From: Christoph Hellwig <hch@lst.de>
To: Greg Ungerer <gerg@linux-m68k.org>, iommu@lists.linux.dev
Cc: Robin Murphy <robin.murphy@arm.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Wei Fang <wei.fang@nxp.com>, Shenwei Wang <shenwei.wang@nxp.com>,
Clark Wang <xiaoning.wang@nxp.com>,
NXP Linux Team <linux-imx@nxp.com>,
linux-m68k@lists.linux-m68k.org, netdev@vger.kernel.org
Subject: [PATCH 6/8] net: fec: use dma_alloc_noncoherent for data cache enabled coldfire
Date: Fri, 20 Oct 2023 07:40:22 +0200 [thread overview]
Message-ID: <20231020054024.78295-7-hch@lst.de> (raw)
In-Reply-To: <20231020054024.78295-1-hch@lst.de>
Coldfire platforms with data caches can't properly implement
dma_alloc_coherent and currently just return noncoherent memory from
dma_alloc_coherent.
The fec driver than works around this with a flush of all caches in the
receive path. Make this hack a little less bad by using the explicit
dma_alloc_noncoherent API and documenting the hacky cache flushes so
that the DMA API level hack can be removed.
Also replace the check for CONFIG_M532x for said hack with a check
for COLDFIRE && !COLDFIRE_COHERENT_DMA. While m532x is the only such
platform with a fec module, this makes the code more consistent and
easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
---
drivers/net/ethernet/freescale/fec_main.c | 86 ++++++++++++++++++++---
1 file changed, 76 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 77c8e9cfb44562..c5e370570f6ec6 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -406,6 +406,70 @@ static void fec_dump(struct net_device *ndev)
} while (bdp != txq->bd.base);
}
+/*
+ * Coldfire does not support DMA coherent allocations, and has historically used
+ * a band-aid with a manual flush in fec_enet_rx_queue.
+ */
+#if defined(CONFIG_COLDFIRE) && !defined(CONFIG_COLDFIRE_COHERENT_DMA)
+static void *fec_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+ gfp_t gfp)
+{
+ return dma_alloc_noncoherent(dev, size, handle, DMA_BIDIRECTIONAL, gfp);
+}
+
+static void fec_dma_free(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t handle)
+{
+ dma_free_noncoherent(dev, size, cpu_addr, handle, DMA_BIDIRECTIONAL);
+}
+#else /* !CONFIG_COLDFIRE || CONFIG_COLDFIRE_COHERENT_DMA */
+static void *fec_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+ gfp_t gfp)
+{
+ return dma_alloc_coherent(dev, size, handle, gfp);
+}
+
+static void fec_dma_free(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t handle)
+{
+ dma_free_coherent(dev, size, cpu_addr, handle);
+}
+#endif /* !CONFIG_COLDFIRE || CONFIG_COLDFIRE_COHERENT_DMA */
+
+struct fec_dma_devres {
+ size_t size;
+ void *vaddr;
+ dma_addr_t dma_handle;
+};
+
+static void fec_dmam_release(struct device *dev, void *res)
+{
+ struct fec_dma_devres *this = res;
+
+ fec_dma_free(dev, this->size, this->vaddr, this->dma_handle);
+}
+
+static void *fec_dmam_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+ gfp_t gfp)
+{
+ struct fec_dma_devres *dr;
+ void *vaddr;
+
+ dr = devres_alloc(fec_dmam_release, sizeof(*dr), gfp);
+ if (!dr)
+ return NULL;
+ vaddr = fec_dma_alloc(dev, size, handle, gfp);
+ if (!vaddr) {
+ devres_free(dr);
+ return NULL;
+ }
+ dr->vaddr = vaddr;
+ dr->dma_handle = *handle;
+ dr->size = size;
+ devres_add(dev, dr);
+ return vaddr;
+}
+
static inline bool is_ipv4_pkt(struct sk_buff *skb)
{
return skb->protocol == htons(ETH_P_IP) && ip_hdr(skb)->version == 4;
@@ -1660,7 +1724,11 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
}
#endif
-#ifdef CONFIG_M532x
+#if defined(CONFIG_COLDFIRE) && !defined(CONFIG_COLDFIRE_COHERENT_DMA)
+ /*
+ * Hacky flush of all caches instead of using the DMA API for the TSO
+ * headers.
