[PATCH v2 00/12] Series to deliver Ethernets for STM32MP13

[PATCH v2 00/12] Series to deliver Ethernets for STM32MP13

[Christophe Roullier]

STM32MP13 is STM32 SOC with 2 GMACs instances
This board have 2 RMII phy:
  -Ethernet1: RMII with crystal
  -Ethernet2: RMII without crystal
Rework dwmac glue to simplify management for next stm32

-V2: Update from remark of Andrew Lunn (split commit into a number of smaller patches)
     Update from Conor Dooley (yaml documentation)

Christophe Roullier (12):
  dt-bindings: net: add STM32MP13 compatible in documentation for stm32
  dt-bindings: net: add new property st,ext-phyclk in documentation for
    stm32
  dt-bindings: net: add phy-supply property for stm32
  net: ethernet: stmmac: rework glue to simplify management for next
    stm32
  net: ethernet: stmmac: add management of stm32mp13 for stm32
  net: ethernet: stmmac: stm32: update config management for phy wo
    cristal
  net: ethernet: stm32: clean the way to manage wol irqwake
  net: ethernet: stmmac: stm32: support the phy-supply regulator binding
  ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
  ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
  ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board
  ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support

 .../devicetree/bindings/net/stm32-dwmac.yaml  |  90 ++++++-
 arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi   |  71 ++++++
 arch/arm/boot/dts/st/stm32mp131.dtsi          |  31 +++
 arch/arm/boot/dts/st/stm32mp133.dtsi          |  30 +++
 arch/arm/boot/dts/st/stm32mp135f-dk.dts       |  48 ++++
 arch/arm/configs/multi_v7_defconfig           |   1 +
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 229 +++++++++++++-----
 7 files changed, 425 insertions(+), 75 deletions(-)

-- 
2.25.1

[PATCH v2 01/12] dt-bindings: net: add STM32MP13 compatible in documentation for stm32

[Christophe Roullier]

New STM32 SOC have 2 GMACs instances.
GMAC IP version is SNPS 4.20.

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../devicetree/bindings/net/stm32-dwmac.yaml  | 78 +++++++++++++++++--
 1 file changed, 70 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fc8c96b08d7dc..ca976281bfc22 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -22,18 +22,17 @@ select:
         enum:
           - st,stm32-dwmac
           - st,stm32mp1-dwmac
+          - st,stm32mp13-dwmac
   required:
     - compatible
 
-allOf:
-  - $ref: snps,dwmac.yaml#
-
 properties:
   compatible:
     oneOf:
       - items:
           - enum:
               - st,stm32mp1-dwmac
+              - st,stm32mp13-dwmac
           - const: snps,dwmac-4.20a
       - items:
           - enum:
@@ -74,13 +73,10 @@ properties:
 
   st,syscon:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    items:
-      - items:
-          - description: phandle to the syscon node which encompases the glue register
-          - description: offset of the control register
     description:
       Should be phandle/offset pair. The phandle to the syscon node which
-      encompases the glue register, and the offset of the control register
+      encompases the glue register, the offset of the control register and
+      the mask to set bitfield in control register
 
   st,eth-clk-sel:
     description:
@@ -101,6 +97,38 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: snps,dwmac.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp1-dwmac
+              - st,stm32-dwmac
+    then:
+      properties:
+        st,syscon:
+          items:
+            items:
+              - description: phandle to the syscon node which encompases the glue register
+              - description: offset of the control register
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp13-dwmac
+    then:
+      properties:
+        st,syscon:
+          items:
+            items:
+              - description: phandle to the syscon node which encompases the glue register
+              - description: offset of the control register
+              - description: field to set mask in register
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -161,3 +189,37 @@ examples:
            snps,pbl = <8>;
            phy-mode = "mii";
        };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    #include <dt-bindings/mfd/stm32h7-rcc.h>
+    //Example 4
+     ethernet3: ethernet@5800a000 {
+           compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+           reg = <0x5800a000 0x2000>;
+           reg-names = "stmmaceth";
+           interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+                                 <&exti 68 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "macirq",
+                             "eth_wake_irq";
+           clock-names = "stmmaceth",
+                         "mac-clk-tx",
+                         "mac-clk-rx",
+                         "eth-ck",
+                         "ptp_ref",
+                         "ethstp";
+           clocks = <&rcc ETHMAC>,
+                    <&rcc ETHTX>,
+                    <&rcc ETHRX>,
+                    <&rcc ETHCK_K>,
+                    <&rcc ETHPTP_K>,
+                    <&rcc ETHSTP>;
+           st,syscon = <&syscfg 0x4 0xff0000>;
+           snps,mixed-burst;
+           snps,pbl = <2>;
+           snps,axi-config = <&stmmac_axi_config_1>;
+           snps,tso;
+           phy-mode = "rmii";
+     };
-- 
2.25.1

[PATCH v2 02/12] dt-bindings: net: add new property st,ext-phyclk in documentation for stm32

[Christophe Roullier]

Add property st,ext-phyclk to manage cases when PHY have no cristal/quartz
This property can be used with RMII phy without cristal 50Mhz and when we
want to select RCC clock instead of ETH_REF_CLK
Can be used also with RGMII phy with no cristal and we select RCC clock
instead of ETH_CLK125
This new property replace st,eth-clk-sel and st,eth-ref-clk-sel

