From: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
To: <netdev@vger.kernel.org>
Cc: <davem@davemloft.net>, <kuba@kernel.org>,
<Bryan.Whitehead@microchip.com>, <linux-kernel@vger.kernel.org>,
<andrew@lunn.ch>, <linux@armlinux.org.uk>,
<UNGLinuxDriver@microchip.com>
Subject: [PATCH net-next V1 1/7] net: lan743x: Create separate PCS power reset function
Date: Tue, 17 Oct 2023 15:12:02 +0530 [thread overview]
Message-ID: <20231017094208.4956-2-Raju.Lakkaraju@microchip.com> (raw)
In-Reply-To: <20231017094208.4956-1-Raju.Lakkaraju@microchip.com>
Create separate PCS power reset function from lan743x_sgmii_config () to use
as subroutine.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
---
drivers/net/ethernet/microchip/lan743x_main.c | 55 ++++++++++---------
1 file changed, 29 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index f940895b14e8..1432032b795b 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -1145,12 +1145,39 @@ static int lan743x_pcs_seq_state(struct lan743x_adapter *adapter, u8 state)
return 0;
}
+static int lan743x_pcs_power_reset(struct lan743x_adapter *adapter)
+{
+ int mii_ctl;
+ int ret;
+
+ /* SGMII/1000/2500BASE-X PCS power down */
+ mii_ctl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
+ if (mii_ctl < 0)
+ return mii_ctl;
+
+ mii_ctl |= BMCR_PDOWN;
+ ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
+ if (ret < 0)
+ return ret;
+
+ ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_DOWN);
+ if (ret < 0)
+ return ret;
+
+ /* SGMII/1000/2500BASE-X PCS power up */
+ mii_ctl &= ~BMCR_PDOWN;
+ ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
+ if (ret < 0)
+ return ret;
+
+ return lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_UP);
+}
+
static int lan743x_sgmii_config(struct lan743x_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
struct phy_device *phydev = netdev->phydev;
enum lan743x_sgmii_lsd lsd = POWER_DOWN;
- int mii_ctl;
bool status;
int ret;
@@ -1207,31 +1234,7 @@ static int lan743x_sgmii_config(struct lan743x_adapter *adapter)
netif_dbg(adapter, drv, adapter->netdev,
"SGMII 1G mode enable\n");
- /* SGMII/1000/2500BASE-X PCS power down */
- mii_ctl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
- if (mii_ctl < 0)
- return mii_ctl;
-
- mii_ctl |= BMCR_PDOWN;
- ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
- if (ret < 0)
- return ret;
-
- ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_DOWN);
- if (ret < 0)
- return ret;
-
- /* SGMII/1000/2500BASE-X PCS power up */
- mii_ctl &= ~BMCR_PDOWN;
- ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
- if (ret < 0)
- return ret;
-
- ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_UP);
- if (ret < 0)
- return ret;
-
- return 0;
+ return lan743x_pcs_power_reset(adapter);
}
static void lan743x_mac_set_address(struct lan743x_adapter *adapter,
--
2.34.1
next prev parent reply other threads:[~2023-10-17 9:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-17 9:42 [PATCH net-next V1 0/7] Add support to PHYLINK and SFP for PCI11x1x chips Raju Lakkaraju
2023-10-17 9:42 ` Raju Lakkaraju [this message]
2023-10-17 9:42 ` [PATCH net-next V1 2/7] net: lan743x: Create separate Link Speed Duplex state function Raju Lakkaraju
2023-10-17 9:42 ` [PATCH net-next V1 3/7] net: lan743x: Add SFP support check flag Raju Lakkaraju
2023-10-17 9:42 ` [PATCH net-next V1 4/7] net: lan743x: Add support to software-nodes for sfp and phylink Raju Lakkaraju
2023-10-17 9:42 ` [PATCH net-next V1 5/7] net: lan743x: Register the platform device for sfp pluggable module Raju Lakkaraju
2023-10-17 9:42 ` [PATCH net-next V1 6/7] net: lan743x: Add support to the phylink framework Raju Lakkaraju
2023-10-17 10:46 ` Russell King (Oracle)
2023-10-17 9:42 ` [PATCH net-next V1 7/7] net: lan743x: Add support to ethtool phylink get and set settings Raju Lakkaraju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231017094208.4956-2-Raju.Lakkaraju@microchip.com \
--to=raju.lakkaraju@microchip.com \
--cc=Bryan.Whitehead@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).