com>,
Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
UNGLinuxDriver@microchip.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Lukasz Majewski <lukma@denx.de>,
Florian Fainelli <florian.fainelli@broadcom.com>
Subject: [PATCH v6 net-next 1/5] net: dsa: propagate extack to ds->ops->port_hsr_join()
Date: Fri, 22 Sep 2023 15:31:04 +0200 [thread overview]
Message-ID: <20230922133108.2090612-2-lukma@denx.de> (raw)
In-Reply-To: <20230922133108.2090612-1-lukma@denx.de>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Drivers can provide meaningful error messages which state a reason why
they can't perform an offload, and dsa_slave_changeupper() already has
the infrastructure to propagate these over netlink rather than printing
to the kernel log. So pass the extack argument and modify the xrs700x
driver's port_hsr_join() prototype.
Also take the opportunity and use the extack for the 2 -EOPNOTSUPP cases
from xrs700x_hsr_join().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
Changes for v5:
- New patch
Changes for v6:
- None
---
drivers/net/dsa/xrs700x/xrs700x.c | 18 ++++++++++++------
include/net/dsa.h | 3 ++-
net/dsa/port.c | 5 +++--
net/dsa/port.h | 3 ++-
net/dsa/slave.c | 2 +-
5 files changed, 20 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c
index 753fef757f11..5b02e9e426fd 100644
--- a/drivers/net/dsa/xrs700x/xrs700x.c
+++ b/drivers/net/dsa/xrs700x/xrs700x.c
@@ -548,7 +548,8 @@ static void xrs700x_bridge_leave(struct dsa_switch *ds, int port,
}
static int xrs700x_hsr_join(struct dsa_switch *ds, int port,
- struct net_device *hsr)
+ struct net_device *hsr,
+ struct netlink_ext_ack *extack)
{
unsigned int val = XRS_HSR_CFG_HSR_PRP;
struct dsa_port *partner = NULL, *dp;
@@ -562,16 +563,21 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port,
if (ret)
return ret;
- /* Only ports 1 and 2 can be HSR/PRP redundant ports. */
- if (port != 1 && port != 2)
+ if (port != 1 && port != 2) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Only ports 1 and 2 can offload HSR/PRP");
return -EOPNOTSUPP;
+ }
- if (ver == HSR_V1)
+ if (ver == HSR_V1) {
val |= XRS_HSR_CFG_HSR;
- else if (ver == PRP_V1)
+ } else if (ver == PRP_V1) {
val |= XRS_HSR_CFG_PRP;
- else
+ } else {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Only HSR v1 and PRP v1 can be offloaded");
return -EOPNOTSUPP;
+ }
dsa_hsr_foreach_port(dp, ds, hsr) {
if (dp->index != port) {
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 0b9c6aa27047..426724808e76 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -1198,7 +1198,8 @@ struct dsa_switch_ops {
* HSR integration
*/
int (*port_hsr_join)(struct dsa_switch *ds, int port,
- struct net_device *hsr);
+ struct net_device *hsr,
+ struct netlink_ext_ack *extack);
int (*port_hsr_leave)(struct dsa_switch *ds, int port,
struct net_device *hsr);
diff --git a/net/dsa/port.c b/net/dsa/port.c
index 37ab238e8304..5f01bd4f9dec 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -2024,7 +2024,8 @@ void dsa_shared_port_link_unregister_of(struct dsa_port *dp)
dsa_shared_port_setup_phy_of(dp, false);
}
-int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr)
+int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr,
+ struct netlink_ext_ack *extack)
{
struct dsa_switch *ds = dp->ds;
int err;
@@ -2034,7 +2035,7 @@ int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr)