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index ca976281bfc22..54fda8b052abc 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -78,12 +78,21 @@ properties:
       encompases the glue register, the offset of the control register and
       the mask to set bitfield in control register
 
+  st,ext-phyclk:
+     description:
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK. or in RGMII mode when you want to select
+      RCC clock instead of ETH_CLK125.
+    type: boolean
+
   st,eth-clk-sel:
+    deprecated: true
     description:
       set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
     type: boolean
 
   st,eth-ref-clk-sel:
+    deprecated: true
     description:
       set this property in RMII mode when you have PHY without crystal 50MHz and want to
       select RCC clock instead of ETH_REF_CLK.
-- 
2.25.1

[PATCH v2 03/12] dt-bindings: net: add phy-supply property for stm32

[Christophe Roullier]

Phandle to a regulator that provides power to the PHY. This
regulator will be managed during the PHY power on/off sequence.

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index 54fda8b052abc..f96b1589224ba 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -78,6 +78,9 @@ properties:
       encompases the glue register, the offset of the control register and
       the mask to set bitfield in control register
 
+  phy-supply:
+    description: PHY regulator
+
   st,ext-phyclk:
      description:
       set this property in RMII mode when you have PHY without crystal 50MHz and want to
-- 
2.25.1

[PATCH v2 04/12] net: ethernet: stmmac: rework glue to simplify management for next stm32

[Christophe Roullier]

Change glue to be more generic and manage easily next stm32 products.
The goal of this commit is to have one stm32mp1_set_mode function which
can manage different STM32 SOC. SOC can have different SYSCFG register
bitfields. so in pmcsetr we defined the bitfields corresponding to the SOC.

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 70 +++++++++++++------
 1 file changed, 48 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index ab4324ed46dac..52106e0d7359f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -23,10 +23,6 @@
 
 #define SYSCFG_MCU_ETH_MASK		BIT(23)
 #define SYSCFG_MP1_ETH_MASK		GENMASK(23, 16)
-#define SYSCFG_PMCCLRR_OFFSET		0x40
-
-#define SYSCFG_PMCR_ETH_CLK_SEL		BIT(16)
-#define SYSCFG_PMCR_ETH_REF_CLK_SEL	BIT(17)
 
 /* CLOCK feed to PHY*/
 #define ETH_CK_F_25M	25000000
@@ -46,9 +42,6 @@
  * RMII  |   1	 |   0	  |   0	   |  n/a  |
  *------------------------------------------
  */
-#define SYSCFG_PMCR_ETH_SEL_MII		BIT(20)
-#define SYSCFG_PMCR_ETH_SEL_RGMII	BIT(21)
-#define SYSCFG_PMCR_ETH_SEL_RMII	BIT(23)
 #define SYSCFG_PMCR_ETH_SEL_GMII	0
 #define SYSCFG_MCU_ETH_SEL_MII		0
 #define SYSCFG_MCU_ETH_SEL_RMII		1
@@ -90,12 +83,25 @@ struct stm32_dwmac {
 	int eth_ref_clk_sel_reg;
 	int irq_pwr_wakeup;
 	u32 mode_reg;		 /* MAC glue-logic mode register */
+	u32 mode_mask;
 	struct regmap *regmap;
 	u32 speed;
 	const struct stm32_ops *ops;
 	struct device *dev;
 };
 
+struct stm32_syscfg_pmcsetr {
+	u32 eth1_clk_sel;
+	u32 eth1_ref_clk_sel;
+	u32 eth1_selmii;
+	u32 eth1_sel_rgmii;
+	u32 eth1_sel_rmii;
+	u32 eth2_clk_sel;
+	u32 eth2_ref_clk_sel;
+	u32 eth2_sel_rgmii;
+	u32 eth2_sel_rmii;
+};
+
 struct stm32_ops {
 	int (*set_mode)(struct plat_stmmacenet_data *plat_dat);
 	int (*clk_prepare)(struct stm32_dwmac *dwmac, bool prepare);
@@ -103,7 +109,8 @@ struct stm32_ops {
 	void (*resume)(struct stm32_dwmac *dwmac);
 	int (*parse_data)(struct stm32_dwmac *dwmac,
 			  struct device *dev);
-	u32 syscfg_eth_mask;
+	u32 syscfg_clr_off;
+	struct stm32_syscfg_pmcsetr pmcsetr;
 };
 