+ */
flush_cache_all();
#endif
rxq = fep->rx_queue[queue_id];
@@ -3288,10 +3356,9 @@ static void fec_enet_free_queue(struct net_device *ndev)
for (i = 0; i < fep->num_tx_queues; i++)
if (fep->tx_queue[i] && fep->tx_queue[i]->tso_hdrs) {
txq = fep->tx_queue[i];
- dma_free_coherent(&fep->pdev->dev,
- txq->bd.ring_size * TSO_HEADER_SIZE,
- txq->tso_hdrs,
- txq->tso_hdrs_dma);
+ fec_dma_free(&fep->pdev->dev,
+ txq->bd.ring_size * TSO_HEADER_SIZE,
+ txq->tso_hdrs, txq->tso_hdrs_dma);
}
for (i = 0; i < fep->num_rx_queues; i++)
@@ -3321,10 +3388,9 @@ static int fec_enet_alloc_queue(struct net_device *ndev)
txq->tx_stop_threshold = FEC_MAX_SKB_DESCS;
txq->tx_wake_threshold = FEC_MAX_SKB_DESCS + 2 * MAX_SKB_FRAGS;
- txq->tso_hdrs = dma_alloc_coherent(&fep->pdev->dev,
+ txq->tso_hdrs = fec_dma_alloc(&fep->pdev->dev,
txq->bd.ring_size * TSO_HEADER_SIZE,
- &txq->tso_hdrs_dma,
- GFP_KERNEL);
+ &txq->tso_hdrs_dma, GFP_KERNEL);
if (!txq->tso_hdrs) {
ret = -ENOMEM;
goto alloc_failed;
@@ -4043,8 +4109,8 @@ static int fec_enet_init(struct net_device *ndev)
bd_size = (fep->total_tx_ring_size + fep->total_rx_ring_size) * dsize;
/* Allocate memory for buffer descriptors. */
- cbd_base = dmam_alloc_coherent(&fep->pdev->dev, bd_size, &bd_dma,
- GFP_KERNEL);
+ cbd_base = fec_dmam_alloc(&fep->pdev->dev, bd_size, &bd_dma,
+ GFP_KERNEL);
if (!cbd_base) {
ret = -ENOMEM;
goto free_queue_mem;
--
2.39.2
next prev parent reply other threads:[~2023-10-20 5:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-20 5:40 fix the non-coherent coldfire dma_alloc_coherent v4 Christoph Hellwig
2023-10-20 5:40 ` [PATCH 1/8] dma-direct: add depdenencies to CONFIG_DMA_GLOBAL_POOL Christoph Hellwig
2023-10-20 7:18 ` Geert Uytterhoeven
2023-10-23 5:50 ` Christoph Hellwig
2023-10-20 5:40 ` [PATCH 2/8] dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol Christoph Hellwig
2023-10-20 5:40 ` [PATCH 3/8] dma-direct: simplify the use atomic pool logic in dma_direct_alloc Christoph Hellwig
2023-10-20 5:40 ` [PATCH 4/8] dma-direct: warn when coherent allocations aren't supported Christoph Hellwig
2023-10-20 5:40 ` [PATCH 5/8] m68k: use the coherent DMA code for coldfire without data cache Christoph Hellwig
2023-10-20 5:40 ` Christoph Hellwig [this message]
2023-10-20 5:40 ` [PATCH 7/8] m68k: don't provide arch_dma_alloc for nommu/coldfire Christoph Hellwig
2023-10-20 5:40 ` [PATCH 8/8] m68k: remove unused includes from dma.c Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231020054024.78295-7-hch@lst.de \
--to=hch@lst.de \
--cc=geert@linux-m68k.org \
--cc=gerg@linux-m68k.org \
--cc=iommu@lists.linux.dev \
--cc=linux-imx@nxp.com \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=m.szyprowski@samsung.com \
--cc=netdev@vger.kernel.org \
--cc=robin.murphy@arm.com \
--cc=shenwei.wang@nxp.com \
--cc=wei.fang@nxp.com \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).