From: Pavan Chebbi <pavan.chebbi@broadcom.com>
To: davem@davemloft.net, kuba@kernel.org, netdev@vger.kernel.org
Cc: michael.chan@broadcom.com, gospo@broadcom.com, pabeni@redhat.com,
edumazet@google.com, richardcochran@gmail.com,
Pavan Chebbi <pavan.chebbi@broadcom.com>,
Simon White <Simon.White@viavisolutions.com>,
Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Subject: [PATCH net-next] tg3: Improve PTP TX timestamping logic
Date: Fri, 13 Oct 2023 06:59:19 -0700 [thread overview]
Message-ID: <20231013135919.408357-1-pavan.chebbi@broadcom.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 6347 bytes --]
When we are trying to timestamp a TX packet, there may be
occasions when the TX timestamp register is still not
updated with the latest timestamp even if the timestamp
packet descriptor is marked as complete.
This usually happens in cases where the system is under
stress or flow control is affecting the transmit side.
We will solve this problem by saving the snapshot of the
timestamp register when we are posting the TX descriptor.
At this time, the register contains previously timestamped
packet's value and valid timestamp of the current packet must
be different than this.
Upon completion of the current descriptor, we will check if
the timestamp register is updated or not before timestamping
the skb. If not updated, we will schedule the ptp worker to
fetch the updated time later and timestamp the skb.
Also now we restrict number of outstanding PTP TX packet
requests to 1.
Reported-by: Simon White <Simon.White@viavisolutions.com>
Link: https://lore.kernel.org/netdev/CACKFLikGdN9XPtWk-fdrzxdcD=+bv-GHBvfVfSpJzHY7hrW39g@mail.gmail.com/
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
---
drivers/net/ethernet/broadcom/tg3.c | 81 +++++++++++++++++++++++------
drivers/net/ethernet/broadcom/tg3.h | 3 ++
2 files changed, 68 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 14b311196b8f..59896bbf9e73 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -6314,6 +6314,46 @@ static int tg3_ptp_enable(struct ptp_clock_info *ptp,
return -EOPNOTSUPP;
}
+static void tg3_hwclock_to_timestamp(struct tg3 *tp, u64 hwclock,
+ struct skb_shared_hwtstamps *timestamp)
+{
+ memset(timestamp, 0, sizeof(struct skb_shared_hwtstamps));
+ timestamp->hwtstamp = ns_to_ktime((hwclock & TG3_TSTAMP_MASK) +
+ tp->ptp_adjust);
+}
+
+static void tg3_read_tx_tstamp(struct tg3 *tp, u64 *hwclock)
+{
+ *hwclock = tr32(TG3_TX_TSTAMP_LSB);
+ *hwclock |= (u64)tr32(TG3_TX_TSTAMP_MSB) << 32;
+}
+
+static long tg3_ptp_ts_aux_work(struct ptp_clock_info *ptp)
+{
+ struct tg3 *tp = container_of(ptp, struct tg3, ptp_info);
+ struct skb_shared_hwtstamps timestamp;
+ u64 hwclock;
+
+ if (tp->ptp_txts_retrycnt > 2)
+ goto done;
+
+ tg3_read_tx_tstamp(tp, &hwclock);
+
+ if (hwclock != tp->pre_tx_ts) {
+ tg3_hwclock_to_timestamp(tp, hwclock, ×tamp);
+ skb_tstamp_tx(tp->tx_tstamp_skb, ×tamp);
+ goto done;
+ }
+ tp->ptp_txts_retrycnt++;
+ return HZ / 10;
+done:
+ dev_consume_skb_any(tp->tx_tstamp_skb);
+ tp->tx_tstamp_skb = NULL;
+ tp->ptp_txts_retrycnt = 0;
+ tp->pre_tx_ts = 0;
+ return -1;
+}
+
static const struct ptp_clock_info tg3_ptp_caps = {
.owner = THIS_MODULE,
.name = "tg3 clock",
@@ -6325,19 +6365,12 @@ static const struct ptp_clock_info tg3_ptp_caps = {
.pps = 0,
.adjfine = tg3_ptp_adjfine,
.adjtime = tg3_ptp_adjtime,
+ .do_aux_work = tg3_ptp_ts_aux_work,
.gettimex64 = tg3_ptp_gettimex,
.settime64 = tg3_ptp_settime,
.enable = tg3_ptp_enable,