 static int stm32_dwmac_init(struct plat_stmmacenet_data *plat_dat)
@@ -175,7 +182,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 	case PHY_INTERFACE_MODE_MII:
 		if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk)
 			dwmac->enable_eth_ck = true;
-		val = SYSCFG_PMCR_ETH_SEL_MII;
+		val = dwmac->ops->pmcsetr.eth1_selmii;
 		pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
 		break;
 	case PHY_INTERFACE_MODE_GMII:
@@ -183,16 +190,17 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 		if (clk_rate == ETH_CK_F_25M &&
 		    (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
 			dwmac->enable_eth_ck = true;
-			val |= SYSCFG_PMCR_ETH_CLK_SEL;
+			val |= dwmac->ops->pmcsetr.eth1_clk_sel;
 		}
 		pr_debug("SYSCFG init : PHY_INTERFACE_MODE_GMII\n");
 		break;
 	case PHY_INTERFACE_MODE_RMII:
-		val = SYSCFG_PMCR_ETH_SEL_RMII;
+		val = dwmac->ops->pmcsetr.eth1_sel_rmii | dwmac->ops->pmcsetr.eth2_sel_rmii;
 		if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) &&
 		    (dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk)) {
 			dwmac->enable_eth_ck = true;
-			val |= SYSCFG_PMCR_ETH_REF_CLK_SEL;
+			val |= dwmac->ops->pmcsetr.eth1_ref_clk_sel;
+			val |= dwmac->ops->pmcsetr.eth2_ref_clk_sel;
 		}
 		pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RMII\n");
 		break;
@@ -200,11 +208,12 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
-		val = SYSCFG_PMCR_ETH_SEL_RGMII;
+		val = dwmac->ops->pmcsetr.eth1_sel_rgmii | dwmac->ops->pmcsetr.eth2_sel_rgmii;
 		if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) &&
 		    (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
 			dwmac->enable_eth_ck = true;
-			val |= SYSCFG_PMCR_ETH_CLK_SEL;
+			val |= dwmac->ops->pmcsetr.eth1_clk_sel;
+			val |= dwmac->ops->pmcsetr.eth2_clk_sel;
 		}
 		pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RGMII\n");
 		break;
@@ -216,12 +225,12 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 	}
 
 	/* Need to update PMCCLRR (clear register) */
-	regmap_write(dwmac->regmap, reg + SYSCFG_PMCCLRR_OFFSET,
-		     dwmac->ops->syscfg_eth_mask);
+	regmap_write(dwmac->regmap, reg + dwmac->ops->syscfg_clr_off,
+		     dwmac->mode_mask);
 
 	/* Update PMCSETR (set register) */
 	return regmap_update_bits(dwmac->regmap, reg,
-				 dwmac->ops->syscfg_eth_mask, val);
+				 dwmac->mode_mask, val);
 }
 
 static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
@@ -247,7 +256,7 @@ static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
 	}
 
 	return regmap_update_bits(dwmac->regmap, reg,
-				 dwmac->ops->syscfg_eth_mask, val << 23);
+				 SYSCFG_MCU_ETH_MASK, val << 23);
 }
 
 static void stm32_dwmac_clk_disable(struct stm32_dwmac *dwmac)
@@ -290,10 +299,17 @@ static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
 		return PTR_ERR(dwmac->regmap);
 
 	err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->mode_reg);
+	if (err) {
+		dev_err(dev, "Can't get sysconfig register offset (%d)\n", err);
+		return err;
+	}
+
+	dwmac->mode_mask = SYSCFG_MP1_ETH_MASK;
+	err = of_property_read_u32_index(np, "st,syscon", 2, &dwmac->mode_mask);
 	if (err)
-		dev_err(dev, "Can't get sysconfig mode offset (%d)\n", err);
+		pr_debug("Warning sysconfig register mask not set\n");
 
-	return err;
+	return 0;
 }
 
 static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
@@ -499,7 +515,6 @@ static SIMPLE_DEV_PM_OPS(stm32_dwmac_pm_ops,
 static struct stm32_ops stm32mcu_dwmac_data = {
 	.set_mode = stm32mcu_set_mode,
 	.suspend = stm32mcu_suspend,
-	.syscfg_eth_mask = SYSCFG_MCU_ETH_MASK
 };
 
 static struct stm32_ops stm32mp1_dwmac_data = {
@@ -508,7 +523,18 @@ static struct stm32_ops stm32mp1_dwmac_data = {
 	.suspend = stm32mp1_suspend,
 	.resume = stm32mp1_resume,
 	.parse_data = stm32mp1_parse_data,
-	.syscfg_eth_mask = SYSCFG_MP1_ETH_MASK
+	.syscfg_clr_off = 0x44,
+	.pmcsetr = {
+		.eth1_clk_sel		= BIT(16),
+		.eth1_ref_clk_sel	= BIT(17),
+		.eth1_selmii		= BIT(20),
+		.eth1_sel_rgmii		= BIT(21),
+		.eth1_sel_rmii		= BIT(23),
+		.eth2_clk_sel		= 0,
+		.eth2_ref_clk_sel	= 0,
+		.eth2_sel_rgmii		= 0,
+		.eth2_sel_rmii		= 0
+	}
 };
 
 static const struct of_device_id stm32_dwmac_match[] = {
-- 
2.25.1

[PATCH v2 05/12] net: ethernet: stmmac: add management of stm32mp13 for stm32

[Christophe Roullier]

From: Christophe Roullier <christophe.roullier@st.com>

Add Ethernet support for STM32MP13.
STM32MP13 is STM32 SOC with 2 GMACs instances.
GMAC IP version is SNPS 4.20.
GMAC IP configure with 1 RX and 1 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 52106e0d7359f..a071dc6ffc95b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -537,9 +537,30 @@ static struct stm32_ops stm32mp1_dwmac_data = {
 	}
 };
 