dp->hsr_dev = hsr;
- err = ds->ops->port_hsr_join(ds, dp->index, hsr);
+ err = ds->ops->port_hsr_join(ds, dp->index, hsr, extack);
if (err)
dp->hsr_dev = NULL;
diff --git a/net/dsa/port.h b/net/dsa/port.h
index dc812512fd0e..334879964e2c 100644
--- a/net/dsa/port.h
+++ b/net/dsa/port.h
@@ -103,7 +103,8 @@ int dsa_port_phylink_create(struct dsa_port *dp);
void dsa_port_phylink_destroy(struct dsa_port *dp);
int dsa_shared_port_link_register_of(struct dsa_port *dp);
void dsa_shared_port_link_unregister_of(struct dsa_port *dp);
-int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr);
+int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr,
+ struct netlink_ext_ack *extack);
void dsa_port_hsr_leave(struct dsa_port *dp, struct net_device *hsr);
int dsa_port_tag_8021q_vlan_add(struct dsa_port *dp, u16 vid, bool broadcast);
void dsa_port_tag_8021q_vlan_del(struct dsa_port *dp, u16 vid, bool broadcast);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 48db91b33390..2b3d89b77121 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -2862,7 +2862,7 @@ static int dsa_slave_changeupper(struct net_device *dev,
}
} else if (is_hsr_master(info->upper_dev)) {
if (info->linking) {
- err = dsa_port_hsr_join(dp, info->upper_dev);
+ err = dsa_port_hsr_join(dp, info->upper_dev, extack);
if (err == -EOPNOTSUPP) {
NL_SET_ERR_MSG_WEAK_MOD(extack,
"Offloading not supported");
--
2.20.1
next prev parent reply other threads:[~2023-09-22 13:31 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-22 13:31 [PATCH v6 net-next 0/5] net: dsa: hsr: Enable HSR HW offloading for KSZ9477 Lukasz Majewski
2023-09-22 13:31 ` Lukasz Majewski [this message]
2023-09-26 22:44 ` [PATCH v6 net-next 1/5] net: dsa: propagate extack to ds->ops->port_hsr_join() Vladimir Oltean
2023-09-22 13:31 ` [PATCH v6 net-next 2/5] net: dsa: notify drivers of MAC address changes on user ports Lukasz Majewski
2023-09-22 13:31 ` [PATCH v6 net-next 3/5] net: dsa: tag_ksz: Extend ksz9477_xmit() for HSR frame duplication Lukasz Majewski
2023-09-22 13:31 ` [PATCH v6 net-next 4/5] net: dsa: microchip: move REG_SW_MAC_ADDR to dev->info->regs[] Lukasz Majewski
2023-09-22 13:31 ` [PATCH v6 net-next 5/5] net: dsa: microchip: Enable HSR offloading for KSZ9477 Lukasz Majewski
2023-09-26 22:54 ` [PATCH v6 net-next 0/5] net: dsa: hsr: Enable HSR HW " Vladimir Oltean
2023-09-28 10:41 ` Lukasz Majewski
2023-10-03 7:58 ` Lukasz Majewski
2023-10-03 10:44 ` Vladimir Oltean
2023-10-03 12:51 ` Lukasz Majewski
2023-10-03 13:42 ` Jakub Kicinski
2023-10-03 14:15 ` Lukasz Majewski
2024-01-09 12:32 ` [net][hsr] Question regarding HSR RedBox functionality implementation (preferably on KSZ9477) Lukasz Majewski
2024-01-09 12:52 ` Vladimir Oltean
2024-01-09 14:04 ` Lukasz Majewski
2024-02-14 10:44 ` Lukasz Majewski
2024-02-15 11:51 ` Lukasz Majewski
2024-02-15 17:23 ` Stephen Hemminger
2023-10-03 13:50 ` [PATCH v6 net-next 0/5] net: dsa: hsr: Enable HSR HW offloading for KSZ9477 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230922133108.2090612-2-lukma@denx.de \
--to=lukma@denx.de \
--cc=Tristram.Ha@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=florian.fainelli@broadcom.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vladimir.oltean@nxp.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).