};
-static void tg3_hwclock_to_timestamp(struct tg3 *tp, u64 hwclock,
- struct skb_shared_hwtstamps *timestamp)
-{
- memset(timestamp, 0, sizeof(struct skb_shared_hwtstamps));
- timestamp->hwtstamp = ns_to_ktime((hwclock & TG3_TSTAMP_MASK) +
- tp->ptp_adjust);
-}
-
/* tp->lock must be held */
static void tg3_ptp_init(struct tg3 *tp)
{
@@ -6368,6 +6401,8 @@ static void tg3_ptp_fini(struct tg3 *tp)
ptp_clock_unregister(tp->ptp_clock);
tp->ptp_clock = NULL;
tp->ptp_adjust = 0;
+ dev_consume_skb_any(tp->tx_tstamp_skb);
+ tp->tx_tstamp_skb = NULL;
}
static inline int tg3_irq_sync(struct tg3 *tp)
@@ -6538,6 +6573,7 @@ static void tg3_tx(struct tg3_napi *tnapi)
while (sw_idx != hw_idx) {
struct tg3_tx_ring_info *ri = &tnapi->tx_buffers[sw_idx];
+ bool complete_skb_later = false;
struct sk_buff *skb = ri->skb;
int i, tx_bug = 0;
@@ -6548,12 +6584,17 @@ static void tg3_tx(struct tg3_napi *tnapi)
if (tnapi->tx_ring[sw_idx].len_flags & TXD_FLAG_HWTSTAMP) {
struct skb_shared_hwtstamps timestamp;
- u64 hwclock = tr32(TG3_TX_TSTAMP_LSB);
- hwclock |= (u64)tr32(TG3_TX_TSTAMP_MSB) << 32;
-
- tg3_hwclock_to_timestamp(tp, hwclock, ×tamp);
+ u64 hwclock;
- skb_tstamp_tx(skb, ×tamp);
+ tg3_read_tx_tstamp(tp, &hwclock);
+ if (hwclock != tp->pre_tx_ts) {
+ tg3_hwclock_to_timestamp(tp, hwclock, ×tamp);
+ skb_tstamp_tx(skb, ×tamp);
+ tp->pre_tx_ts = 0;
+ } else {
+ tp->tx_tstamp_skb = skb;
+ complete_skb_later = true;
+ }
}
dma_unmap_single(&tp->pdev->dev, dma_unmap_addr(ri, mapping),
@@ -6591,7 +6632,10 @@ static void tg3_tx(struct tg3_napi *tnapi)
pkts_compl++;
bytes_compl += skb->len;
- dev_consume_skb_any(skb);
+ if (!complete_skb_later)
+ dev_consume_skb_any(skb);
+ else
+ ptp_schedule_worker(tp->ptp_clock, 0);
if (unlikely(tx_bug)) {
tg3_tx_recover(tp);
@@ -8028,8 +8072,13 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
if ((unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) &&
tg3_flag(tp, TX_TSTAMP_EN)) {
- skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
- base_flags |= TXD_FLAG_HWTSTAMP;
+ tg3_full_lock(tp, 0);
+ if (!tp->pre_tx_ts) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ base_flags |= TXD_FLAG_HWTSTAMP;
+ tg3_read_tx_tstamp(tp, &tp->pre_tx_ts);
+ }
+ tg3_full_unlock(tp);
}
len = skb_headlen(skb);
diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index 1000c894064f..ae5c01bd1110 100644
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -3190,6 +3190,7 @@ struct tg3 {
struct ptp_clock_info ptp_info;
struct ptp_clock *ptp_clock;
s64 ptp_adjust;
+ u8 ptp_txts_retrycnt;
/* begin "tx thread" cacheline section */
void (*write32_tx_mbox) (struct tg3 *, u32,
@@ -3372,6 +3373,8 @@ struct tg3 {
struct tg3_hw_stats *hw_stats;
dma_addr_t stats_mapping;
struct work_struct reset_task;
+ struct sk_buff *tx_tstamp_skb;
+ u64 pre_tx_ts;
int nvram_lock_cnt;
u32 nvram_size;
--
2.39.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]
next reply other threads:[~2023-10-13 13:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-13 13:59 Pavan Chebbi [this message]
2023-10-15 13:40 ` [PATCH net-next] tg3: Improve PTP TX timestamping logic patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231013135919.408357-1-pavan.chebbi@broadcom.com \
--to=pavan.chebbi@broadcom.com \
--cc=Simon.White@viavisolutions.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gospo@broadcom.com \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=kuba@kernel.org \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).