+static struct stm32_ops stm32mp13_dwmac_data = {
+	.set_mode = stm32mp1_set_mode,
+	.clk_prepare = stm32mp1_clk_prepare,
+	.suspend = stm32mp1_suspend,
+	.resume = stm32mp1_resume,
+	.parse_data = stm32mp1_parse_data,
+	.syscfg_clr_off = 0x08,
+	.pmcsetr = {
+		.eth1_clk_sel		= BIT(16),
+		.eth1_ref_clk_sel	= BIT(17),
+		.eth1_selmii		= 0,
+		.eth1_sel_rgmii		= BIT(21),
+		.eth1_sel_rmii		= BIT(23),
+		.eth2_clk_sel		= BIT(24),
+		.eth2_ref_clk_sel	= BIT(25),
+		.eth2_sel_rgmii		= BIT(29),
+		.eth2_sel_rmii		= BIT(31)
+	}
+};
+
 static const struct of_device_id stm32_dwmac_match[] = {
 	{ .compatible = "st,stm32-dwmac", .data = &stm32mcu_dwmac_data},
 	{ .compatible = "st,stm32mp1-dwmac", .data = &stm32mp1_dwmac_data},
+	{ .compatible = "st,stm32mp13-dwmac", .data = &stm32mp13_dwmac_data},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, stm32_dwmac_match);
-- 
2.25.1

[PATCH v2 06/12] net: ethernet: stmmac: stm32: update config management for phy wo cristal

[Christophe Roullier]

From: Christophe Roullier <christophe.roullier@st.com>

Some cleaning because some Ethernet PHY configs do not need to add st,ext-phyclk property
Change print info message "No phy clock provided" only when debug

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 27 ++++++++++---------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index a071dc6ffc95b..1210062f0832a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -55,17 +55,17 @@
  *|         |        |      25MHz    |        50MHz       |                  |
  * ---------------------------------------------------------------------------
  *|  MII    |	 -   |     eth-ck    |	      n/a	  |	  n/a        |
- *|         |        | st,ext-phyclk |                    |		     |
+ *|         |        |	             |                    |		     |
  * ---------------------------------------------------------------------------
  *|  GMII   |	 -   |     eth-ck    |	      n/a	  |	  n/a        |
- *|         |        | st,ext-phyclk |                    |		     |
+ *|         |        |               |                    |		     |
  * ---------------------------------------------------------------------------
  *| RGMII   |	 -   |     eth-ck    |	      n/a	  |      eth-ck      |
- *|         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
+ *|         |        |               |                    | st,eth-clk-sel or|
  *|         |        |               |                    | st,ext-phyclk    |
  * ---------------------------------------------------------------------------
  *| RMII    |	 -   |     eth-ck    |	    eth-ck        |	  n/a        |
- *|         |        | st,ext-phyclk | st,eth-ref-clk-sel |		     |
+ *|         |        |               | st,eth-ref-clk-sel |		     |
  *|         |        |               | or st,ext-phyclk   |		     |
  * ---------------------------------------------------------------------------
  *
@@ -180,23 +180,22 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 	dwmac->enable_eth_ck = false;
 	switch (plat_dat->mac_interface) {
 	case PHY_INTERFACE_MODE_MII:
-		if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk)
+		if (clk_rate == ETH_CK_F_25M)
 			dwmac->enable_eth_ck = true;
 		val = dwmac->ops->pmcsetr.eth1_selmii;
 		pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
 		break;
 	case PHY_INTERFACE_MODE_GMII:
 		val = SYSCFG_PMCR_ETH_SEL_GMII;
-		if (clk_rate == ETH_CK_F_25M &&
-		    (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
+		if (clk_rate == ETH_CK_F_25M)
 			dwmac->enable_eth_ck = true;
-			val |= dwmac->ops->pmcsetr.eth1_clk_sel;
-		}
 		pr_debug("SYSCFG init : PHY_INTERFACE_MODE_GMII\n");
 		break;
 	case PHY_INTERFACE_MODE_RMII:
 		val = dwmac->ops->pmcsetr.eth1_sel_rmii | dwmac->ops->pmcsetr.eth2_sel_rmii;
-		if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_50M) &&
+		if (clk_rate == ETH_CK_F_25M)
+			dwmac->enable_eth_ck = true;
+		if ((clk_rate == ETH_CK_F_50M) &&
 		    (dwmac->eth_ref_clk_sel_reg || dwmac->ext_phyclk)) {
 			dwmac->enable_eth_ck = true;
 			val |= dwmac->ops->pmcsetr.eth1_ref_clk_sel;
@@ -209,7 +208,9 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		val = dwmac->ops->pmcsetr.eth1_sel_rgmii | dwmac->ops->pmcsetr.eth2_sel_rgmii;
-		if ((clk_rate == ETH_CK_F_25M || clk_rate == ETH_CK_F_125M) &&
+		if (clk_rate == ETH_CK_F_25M)
+			dwmac->enable_eth_ck = true;
+		if ((clk_rate == ETH_CK_F_125M) &&
 		    (dwmac->eth_clk_sel_reg || dwmac->ext_phyclk)) {
 			dwmac->enable_eth_ck = true;
 			val |= dwmac->ops->pmcsetr.eth1_clk_sel;
@@ -225,7 +226,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
 	}
 
 	/* Need to update PMCCLRR (clear register) */
-	regmap_write(dwmac->regmap, reg + dwmac->ops->syscfg_clr_off,
+	regmap_write(dwmac->regmap, dwmac->ops->syscfg_clr_off,
 		     dwmac->mode_mask);
 
 	/* Update PMCSETR (set register) */
@@ -332,7 +333,7 @@ static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
 	/*  Get ETH_CLK clocks */
 	dwmac->clk_eth_ck = devm_clk_get(dev, "eth-ck");
 	if (IS_ERR(dwmac->clk_eth_ck)) {
-		dev_info(dev, "No phy clock provided...\n");
+		dev_dbg(dev, "No phy clock provided...\n");
 		dwmac->clk_eth_ck = NULL;
 	}
 
-- 
2.25.1

[PATCH v2 07/12] net: ethernet: stm32: clean the way to manage wol irqwake

[Christophe Roullier]

From: Christophe Roullier <christophe.roullier@st.com>

On STM32 platforms it is no longer needed to use a dedicated wakeup to
wake up system from CStop. This patch removes the dedicated wake up usage
and clean the way to register the wake up irq.

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 64 +++++++++----------
 1 file changed, 31 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 1210062f0832a..72dda71850d75 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -81,7 +81,6 @@ struct stm32_dwmac {
 	int enable_eth_ck;
 	int eth_clk_sel_reg;
 	int eth_ref_clk_sel_reg;
-	int irq_pwr_wakeup;
 	u32 mode_reg;		 /* MAC glue-logic mode register */
 	u32 mode_mask;
 	struct regmap *regmap;
@@ -316,9 +315,7 @@ static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
 static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
 			       struct device *dev)
 {
-	struct platform_device *pdev = to_platform_device(dev);
 	struct device_node *np = dev->of_node;
-	int err = 0;
 
 	/* Ethernet PHY have no crystal */
 	dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk");
@@ -350,29 +347,24 @@ static int stm32mp1_parse_data(struct stm32_dwmac *dwmac,
 	if (IS_ERR(dwmac->syscfg_clk))
 		dwmac->syscfg_clk = NULL;
 
-	/* Get IRQ information early to have an ability to ask for deferred
-	 * probe if needed before we went too far with resource allocation.
-	 */
-	dwmac->irq_pwr_wakeup = platform_get_irq_byname_optional(pdev,
-							"stm32_pwr_wakeup");
-	if (dwmac->irq_pwr_wakeup == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-
-	if (!dwmac->clk_eth_ck && dwmac->irq_pwr_wakeup >= 0) {
-		err = device_init_wakeup(&pdev->dev, true);
-		if (err) {
-			dev_err(&pdev->dev, "Failed to init wake up irq\n");
-			return err;
-		}
-		err = dev_pm_set_dedicated_wake_irq(&pdev->dev,
-						    dwmac->irq_pwr_wakeup);
-		if (err) {
-			dev_err(&pdev->dev, "Failed to set wake up irq\n");
-			device_init_wakeup(&pdev->dev, false);
-		}
-		device_set_wakeup_enable(&pdev->dev, false);
+	return 0;
+}
+
+static int stm32_dwmac_wake_init(struct device *dev,
+				 struct stmmac_resources *stmmac_res)
+{
+	int err;
+
+	device_set_wakeup_capable(dev, true);
+
+	err = dev_pm_set_wake_irq(dev, stmmac_res->wol_irq);
+	if (err) {
+		dev_err(dev, "Failed to set wake up irq\n");
+		device_set_wakeup_capable(dev, false);
+		return err;
 	}
-	return err;
+
+	return 0;
 }
 
 static int stm32_dwmac_probe(struct platform_device *pdev)
@@ -410,11 +402,17 @@ static int stm32_dwmac_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	if (stmmac_res.wol_irq && !dwmac->clk_eth_ck) {
+		ret = stm32_dwmac_wake_init(&pdev->dev, &stmmac_res);
+		if (ret)
+			goto err_wake_init_disable;
+	}
+
 	plat_dat->bsp_priv = dwmac;
 
 	ret = stm32_dwmac_init(plat_dat);
 	if (ret)
-		return ret;
+		goto err_wake_init_disable;
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
@@ -424,7 +422,11 @@ static int stm32_dwmac_probe(struct platform_device *pdev)
 
 err_clk_disable:
 	stm32_dwmac_clk_disable(dwmac);
-
+err_wake_init_disable:
+	if (stmmac_res.wol_irq && !dwmac->clk_eth_ck) {
+		dev_pm_clear_wake_irq(&pdev->dev);
+		device_set_wakeup_capable(&pdev->dev, false);
+	}
 	return ret;
 }
 
@@ -432,16 +434,12 @@ static void stm32_dwmac_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct stmmac_priv *priv = netdev_priv(ndev);
-	struct stm32_dwmac *dwmac = priv->plat->bsp_priv;
 
 	stmmac_dvr_remove(&pdev->dev);
-
 	stm32_dwmac_clk_disable(priv->plat->bsp_priv);
 
-	if (dwmac->irq_pwr_wakeup >= 0) {
-		dev_pm_clear_wake_irq(&pdev->dev);
-		device_init_wakeup(&pdev->dev, false);
-	}
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
 }
 
 static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
-- 
2.25.1

[PATCH v2 08/12] net: ethernet: stmmac: stm32: support the phy-supply regulator binding

[Christophe Roullier]

From: Christophe Roullier <christophe.roullier@st.com>

Configure the phy regulator if defined by the "phy-supply" DT phandle.

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 51 ++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 72dda71850d75..31e3abd2caeaa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -14,6 +14,7 @@
 #include <linux/of_net.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -84,6 +85,7 @@ struct stm32_dwmac {
 	u32 mode_reg;		 /* MAC glue-logic mode register */
 	u32 mode_mask;
 	struct regmap *regmap;
+	struct regulator *regulator;
 	u32 speed;
 	const struct stm32_ops *ops;
 	struct device *dev;
@@ -309,6 +311,16 @@ static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
 	if (err)
 		pr_debug("Warning sysconfig register mask not set\n");
 
+	dwmac->regulator = devm_regulator_get_optional(dev, "phy");
+	if (IS_ERR(dwmac->regulator)) {
+		if (PTR_ERR(dwmac->regulator) == -EPROBE_DEFER) {
+			dev_dbg(dev, "phy regulator is not available yet, deferred probing\n");
+			return -EPROBE_DEFER;
+		}
+		dev_dbg(dev, "no regulator found\n");
+		dwmac->regulator = NULL;
+	}
+
 	return 0;
 }
 
@@ -367,6 +379,27 @@ static int stm32_dwmac_wake_init(struct device *dev,
 	return 0;
 }
 
+static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)
+{
+	int ret;
+	struct device *dev = bsp_priv->dev;
+
+	if (!bsp_priv->regulator)
+		return 0;
+
+	if (enable) {
+		ret = regulator_enable(bsp_priv->regulator);
+		if (ret)
+			dev_err(dev, "fail to enable phy-supply\n");
+	} else {
+		ret = regulator_disable(bsp_priv->regulator);
+		if (ret)
+			dev_err(dev, "fail to disable phy-supply\n");
+	}
+
+	return 0;
+}
+
 static int stm32_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -414,12 +447,18 @@ static int stm32_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_wake_init_disable;
 
-	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	ret = phy_power_on(plat_dat->bsp_priv, true);
 	if (ret)
 		goto err_clk_disable;
 
+	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (ret)
+		goto err_gmac_powerdown;
+
 	return 0;
 
+err_gmac_powerdown:
+	phy_power_on(plat_dat->bsp_priv, false);
 err_clk_disable:
 	stm32_dwmac_clk_disable(dwmac);
 err_wake_init_disable:
@@ -440,6 +479,8 @@ static void stm32_dwmac_remove(struct platform_device *pdev)
 
 	dev_pm_clear_wake_irq(&pdev->dev);
 	device_init_wakeup(&pdev->dev, false);
+
+	phy_power_on(priv->plat->bsp_priv, false);
 }
 
 static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
@@ -455,12 +496,20 @@ static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
 	if (dwmac->enable_eth_ck)
 		clk_disable_unprepare(dwmac->clk_eth_ck);
 
+	/* Keep the PHY up if we use Wake-on-Lan. */
+	if (!device_may_wakeup(dwmac->dev))
+		phy_power_on(dwmac, false);
+
 	return ret;
 }
 
 static void stm32mp1_resume(struct stm32_dwmac *dwmac)
 {
 	clk_disable_unprepare(dwmac->clk_ethstp);
+
+	/* The PHY was up for Wake-on-Lan. */
+	if (!device_may_wakeup(dwmac->dev))
+		phy_power_on(dwmac, true);
 }
 
 static int stm32mcu_suspend(struct stm32_dwmac *dwmac)
-- 
2.25.1

[PATCH v2 09/12] ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13

[Christophe Roullier]

Both instances ethernet based on GMAC SNPS IP on stm32mp13.
GMAC IP version is SNPS 4.20.
STM32MP13 is STM32 SOC with 2 GMACs instances.
GMAC IP configure with 1 RX and 1 TX queue.
DMA HW capability register supported
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
TSO supported

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp131.dtsi | 31 ++++++++++++++++++++++++++++
 arch/arm/boot/dts/st/stm32mp133.dtsi | 30 +++++++++++++++++++++++++++
 2 files changed, 61 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index ac90fcbf0c091..d8339eea05d53 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1296,6 +1296,37 @@ sdmmc2: mmc@58007000 {
 			status = "disabled";
 		};
 
+		ethernet1: ethernet@5800a000 {
+			compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+			reg = <0x5800a000 0x2000>;
+			reg-names = "stmmaceth";
+			interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+					      <&exti 68 1>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			clock-names = "stmmaceth",
+				      "mac-clk-tx",
+				      "mac-clk-rx",
+				      "ethstp",
+				      "eth-ck";
+			clocks = <&rcc ETH1MAC>,
+				 <&rcc ETH1TX>,
+				 <&rcc ETH1RX>,
+				 <&rcc ETH1STP>,
+				 <&rcc ETH1CK_K>;
+			st,syscon = <&syscfg 0x4 0xff0000>;
+			snps,mixed-burst;
+			snps,pbl = <2>;
+			snps,axi-config = <&stmmac_axi_config_1>;
+			snps,tso;
+			status = "disabled";
+
+			stmmac_axi_config_1: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
+		};
+
 		usbh_ohci: usb@5800c000 {
 			compatible = "generic-ohci";
 			reg = <0x5800c000 0x1000>;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index df451c3c2a26d..aee855cd2f36b 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -64,5 +64,35 @@ channel@18 {
 				};
 			};
 		};
+
+		ethernet2: ethernet@5800e000 {
+			compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a";
+			reg = <0x5800e000 0x2000>;
+			reg-names = "stmmaceth";
+			interrupts-extended = <&intc GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth",
+				      "mac-clk-tx",
+				      "mac-clk-rx",
+				      "ethstp",
+				      "eth-ck";
+			clocks = <&rcc ETH2MAC>,
+				 <&rcc ETH2TX>,
+				 <&rcc ETH2RX>,
+				 <&rcc ETH2STP>,
+				 <&rcc ETH2CK_K>;
+			st,syscon = <&syscfg 0x4 0xff000000>;
+			snps,mixed-burst;
+			snps,pbl = <2>;
+			snps,axi-config = <&stmmac_axi_config_2>;
+			snps,tso;
+			status = "disabled";
+
+			stmmac_axi_config_2: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
+		};
 	};
 };
-- 
2.25.1

[PATCH v2 10/12] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board

[Christophe Roullier]

Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board.
ethernet1: RMII with crystal.
ethernet2: RMII without crystal.
PHYs used are SMSC (LAN8742A)
Add analog gpio pin configuration ("sleep") to manage power mode on
stm32mp13.

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 71 +++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
index 27e0c3826789d..b2583df813af8 100644
--- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi
@@ -13,6 +13,77 @@ pins {
 		};
 	};
 
+	eth1_rmii_pins_a: eth1-rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('C', 1, AF10)>; /* ETH_RMII_CRS_DV */
+			bias-disable;
+		};
+
+	};
+
+	eth1_rmii_sleep_pins_a: eth1-rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('C', 1, ANALOG)>; /* ETH_RMII_CRS_DV */
+		};
+	};
+
+	eth2_rmii_pins_a: eth2-rmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 11, AF10)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G', 8, AF13)>, /* ETH_RMII_ETHCK */
+				 <STM32_PINMUX('F', 6, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('B', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('E', 2, AF10)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('A', 12, AF11)>; /* ETH_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	eth2_rmii_sleep_pins_a: eth2-rmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RMII_ETHCK */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RMII_RXD1 */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* ETH_RMII_CRS_DV */
+		};
+	};
+
 	i2c1_pins_a: i2c1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
-- 
2.25.1

[PATCH v2 11/12] ARM: dts: stm32: add ethernet1 and ethernet2 for STM32MP135F-DK board

[Christophe Roullier]

Add dual Ethernet:
-Ethernet1: RMII with crystal
-Ethernet2: RMII without crystal
PHYs used are SMSC (LAN8742A)

With Ethernet1, we can performed WoL from PHY instead of GMAC point of view.
(in this case IRQ for WoL is managed as wakeup pin and configured
in OS secure).

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp135f-dk.dts | 48 +++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index eea740d097c72..1316cc16f8dd9 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -19,6 +19,8 @@ / {
 	compatible = "st,stm32mp135f-dk", "st,stm32mp135";
 
 	aliases {
+		ethernet0 = &ethernet1;
+		ethernet1 = &ethernet2;
 		serial0 = &uart4;
 		serial1 = &usart1;
 		serial2 = &uart8;
@@ -93,6 +95,52 @@ channel@12 {
 	};
 };
 
+&ethernet1 {
+	status = "okay";
+	pinctrl-0 = <&eth1_rmii_pins_a>;
+	pinctrl-1 = <&eth1_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0_eth1>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0_eth1: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c131";
+			reset-gpios =  <&mcp23017 9 GPIO_ACTIVE_LOW>;
+			reg = <0>;
+			wakeup-source;
+		};
+	};
+};
+
+&ethernet2 {
+	status = "okay";
+	pinctrl-0 = <&eth2_rmii_pins_a>;
+	pinctrl-1 = <&eth2_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0_eth2>;
+	st,ext-phyclk;
+	phy-supply = <&scmi_v3v3_sw>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0_eth2: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c131";
+			reset-gpios = <&mcp23017 10 GPIO_ACTIVE_LOW>;
+			reg = <0>;
+		};
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c1_pins_a>;
-- 
2.25.1

[PATCH v2 12/12] ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support

[Christophe Roullier]

Need to enable MCP23S08 I/O expanders to manage Ethernet phy
reset in STM32MP135F-DK board
STMMAC driver defer is not silent, need to put this config in
built-in to avoid huge of Ethernet messages

Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 23fc49f23d255..373f58f2d5b98 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -458,6 +458,7 @@ CONFIG_SPI_XILINX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_SPMI=y
 CONFIG_PINCTRL_AS3722=y
+CONFIG_PINCTRL_MCP23S08=y
 CONFIG_PINCTRL_MICROCHIP_SGPIO=y
 CONFIG_PINCTRL_OCELOT=y
 CONFIG_PINCTRL_PALMAS=y
-- 
2.25.1

Re: [PATCH v2 02/12] dt-bindings: net: add new property st,ext-phyclk in documentation for stm32

[Rob Herring]

On Thu, 28 Sep 2023 14:24:17 +0200, Christophe Roullier wrote:
> Add property st,ext-phyclk to manage cases when PHY have no cristal/quartz
> This property can be used with RMII phy without cristal 50Mhz and when we
> want to select RCC clock instead of ETH_REF_CLK
> Can be used also with RGMII phy with no cristal and we select RCC clock
> instead of ETH_CLK125
> This new property replace st,eth-clk-sel and st,eth-ref-clk-sel
> 
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> ---
>  Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:82:6: [warning] wrong indentation: expected 4 but found 5 (indentation)
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:83:7: [warning] wrong indentation: expected 7 but found 6 (indentation)
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:86:5: [error] syntax error: expected <block end>, but found '<block mapping start>' (syntax)

dtschema/dtc warnings/errors:
make[2]: *** Deleting file 'Documentation/devicetree/bindings/net/stm32-dwmac.example.dts'
Documentation/devicetree/bindings/net/stm32-dwmac.yaml:86:5: did not find expected key
make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/stm32-dwmac.example.dts] Error 1
make[2]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:86:5: did not find expected key
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/stm32-dwmac.yaml: ignoring, error parsing file
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1427: dt_binding_check] Error 2
make: *** [Makefile:234: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230928122427.313271-3-christophe.roullier@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 02/12] dt-bindings: net: add new property st,ext-phyclk in documentation for stm32

[Rob Herring]

On Thu, Sep 28, 2023 at 02:24:17PM +0200, Christophe Roullier wrote:
> Add property st,ext-phyclk to manage cases when PHY have no cristal/quartz
> This property can be used with RMII phy without cristal 50Mhz and when we
> want to select RCC clock instead of ETH_REF_CLK
> Can be used also with RGMII phy with no cristal and we select RCC clock

typo

> instead of ETH_CLK125
> This new property replace st,eth-clk-sel and st,eth-ref-clk-sel

Certainly 1 property is better than 2 for me, but carrying 3 is not 
great. I don't understand why the we need a new property. What can't be 
supported with the existing properties?

> 
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> ---
>  Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> index ca976281bfc22..54fda8b052abc 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -78,12 +78,21 @@ properties:
>        encompases the glue register, the offset of the control register and
>        the mask to set bitfield in control register
>  
> +  st,ext-phyclk:
> +     description:
> +      set this property in RMII mode when you have PHY without crystal 50MHz and want to
> +      select RCC clock instead of ETH_REF_CLK. or in RGMII mode when you want to select
> +      RCC clock instead of ETH_CLK125.
> +    type: boolean

It's not clear to me what 'external' (assuming that's what 'ext' is 
short for) means. A crystal is external to the PHY too. So it means 'the 
PHY has no crystal'? That's a property of the PHY though, so it should 
be in the PHY's node. If you want this in the MAC node, then name the 
property and make the description primarily about the MAC modes.

> +
>    st,eth-clk-sel:
> +    deprecated: true
>      description:
>        set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
>      type: boolean
>  
>    st,eth-ref-clk-sel:
> +    deprecated: true
>      description:
>        set this property in RMII mode when you have PHY without crystal 50MHz and want to
>        select RCC clock instead of ETH_REF_CLK.
> -- 
> 2.25.1
> 

Re: [PATCH v2 08/12] net: ethernet: stmmac: stm32: support the phy-supply regulator binding

[Andrew Lunn]

> +static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)

I find this function name confusing, since 50% of the time it does not
actually power the PHY on. You never call it with anything other than
a static true/false value. So it might was well be two functions,
phy_power_on() and phy_power_off().

> +{
> +	int ret;
> +	struct device *dev = bsp_priv->dev;
> +
> +	if (!bsp_priv->regulator)
> +		return 0;
> +
> +	if (enable) {
> +		ret = regulator_enable(bsp_priv->regulator);
> +		if (ret)
> +			dev_err(dev, "fail to enable phy-supply\n");

Not all PHYs are usable in 0 picoseconds. You probably want a delay
here. Otherwise the first few accesses to it might not work.

      Andrew

Re: [PATCH v2 08/12] net: ethernet: stmmac: stm32: support the phy-supply regulator binding

[Christophe ROULLIER]

On 9/28/23 19:53, Andrew Lunn wrote:
>> +static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)
> I find this function name confusing, since 50% of the time it does not
> actually power the PHY on. You never call it with anything other than
> a static true/false value. So it might was well be two functions,
> phy_power_on() and phy_power_off().

Hi,

I wanted to keep same implementation of all others Ethernet glues 
(dwmac-rk.c ...) to be consistent.

>> +{
>> +	int ret;
>> +	struct device *dev = bsp_priv->dev;
>> +
>> +	if (!bsp_priv->regulator)
>> +		return 0;
>> +
>> +	if (enable) {
>> +		ret = regulator_enable(bsp_priv->regulator);
>> +		if (ret)
>> +			dev_err(dev, "fail to enable phy-supply\n");
> Not all PHYs are usable in 0 picoseconds. You probably want a delay
> here. Otherwise the first few accesses to it might not work.
>
>        Andrew

You're right I will add a delay.

Thanks

Christophe